Gibson Freezer Relay, Overload, Capacitor
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304464438
Refrigerator not cooling or compressor won't start? A failed run capacitor prevents the compressor from running. DIY repair in 10-15 minutes with video guide.
This part fixes the following symptoms
-
Won't start
-
Too warm
-
Fridge too warm
-
Freezer section too warm
See more...
Do-It-Yourself Stories from Customers like You
My Frigidaire frost free commercial freezer was screeching louder than the wheels on my radio flyer red wagon when it was overloaded with 5 cent return for deposit coca cola bottles back in the 1960's Daniel G. • El Paso , TX • January 24, 2021
In short - I replaced the evaporator fan motor and the evaporator fan blade.
The Appliance Parts Pros website was extremely helpful to me. Here's how.
1. The site helped me identify that even though my Freezer says it's a Frigidaire, it's actually an Electrolux.
2. The site identified the potential screech causing parts. (I didn't take a chance, I bought all three) It was a worthwhile investment. My freezer is 20 years old so it deserved some help.
3. The site provided guidance videos (not...
Read more
More
$37.95
- Compare At:
-
$45.16
- You Save:
-
$7.21
Genuine Frigidaire part
By: Frigidaire
Part Number: 218909912
Freezer won't start or compressor hums but doesn't run? A failed run capacitor is often the cause. DIY-friendly repair, typically done in under an hour.
This part fixes the following symptoms
-
Won't start
-
Freezer section too warm
See more...
Do-It-Yourself Stories from Customers like You
Freezer would not start Thomas C. • Oxford , GA • October 03, 2014
Looked for obvious signs of mal-function, burned wires, etc. I found that the compressor controller(attached to the compressor) had an obvious burned-out spot. Took a chance that was the problem (it was); ordered all new OEM parts, including a new timer and run capacitor (a part that kicks in every time the compressor starts). I received the parts at 1 PM EST; by 1:48 PM I had the freezer working. Easily saved $250.00. A nice aside was that an Internet competitor was asking $53.00 for the same...
Read more
More
$59.95
- Compare At:
-
$70.74
- You Save:
-
$10.79
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304491584
This controller kit is the electronic oven control module that governs bake, broil, and temperature functions. Replacing a failing control restores accurate oven operation and responsive keypad/display performance.
- Regulates oven heating cycles and temperature feedback from the sensor
- Controls bake/broil relays and user interface responses
- Common failure symptoms: no bake/broil, temperature inaccuracy, unresponsive buttons, blank or erroring display
- May recover from intermittent power-up, beeping, or F-codes tied to the control
What's included: One control board with kit-specific components per OEM packaging Install notes:
- Disconnect power before servicing; high voltage is present
- Handle the board by edges; avoid static discharge to components
- Transfer all wiring one connector at a time to the matching locations
- After installation, restore power and verify oven operation and temperature calibration
Do-It-Yourself Stories from Customers like You
Freezer would not start Thomas C. • Oxford , GA • October 03, 2014
Looked for obvious signs of mal-function, burned wires, etc. I found that the compressor controller(attached to the compressor) had an obvious burned-out spot. Took a chance that was the problem (it was); ordered all new OEM parts, including a new timer and run capacitor (a part that kicks in every time the compressor starts). I received the parts at 1 PM EST; by 1:48 PM I had the freezer working. Easily saved $250.00. A nice aside was that an Internet competitor was asking $53.00 for the same...
Read more
More
$72.95
- Compare At:
-
$86.08
- You Save:
-
$13.13
Genuine Frigidaire part
By: Frigidaire
Part Number: 216594300
The Starter is an OEM replacement part for Frigidaire refrigerators. This component is crucial for initiating the compressor, which is responsible for cooling the refrigerator. The starter works by providing the necessary electrical power to get the compressor running, ensuring that the refrigerator maintains the correct temperature.
Causes of a bad starter can include electrical malfunctions, wear and tear over time, or damage from power surges. A faulty starter can prevent the compressor from starting, leading to cooling issues.
Symptoms of a bad Starter include:
- The refrigerator not cooling properly
- The compressor not running or frequently cycling on and off
- Unusual clicking or buzzing noises from the compressor area
- The refrigerator being warmer than usual or food spoiling quickly
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Overload protector done its job we had not defrosted the freezer for a long time causing the compressor to run more than it should it got overloaded found it defrosting Wanda L. • Belle Rose , LA • December 09, 2014
First checked the power then took off the compresser connections cover looked for burnt wires or loose or disconnected wires they were none of those I then removed the wires from the starter an overload protector removed them checked both for contunuaty overload protector no contunuaty then I checked the 3 poles on the comp. for contunuaty they were ok then I checked each pole to ground on the com. to final check that the comp. was still good
Read more
More
$42.95
- Compare At:
-
$51.11
- You Save:
-
$8.16
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304491585
This controller kit replaces the appliance's electronic control board, restoring proper power-up, keypad/display response, and reliable operation of controlled functions. Use it to address unresponsive controls or erratic behavior caused by a failed control board. What it does:
- Manages operation of key components based on sensor inputs and user settings
- Processes keypad/remote commands and powers display, mode, and timer circuits
- Coordinates temperature feedback to maintain selected settings
- Common failure symptoms include no display, unresponsive buttons, will not start, intermittent cycling, or error codes
What's included:
Install notes:
- Disconnect power before servicing; allow capacitors to discharge
- Use ESD precautions; handle the board by the edges only
- Access the control compartment; photograph wiring and move connectors one at a time to the new board
- Securely mount the board, restore power, and test all functions
Do-It-Yourself Stories from Customers like You
Controller and capacitor that start the compressor in our freezer failed and burned causing burning plastic smell. M. H. • Madison , MS • December 08, 2020
An appliance repairman came to diagnose the issue causing the burning smell and the reason the 17- year old Frigidaire freezer was not cooling. He plugged the freezer back in and it immediately flamed up revealing the failed power overload controller. He tested the controller and the attached capacitor and found they had both failed. He quoted $556 to replace the failed parts to resolve the issue. We initially decided the replace the whole freezer given its age, but due to the China virus,...
Read more
More
$76.95
- Compare At:
-
$95.57
- You Save:
-
$18.62
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304491583
This controller kit is the appliance's main electronic control. It reads inputs from the user interface and sensors to power and coordinate key components. Replacing a failed controller restores responsive controls and consistent, reliable operation.
- Interprets commands from the keypad and sensors to manage operation
- Controls relays powering motors, fans, compressor, or valves as designed
- Coordinates modes and cycle timing for proper performance
- Common symptoms: dead or blank display, unresponsive buttons, won't start, intermittent shutdowns, or error codes
What's included: 1 controller kit Installation notes:
- Disconnect power at the breaker or unplug the appliance before servicing
- Handle the board with ESD precautions; avoid touching connectors and components
- Photograph/label wire connections and transfer them one at a time to the new board
- After installation, verify any model-specific settings per the service documentation before testing
Do-It-Yourself Stories from Customers like You
Feezor would not run Russell B. • Groton , CT • February 15, 2016
Replaced controller and starter relay
Read more
More
$77.95
- Compare At:
-
$93.54
- You Save:
-
$15.59
Genuine Frigidaire part
By: Frigidaire
Part Number: 216954200
This Temperature Controller regulates cooling by switching power to the compressor and related circuits to hold the set temperature. Replacing a failing controller restores accurate temperature control and reliable operation. What it does:
- Cycles cooling components to maintain the temperature you set
- Helps keep cabinet temperatures consistent for proper food storage
- Coordinates on/off operation to prevent overcooling or warm conditions
- Common failure symptoms: too warm or too cold, runs constantly or won't start, control/dial unresponsive
What's included:
Install notes:
- Disconnect power before servicing—this is a line-voltage control
- Access the control area, label or photograph wire positions, and move wires one at a time to the new controller
- Reuse existing mounting hardware and any knob/overlay as applicable
- After install, set to mid setting and allow up to 24 hours for temperatures to stabilize
Do-It-Yourself Stories from Customers like You
Trying to start and relay or overload just clicking off and on William K. • Morganton , NC • November 28, 2015
Works perfect now
Read more
More
$53.95
- Compare At:
-
$75.66
- You Save:
-
$21.71
Genuine Frigidaire part
By: Frigidaire
Part Number: 241707705
Refrigerator won't cool or compressor clicks but won't start? This PTC start relay powers the compressor's start winding. Common DIY fix, restores cooling.
Do-It-Yourself Stories from Customers like You
Both overload and run capacitor burnt out Sione T. • Washington , DC • September 02, 2017
I ordered the compressor starting device kit and run capacitor to replace the burnt parts. It works right off the bat! The parts are for a Kenmore fridge/freezer. Saves Money and a trip to Dumping place. Great product and great Price. This is the second time I fix friends fridge/freezer with this repair kit from this site. Great Service!
Read more
More
$44.62
- Compare At:
-
$52.65
- You Save:
-
$8.03
Genuine Frigidaire part
By: Frigidaire
Part Number: 216954202
This electronic control board manages the appliance's user interface and core control functions, restoring reliable operation when the original board fails. It replaces a damaged or unresponsive control module to help regain normal appliance control. What it does:
- Sends and receives signals to operate timers, relays, and display functions.
- Controls user inputs and on/off sequencing for the appliance's systems.
- Common symptoms of a failing board: unresponsive controls, blank or erratic display, cycles not starting or stopping, or intermittent operation.
- Use this board to replace units exhibiting control or display faults that other components have not resolved.
What's included: One electronic control board (assembly). Install notes:
- Disconnect power at the breaker or unplug the appliance before starting any repair.
- Handle the board by the edges and avoid touching components; use an ESD strap if available.
- Verify wiring harness connections and fuses before and after installation.
Do-It-Yourself Stories from Customers like You
Fairly certain multiple brown outs burn the part out Mark M. • Franklin Furnace , OH • November 16, 2019
When the part arrived finally, 10 minute's later the refrigerator was working. Note: FedEx was not the fastest way, the part set days at their facility before moving to another. Finally, it was transferred to USPS and delivery was made by my postman.
Read more
More
$54.95
- Compare At:
-
$65.39
- You Save:
-
$10.44
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304493950
Fix a clicking compressor or refrigerator that won't cool. This start relay and overload assembly restores compressor startup. DIY repair in 10-15 minutes.
Do-It-Yourself Stories from Customers like You
Fan ran but compressor won't turn on Edward S. • Cypress , TX • May 13, 2019
I replaced the relay assembly, and the freezer works better than new
Read more
More
$74.95
- Compare At:
-
$89.19
- You Save:
-
$14.24
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304413178
Freezer won't start or starts intermittently? This electrical relay assembly restores reliable power switching to get your freezer running again.
Do-It-Yourself Stories from Customers like You
Relay switch failure Robert O. • Sabina , OH • June 28, 2015
Replaced relay switch electric assembly
Read more
More
$94.36
- Compare At:
-
$113.23
- You Save:
-
$18.87
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304499966
Fix a refrigerator that won't cool or start. This compressor start relay helps your compressor run reliably and prevents clicking sounds. Easy DIY repair.
More
$61.95
- Compare At:
-
$73.10
- You Save:
-
$11.15
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 216954217
$76.46
- Compare At:
-
$90.99
- You Save:
-
$14.53
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 216100113
$100.31
- Compare At:
-
$108.18
- You Save:
-
$7.87
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 216100118
$82.40
- Compare At:
-
$84.85
- You Save:
-
$2.45
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304411971
Fix a refrigerator that won't cool or has a clicking compressor with this start relay and overload assembly. Common failure part, moderate DIY repair.
More
$104.38
- Compare At:
-
$109.42
- You Save:
-
$5.04
Out Of Stock
Usually ships within 4 - 14 days
Gibson freezer Relay, Overload, Capacitor replacement parts are essential for keeping your appliance running smoothly and efficiently. Freezers are an indispensable part of any household, and maintaining their functionality is key. The Gibson freezer Relay, Overload, and Capacitor parts are designed to help your appliance manage power effectively. The relay helps control the compressor's operation, allowing it to start and run efficiently. The overload protects your freezer from electrical surges, and the capacitor aids in storing and distributing energy where it's needed most. By using these Gibson freezer parts, you're ensuring that your freezer remains reliable and efficient.
Opting for OEM replacement parts is always a good idea, as they guarantee quality and compatibility. OEM parts are made to fit and function exactly like the originals, providing peace of mind that your Gibson freezer will operate as intended. These parts not only help restore the freezer's functionality but also extend its lifespan, saving you from costly repairs or replacements.
The quality and availability of Gibson freezer Relay, Overload, Capacitor parts ensure that you can keep your appliance running smoothly. Rest assured, with the right parts, your freezer will continue to serve you well for years to come.
More