Husqvarna Lawn Mower Parts

If your mower blade wobbles or won't spin properly, the blade adapter may be cracked or worn. This part secures the blade to the drive shaft.

This is a safety seat switch that detects whether the operator is seated on the lawn tractor. It works as part of the interlock system, shutting down the engine or preventing the blades from engaging when no one is in the seat. Replace this switch if the engine stalls when you shift your weight, fails to start, or the mower deck disengages unexpectedly.

Front wheel adjuster kit for walk-behind mowers. Controls cutting height adjustment mechanism. Replace if adjuster is broken, cracked, or won't hold position.

This is a steering or deck lift link assembly used in the front suspension area of a riding mower or lawn tractor. It connects the deck lift mechanism to the frame, allowing you to raise and lower the mower deck to adjust cutting height. Replace this link assembly if it is bent, corroded, or worn out, which can cause difficulty adjusting the deck height or uneven cutting.

This replacement blade adapter is an authentic OEM part for a riding lawn mower. The blade adapter is located in the lower deck of a lawn mower and connects the blade to the motor shaft. As the shaft rotates, it spins the adapter, causing the blade to rotate and cut grass. The adapter locks into place so that it doesn't come flying off during operation. The adapter is made of durable steel so that it is not easily damaged, but if the blade strikes something quite hard, it can break the adapter, causing the blade to spin unevenly, or even bending the motor shaft. If left unattended to, it can be dangerous for the operator, as the blade could potentially break off from the mower. Replacing the adapter can be a little finicky, as they are generally quite tightly locked into place. There are special adapter keys that make it easier to remove, but the same effect can be achieved with a screwdriver or a pair of pliers. This part is compatible with riding lawn mowers made by Husqvarna and Craftsman. It comes sourced from the original manufacturer and ships individually.

This is a lawn mower blade adapter that will work with a range of mowers. The blade adapter is a part of the mower deck that helps to attach the blade. If the blade adapter has gone bad or is damaged, it can cause the blade to vibrate. If the adapter is severely damaged, the blade may not stay on the mower. It has the potential to be very dangerous. Replace the adapter right away if it is not working properly.The blade adapter is made from durable metal, and it should last a long time. However, there is a chance it could become damaged while mowing the lawn or due to corrosion. It is an easy repair to make, and owners can replace the adapter on their own in less than 10 to 15 minutes in most cases.The blade adaptor will work with select mower models from Craftsman and Husqvarna. The part is sold individually, and it is a genuine OEM replacement part sourced from the manufacturer.

Mower won't move forward or wheels don't turn? This transmission drives the wheels by engaging the drive belt when you pull the control bar.

Rear deck baffle for walk-behind mowers. Attaches to the rear of the mower deck to direct debris flow and water during cleaning. Replace if cracked or broken.

Muffler exhaust tube for riding mower tractors. Replaces cracked, rusted, or damaged exhaust tubing that needs replacement due to wear or corrosion.

Drive control cable for walk-behind lawn mowers. Connects handle controls to transmission drive system. Replace if cable is frayed, stretched, or broken.

Main body chassis frame for riding lawn tractors. Replace if cracked, bent, or structurally compromised. Central frame that supports engine and components.

The starter solenoid, also called a starter relay, is a low-amperage relay that completes the high-amperage connection between the starter motor and the battery when the ignition key is turned. The starter solenoid is needed to engage the starter motor. When the ignition is turned on, the battery sends a small electrical charge to the starter solenoid. The solenoid shuts a switch, so a more significant amount of current is sent to the starter motor. The starter motor shaft starts to rotate and engage the teeth of the flywheel. The flywheel then turns the crankshaft to put the engine in motion. A bad solenoid can deny the flow of electricity to the starter motor and prevent engine startup. However, other underlying problems may also exist. The battery may be in good condition, but the engine is not cranking, or clicking and grinding noises may come from the solenoid. These are signs that the starter solenoid should be replaced. This starter solenoid is for use in riding lawn tractors and zero-turn riding mowers. It is compatible with specific models from different brands, including Ariens, Craftsman, Dixon, Husqvarna, Hyper Tough, Jonsered, Murray, Poulan Pro, Redmax, and Snapper. It is a genuine OEM replacement part sourced directly from the manufacturer and is sold individually.

Mower blades won't engage or disengage? This PTO switch controls blade engagement from your console. Direct replacement restores safe cutting control.

This replacement part is a fan. It is a genuine replacement part made by Husqvarna. This part works to keep the engine cool during use so that it does not overheat.A new fan might be needed if the user notices that the current one is not working. This can be due to normal wear and tear from years of normal use. If the user notices that the engine is becoming overheated it can be due to the fan not working properly or at all. Be sure the engine is completely powered off before attempting this repair. Refer to the owner's manual for more specific information on this replacement part.This fan is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure a proper fit and long-lasting use.

Replacement torque bracket for riding mower tractors. Mounts to the frame to stabilize engine torque. Replace if cracked, bent, or missing. Essential structural component for smooth operation.

This replacement part is a fan kit and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. Fan kits are able to keep the parts inside the machine cool to prevent overheating and ensure that the engine is running properly. A new fan kit might be needed if the user notices that the current fan is not working properly or if the engine is overheating often. This can be due to a faulty fan and the part should be replaced as soon as possible. Without a fan kit the engine might be prone to overheating more frequently. Be sure to wear work gloves as this part is often adjacent to other dangerous parts. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit and long-lasting use. This is a genuine OEM replacement part.