Huskee / Husky Lawn Mower Parts

This genuine OEM Part is a choke temperature control rod for lawnmowers. The choke temperature control is the metal piece that regulates the choke temperature allowing for it to function properly within a lawnmower. If the choke function is no longer working efficiently, it might be time to replace the choke temperature control. Luckily, replacing this part is a simple repair.Before beginning, make sure the engine is cool to avoid getting burned. Locate the old choke temperature control rod and remove the screws to the mounting assembly that hold the rod in place. Once removed, lift the old choke temperature control out and away from the mower and set it to the side. Replace with the new control rod and secure the mounting screws. Start up the mower to see if the choke function is working properly. If it does, the installation was a success. This replacement part is sold individually and is compatible with MTD brand lawnmowers.

This choke temperature control gasket is an authentic OEM replacement part sourced directly from the manufacturer for use small engines that utilize a choke. The temperature control gasket helps to create a seal inside the choke that prevents air from seeping in or out of the choke. If the gasket is worn or damaged, air and contaminants could infiltrate the choke and cause the choke to fail. The choke temperature control gasket should be inspected and replaced if it is damaged. The choke uses a mixture of fuel and air to start the engine combustion process. If the choke temperature control gasket is not fully functioning, too much air could get in, and the ratio would not be optimal for the ignition process. If the engine is rough starting or starts and dies quickly, the choke's gaskets should be inspected and replaced as needed. Wear gloves when working on the choke and ensure that the spark plug is removed to prevent accidents.This choke temperature control gasket is sold as an individual part. It is designed for use in small engines that utilize a choke manufactured by MTD, Yard Machines, Yard Man, Cub Cadet, Husky, Troy-Bilt.

This is a replacement pre-filter. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a worn or defective pre-filter on a variety of different models of power equipment.Pre-filters help to keep larger particles of debris from entering the filter itself, preventing clogging and damage. The pre-filter will need to be cleaned and changed with regularity to ensure proper equipment function. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this pre-filter, refer to the appropriate owner's manual and included diagrams.As an authentic replacement part, this pre-filter is suitable for use on several different lawnmower models and small engine power equipment manufactured by MTD, Troy-Bilt, Husky, and Yard Machines. This is a genuine part made of high-quality, durable foam material and is sold individually.

This replacement part is an air filter, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This air filter is typically found in riding lawn mowers and is responsible for filtering out air from the engine. This air filter is able to catch dust and debris so that the engine of the lawn mower is kept in proper working order. A new air filter might be needed if the current one is full of debris or is visibly clogged. It is recommended that the air filter be replaced once per season or after about 300 hours of use. If the user notices that the air filter is dusty, it is recommended it be cleaned. This air filter is a genuine OEM replacement part sourced directly from the manufacturer and is sold individually. Be sure the engine is powered down before replacing this part.

This is an air filter that can be used with lawn and garden equipment. The air filter plays an important role in mowers, trimmers, and more. It prevents airborne contaminants like dirt, dust, leaves, and other debris from getting pulled into the engine. Air filters should be checked regularly and replaced when they become dirty, or if they are punctured or otherwise damaged. This is a quick repair that should take only a few minutes to complete.The air filter will work with lawn mowers and trimmers from MTD, Yard-Man, Troy-Bilt, Yard Machines, and Cub Cadet. The piece is sold individually. It is a genuine OEM replacement part that has been sourced from the manufacturer.

The height adjustment assembly is a replacement part that is designed for use in select walk-behind lawn mowers. The adjustment assembly includes nine total height adjustments and installs on the front wheel of the unit to allow the user to adjust the wheel height and cutting height before each use. The metal height adjustment assembly is exposed to constant impacts and repetitive motion, which can lead to damage or wear. If the height adjustment fails, the mower may be inoperable until the part is replaced. This genuine OEM part will provide the appropriate replacement for select models from MTD, as well as those from Troy-Bilt, Bolens, Yard Machines, Yard Man, Husky, and Cub Cadet. It is sold as an individual assembly and the hardware required will be sold separately. This is an identical replacement for the right side of the mower. It is important to wear gloves when working on the mower deck and allow the unit to cool completely for safety. The height adjuster will take a wrench or socket set and screwdrivers to install.

This replacement part is a height adjuster assembly, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Height adjuster assemblies allow the user to adjust the height of the blades on a mower to change the length grass will be cut to. This device is essential so that the user can customize the job during each lawn cutting. A new height adjuster assembly might be needed if the user notices that the current one is no longer working. If the user is unable to adjust the height of the blades, it might be time to replace the height adjuster. Be sure to wear working gloves during this repair as this part is situated close to the blades of the lawn mower and can be dangerous if not properly protected. This height adjuster is sold individually. Note that it is also a genuine OEM replacement part and is sourced directly from the manufacturer.

This replacement part is an adjuster assembly intended for use in lawn mowers. This adjuster assembly allows the user to control the height of the mower's blades, which will adjust the depth of a cut.An adjuster assembly may become stripped or worn down over time, necessitating replacement.This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This replacement part is a handle bracket assembly. This is a genuine replacement part made by MTD. Brackets are used to connect two pieces together and ensure that they are secure during use. A new handle bracket assembly might be needed if the current one is unable to properly stay attached in any way. This can be due to damage over time and should be replaced if this is the case. The bracket assembly might have become stripped due to normal wear and tear. Be sure to refer to the proper use guide for more information on how to install this part efficiently and correctly. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.