Hardwick Range / Cooktop / Oven Heating Element
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY04000066
The Range Element Kit is an OEM part for Whirlpool ranges. This kit typically includes elements used for heating the oven or stovetop, ensuring efficient and even cooking or baking. The element measures 16" wide and 16" from the mounting plate to the other side. The terminal depth is 3", and the total element length is 19". It is rated at 2100 watts and 240 Volts.
Over time, heating elements can become worn out or damaged due to repeated use, exposure to high temperatures, or electrical issues. A malfunctioning element can lead to uneven cooking, longer cooking times, or the range not heating up at all.
Symptoms of a bad Range Element include:
- The element not heating up
- Uneven cooking or baking results
- Visible damage such as burns or breaks in the element
- Sparks or electrical issues when the element is turned on
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Oven not heating evenly
-
Little to no heat when baking
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
Oven heating element burned out. Andrew M. • Odessa , MO • February 06, 2021
The top part of our double wall oven quit working a couple years ago. We asked an appliance repair guy if he could find a replacement heating element and after a few days, he told us he couldn't. We switched to using the bottom and recently I started looking to purchase a new oven.
On a whim, I decided to check the Interwebs and found several sites claiming to have the part that the appliance repair guy said didn't exist. I ordered from Appliance Parts Pros and a few days later the...
Read more
More
$46.95
- Compare At:
-
$66.32
- You Save:
-
$19.37
Genuine Whirlpool part
By: Whirlpool
Part Number: WP660532
The 6 Inch Small Surface Element is an OEM part for Whirlpool electric ranges and cooktops. This component is essential for providing consistent, controlled heat to cookware on the stovetop.
Symptoms of a bad 6 Inch Small Surface Element include:
- Lack of heat production, with the element failing to warm up at all.
- Inconsistent heating, where the element may fluctuate in temperature or only partially heat.
- Visible damage such as blistering, bubbling, or cracks on the element's surface.
- A tripped circuit breaker when the element is turned on, indicating a short.
Causes of a bad surface element can include prolonged use leading to element burnout, electrical faults such as faulty wiring or internal failures, and physical damage from impact or heavy cookware being dropped on the element.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
8-inch element is part number WP660533.
Do-It-Yourself Stories from Customers like You
Our range needed 4 new range top elements due to wear Dale D. • Orlando , FL • December 05, 2014
Personally I have experience working with electricity and knowing if I bought the part required this would be an easy fix. I got my model number and contacted Appliance Parts Pros and placed my order for the new elements, terminal blocks, and for appearance purposes 4 new Drip Pans. Excellent service and quick shipping. I ordered my parts on Sunday and received them on Tuesday.
This was a simple repair that only required a screwdriver to remove the old terminal block from the range hood, wire...
Read more
More
$28.25
- Compare At:
-
$44.73
- You Save:
-
$16.48
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74003019
This OEM Replacement Part is a bake element designed for Whirlpool electric ovens. It measures approximately 19 1/4 inches wide and 15 1/2 inches deep. The element extends about 3 inches past the bracket to the terminals. The element, positioned at the bottom of the oven cavity, supplies heat for baking. It features male spade connectors with push-on wire terminals. If your oven experiences uneven heating, lack of heat, or minimal heat during baking, replacing this part may be necessary.
Ensure the range is unplugged or the house circuit breaker for the range is shut off before installation. The element provides 2100 watts on 208 volts and 2800 watts on 240 volts. Removal involves unscrewing Phillips screws above the element brackets and detaching the wire harness without losing wires. Inspecting the wire terminals for any signs of arcing or burning during removal is recommended.
This part fixes the following symptoms
-
Little to no heat when baking
-
Oven not heating evenly
-
Oven is too hot
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Oven bake element stopped working Belle K. • Anaconda , MT • August 29, 2014
I'm a 66 year old woman (on a fixed income) and I'd never before repaired an oven bake element . My stove is 20 years old but I still found it was much more affordable to change the bake element rather than buying a new stove. I called the number on the website and talked to a very informative woman. She answered all the questions I had about my stove. She told me about the repair video on the website which had step-by-step instructions. I ordered a new element - received it within 4 days....
Read more
More
$48.95
- Compare At:
-
$58.74
- You Save:
-
$9.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY04100166
The Surface Element is an OEM part for Whirlpool ranges and cooktops. This component is essential for providing the heat necessary for cooking on the stove, converting electrical energy into the heat needed to cook food.
Over time, surface elements can become faulty due to wear and tear, overheating, or electrical issues. Replacing a bad surface element ensures the appliance continues to perform effectively and safely.
Symptoms of a bad surface element include:
- The element not heating up or only heating intermittently
- Visible damage such as burns or breaks in the element
- Uneven cooking due to inconsistent heat distribution
- The element not responding to temperature adjustments
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Note: For the 6-inch element, order WPY04100165.
Do-It-Yourself Stories from Customers like You
The coils and drip pans were really worn out coils were falling apart and the pans were chipped and stained Janice J. • Terrell , TX • August 14, 2015
Installed the new pans and replaced the coils. My Jennaire looks like new. Only took minutes and made such a difference.
Read more
More
$39.95
- Compare At:
-
$47.54
- You Save:
-
$7.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY04100165
The Surface Element is an OEM part for Whirlpool ranges. This part provides heat to the cooking surface, allowing for the preparation of food.
Common causes of a bad surface element include electrical faults, physical damage from heavy cookware, or degradation from constant heating and cooling cycles.
Symptoms of a bad surface element include:
- Inconsistent or uneven heating
- The element not heating up at all
- Visible damage such as burns or breaks in the coil
- Sparking or unusual noises when the element is turned on
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The burners on my drop in stove would not work the connections and the surface elements were in bad shape Luise C. • Worth , MO • November 23, 2014
I lucked out my nephew was here to deer hunt and he helped me. I do believe I could have done it on my own but was more confident with his help. I will say the videos did help.
Read more
More
$54.95
- Compare At:
-
$65.94
- You Save:
-
$10.99
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY04000048
The Broil Element is an OEM part for Whirlpool ranges. This part provides the intense, direct heat necessary for broiling. This part is located at the top of the oven cavity and is essential for achieving high temperatures needed for tasks like browning and searing.
Causes of a bad broil element can include electrical issues such as short circuits, damage from spills or food debris, and general wear and tear from repeated use.
Symptoms of a bad Broil Element include:
- The oven not reaching broil temperatures
- Inconsistent or uneven broiling
- The element not glowing red when in use
- Visible signs of damage or burning on the element
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
This part fixes the following symptoms
-
Little to no heat when broiling
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
Broil element was burned out Aybars G. • Ridgewood , NJ • June 17, 2019
Turned off breaker to oven, took pictures of existing broil, supporting bracket and shield attached to oven, removed screws holding element, support piece and shield, removed bracket and shield, pulled out the element, took another close-up picture of the wires connected to element, removed wires, connected new element, turned breaker on to see if connection is correct, turned it off, installed element, shield and support bracket (in this order). Turned breaker on.
Hardest part was loosening...
Read more
More
$98.54
- Compare At:
-
$117.26
- You Save:
-
$18.72
Genuine Whirlpool part
By: Whirlpool
Part Number: W10823707
Restore reliable heat to your electric range or cooktop with this surface heating element. Replacing a failed top-burner element brings back consistent, even heating so pots and pans heat up properly at your chosen setting.
- Supplies electric heat to a cooktop burner zone when turned on
- Common fix for a burner that won't heat or only partially glows/heats
- Helps address uneven or slow heating on the affected element
- Replace if the element shows visible breaks, blisters, or has shorted
What's included: 1 surface heating element Install notes:
- Disconnect power at the breaker and allow the cooktop to cool completely before service
- Access varies by model; support and protect glass tops when lifting/removing
- Photograph wiring; transfer any original brackets, insulators, or limiter/thermostat if present
- Ensure clean, tight terminal connections; fully reassemble before restoring power
Do-It-Yourself Stories from Customers like You
2 out of four electric burners of my stove quit working Jacek S. • Concord , CA • October 22, 2015
Little procrastination paid off. With only 50% capability I knew it is time to call the appliancepartspros. They shipped me parts within 3 days. It was practical to fix both at the time. All I needed was to disconnect power at range breaker box, grab a screwdriver to lift top open, a 16 inch or so piece of old 2×4 wood to keep the top top of stove lifted, so I could access heating elements from underneath. Then I took my black sharpie And marked location of mounting screws and...
Read more
More
$133.26
- Compare At:
-
$158.58
- You Save:
-
$25.32
Genuine Whirlpool part
By: Whirlpool
Part Number: W10823704
This surface heating element powers one of your range's top burners, restoring steady, responsive heat for everyday cooking. Replace a failed element to bring your cooktop back to consistent performance when boiling, simmering, or sautéing.
- Provides heat to the selected surface burner when the control is turned on
- Works with the burner switch to reach and maintain set temperatures
- Common symptoms of failure: burner won't heat, heats unevenly or intermittently, or shows visible damage/hot spots
- Helps resolve long heat-up times and inconsistent cooking results
What's included: 1 surface heating element. Install notes:
- Disconnect power at the breaker and allow the cooktop to cool completely before servicing.
- Access and mounting vary by model; note wire locations and transfer any brackets/clips from the original element.
- Inspect terminals and connectors; replace any heat-damaged wiring or receptacles before reconnecting.
- Handle by the frame and avoid stressing the element; ensure secure electrical connections before testing.
Do-It-Yourself Stories from Customers like You
The right rear smaller surface heating element on our 6898vvd magic chef flat top range was completely dead Eugene N. • Riverside , CA • July 16, 2025
The instructions that came with the replacement smaller surface heating element provided no help about how to open the top of the range, so I checked the internet. I found several videos on replacement of surface elements in flat top ranges, but none for our particular range, so I Google-searched a simple question, “How to open the top of a 6898VVD Magic Chef range”. The AI Overview answer had several points, most of them not useful, except for the last one: “Hidden Clips: There might be...
Read more
More
$129.56
- Compare At:
-
$162.63
- You Save:
-
$33.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY04000041
This bake element supplies the primary heat from the bottom of the oven during the Bake cycle. Replace it to restore proper preheating and even results when the original is burned out, damaged, or no longer heating. What it does:
- Provides radiant heat for baking and preheating from the lower oven position
- Helps the oven reach and maintain the set temperature for consistent cooking
- Common symptoms: no heat in Bake, very slow preheating, uneven baking, or a visible blister/crack in the element
- Restores normal oven operation when the existing element has failed
What's included:
Install notes:
- Disconnect power at the breaker or unplug the appliance before servicing
- Remove oven racks; take out the element's mounting screws and gently pull the element forward
- Support and disconnect the two wire terminals; prevent wires from slipping back into the insulation
- Attach wires to the new element, secure with existing hardware, restore power, and test
This part fixes the following symptoms
-
Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You
Baking element went out Vincent B. • Yukon , OK • February 28, 2016
It took 10 minutes and a screwdriver, remember to turn off power to the oven at the fuse box. By the way, I ordered the part at 1:30pm and received it at 12:30pm the next day using normal shipping, not bad.
Read more
More
$72.53
- Compare At:
-
$86.31
- You Save:
-
$13.78
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74010761
This bake element supplies the lower-oven heat your range or wall oven needs for baking and roasting. Replace it when the oven won't heat properly in Bake or the element shows visible damage.
- Provides primary heat from the bottom of the oven during Bake cycles
- Helps maintain even, consistent oven temperature
- Common failure symptoms: no heat in Bake, slow preheat, uneven or undercooked results
- Visual signs of failure: element is blistered, cracked, or broken
What's included: 1 bake element assembly Install notes:
- Disconnect power at the breaker and allow the oven to cool completely
- Access from inside the oven; remove mounting screws, pull the element forward, and move the two wire leads to the new element one at a time
- Support wires so they don't slip behind the liner; ensure snug terminal connections
- Restore power and run a short Bake cycle to verify operation
This part fixes the following symptoms
-
Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You
Baking element burned out Billy C. • Dixon , KY • November 01, 2015
The delivery of the element was superfast, less than 24 hrs. Unplug the Stove from the receptical! Took a phippips screwdriver and took out the 2 screws holding it, and tilted it upwards a bit and pulled the element out about 3 inches an unhooked the wires.
Hooked the wires up to the new element and pushed it back into the holes and put the 2 screws back in and turned the stove on and that was all there was to that.
Read more
More
$77.71
- Compare At:
-
$91.70
- You Save:
-
$13.99
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10259868
This 6-inch radiant surface element is the heating source for a small burner beneath a glass-ceramic cooktop. Replacing a failed element restores reliable, controllable heat to that cooking zone. What it does:
- Heats the 6-inch cooking zone under the glass top when the control is turned on
- Cycles to help maintain the selected temperature during cooking
- Common symptoms of failure: small burner won't heat, heats unevenly or intermittently, or shows visible burn spots/damage
What's included:
- 1 six-inch radiant surface element
Install notes:
- Disconnect power at the breaker and allow the cooktop to cool completely
- Lift the glass top or remove the cooktop to access the elements; support the glass to avoid stress or cracks
- Note wire positions and transfer connections to the new element one at a time
- Ensure the element sits flat in its mounting brackets before reassembly and testing
Size note: Designed for 6-inch burner locations on glass-ceramic electric cooktops/ranges.
Do-It-Yourself Stories from Customers like You
Needed new element (not received yet) and new drip bowls Diane C. • Springhill , LA • August 17, 2015
Not really a repair, just needed to update some parts that were worn out. Drip pans were perfect and I am so glad to have found them on this location.
Read more
More
$85.95
- Compare At:
-
$102.28
- You Save:
-
$16.33
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3191454
2100W. Size: 8 inch. Location: Right front.
Do-It-Yourself Stories from Customers like You
Old elements were not working like they should Kenneth K. • Manitowoc , WI • May 13, 2018
Ordered new ones
Read more
More
$91.32
- Compare At:
-
$107.76
- You Save:
-
$16.44
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY04000035
This 8-inch surface burner element delivers heat on an electric cooktop or range. Replacing a worn or open element restores even heating on the burner zone and reliable response to temperature settings.
- Heats the 8-inch cooking zone when the surface control is turned on
- Helps maintain consistent pan temperature for boiling, simmering, and frying
- Common symptoms: burner won't heat, heats unevenly or intermittently, visible blistering/breaks in the coil, or scorch marks at the terminals
- Replacing a damaged element can prevent further damage to the receptacle/terminal block
What's included: One 8-inch surface element. Install notes:
- Disconnect power at the breaker and allow the unit to cool completely
- Handle the element by the bracket; avoid bending the coil
- For plug-in setups, pull the old element straight out and firmly seat the new one; for wired connections, move wires one at a time to the matching terminals and secure properly
- Inspect the receptacle/terminal block and wiring; replace if burnt or loose before restoring power
Do-It-Yourself Stories from Customers like You
My large electric burner went out on my range i ordered the part which came practically the next day Angela G. • Victoria , TX • January 10, 2015
I unplugged the old, plugged in the new, and started cooking.
Read more
More
$74.59
- Compare At:
-
$88.02
- You Save:
-
$13.43
Genuine Whirlpool part
By: Whirlpool
Part Number: WP12001560
This 8-inch surface element kit restores reliable heat on your electric range or cooktop. Replace a failed burner so pots heat evenly and settings respond as expected across your 8-inch cooking zone.
- Heats the 8-inch surface burner for everyday boiling, simmering, and frying
- Replaces a burned-out or damaged element to restore consistent performance
- Helps eliminate weak, uneven, or intermittent heating
- Common symptoms: surface burner won't heat, heats inconsistently, or shows obvious damage
What's included: One 8-inch surface element Install notes:
- Disconnect power at the breaker or unplug the appliance before servicing; allow all components to cool completely
- Note wire/terminal positions and transfer any mounting parts from the old element if required
- Ensure terminals are fully seated and the element is properly supported/seated before use
- After installation, test on low and high settings to confirm proper operation
Do-It-Yourself Stories from Customers like You
Stove top element broke and which then caused the light that says the element is on to stay on even when it was off Catherine P. • Eagle , NE • September 05, 2016
I got online to research what the problem could be and came to realize the infinite switch had probably shorted out when the element broke. While looking for the part I came across an appliancepartspro video that showed me exactly how to replace the switch. I ordered the switch from applicancepartspros.com, which arrived in two days! I watched the video again while installing the part and had it done in less than 30 minutes. The hardest part was lining up the end caps as I put the stove...
Read more
More
$94.61
- Compare At:
-
$113.53
- You Save:
-
$18.92
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3147131
This surface element supplies heat to an electric range or cooktop burner. When it fails, the burner may not heat or may heat inconsistently. Replacing the element restores steady, reliable cooking performance.
- Converts electrical energy into heat for the cooking zone
- Works with the surface control (infinite switch) to regulate temperature
- Common symptoms: burner won't heat, intermittent or uneven heating, visible breaks/blistering, burnt/melted terminals
- A failed element will not glow or reach set temperature when energized
What's included: 1 surface heating element Install notes:
- Disconnect power at the breaker before servicing and allow the cooktop to cool completely
- If your model uses a plug-in coil style: remove the drip pan, pull the element straight out of the receptacle, and inspect/replace a heat-damaged receptacle as needed
- If your model uses an under-glass radiant style: lift the cooktop, transfer any clips/limiters from the old element, and route wires exactly as original
- After reassembly, test the burner at a low setting to ensure proper operation
Do-It-Yourself Stories from Customers like You
The 6" burner on my g e stove stopped working there is no listing for a burner for this model stove but a 6" burner for another brand of stove fit perfectly Kenneth M. • Meridian , MS • July 19, 2015
Replaced 6" burner.
Read more
More
$118.49
- Compare At:
-
$141.00
- You Save:
-
$22.51
Genuine Whirlpool part
By: Whirlpool
Part Number: WP7406P043-60
Bottom-mounted bake element that provides the primary heat for baking. Replace when burned out or damaged to restore proper preheat and even baking.
- Supplies radiant heat from the bottom of the oven during Bake cycles
- Helps the oven reach and maintain the set temperature
- Common failure signs: no heat in bake, slow preheat, uneven results, or visible cracks/blistering on the element
- A shorted element may trip the household circuit breaker when Bake is selected
What's included: 1 bake element Install notes:
- Disconnect power at the breaker or unplug; allow the oven to cool completely
- Remove racks; take out the element's mounting screws, gently pull it forward, and move the two wires to the new element one at a time using insulated pliers
- Don't let wires slip back through the rear panel; inspect terminals for heat damage, reassemble, restore power, and test preheat
Do-It-Yourself Stories from Customers like You
Burned out oven element Cheryl L. • Espanola , NM • November 25, 2014
Unscrewed the back piece, but it had wires behind the oven wall, so had to get our electrician to finish it up. Had ordered the new element from you - it was easy, informative and delivered quickly!
Read more
More
$81.64
- Compare At:
-
$97.15
- You Save:
-
$15.51