Husqvarna Lawn Mower Parts

This discharge chute attaches to the side of the mower deck and directs grass clippings away from the cutting area during mowing. It helps control where clippings are expelled for a cleaner cut. Replace this chute if it is cracked, broken, or missing, which can cause clippings to scatter unevenly or create a safety hazard.

Lower handle for 21-inch walk behind mowers. Replaces cracked, bent, or broken lower handle sections. Black finish. Restores comfortable control.

This pipe channels exhaust gases away from the engine on the left side of the mower. Replace it if you notice increased engine noise, visible exhaust leaks, rust holes, or if the pipe is bent or damaged.

This part is a replacement engine exhaust tube. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. If the current exhaust tube is broken or in any way damaged, this part can be used as a replacement. It is intended for use with several lawn tractor models.The exhaust tube connects to the muffler and the engine exhaust port and allows fumes to be properly expelled from the engine. The exhaust tube can become dented, damaged, or detached and thus may require replacement. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this exhaust tube, the appropriate owner's manual and equipment diagrams should be referred to. This exhaust tube is suitable for use on a variety of different lawn tractor models manufactured by Husqvarna and Poulan. It is a genuine OEM part and thus is made of high-quality, durable metal. Part sold individually

Mechanical clutch cable for riding mowers with lever-operated transmissions. Replace if cable is frayed, stretched, broken, or no longer engages smoothly.

This lawn tractor fan has 10 blades and is made from high-quality materials. The fan is used in the transmission assembly to cool the engine, ensuring that the tractor doesn't overheat. If it is not working properly, it could mean heating and performance problems for the tractor.Fans do a substantial amount of work in the tractor, and over time, they can start to wear down. One or more of the blades might crack or break, for example. Owners need to replace the fan as soon as they notice any issues. If the engine of the tractor were to become too hot, it could be damaged. The replacement will require a wrench.This replacement fan for lawn tractors will work on models from Craftsman and Husqvarna. The fan is sold individually. It is a genuine OEM replacement part that is sourced right from the manufacturer.

Fix engine overheating on your riding mower with this fan blade and pulley assembly. Circulates cooling air around the engine block. DIY install.

Replacement hex head screw for lawn tractors and riding mowers. Use to replace broken, stripped, or missing screws in various mounting locations.

This v-belt is a genuine Husqvarna part, sold individually. This v-belt can be used as a replacement part for outdoor appliances with small engines such as lawnmowers and lawn tractors. This v-belt facilitates rotation so that the small engine can be powered on. The v-belt might have to be replaced at some point within the standard lifespan of the appliance if it can no longer serve its function. This could be as a result of general wear and tear or due to a direct impact with a hard object that could permanently warp the component beyond functionality. If this occurs and the damage is visible in the form of rips, punctures, or erosion, the v-belt should be removed and replaced by this genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This v-belt is compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Craftsman.

This is the bail control arm handle for a walk-behind lawn mower. It connects to the operator presence control system and must be held against the upper handle to keep the engine or blade engaged. Replace this part if it is bent, broken, or no longer properly activates or deactivates the blade or drive system when squeezed.

This is the replacement washer head screw for a lawnmower or lawn tractor. It is black in color and is roughly 1.5 inches in length. With its hexagonal head and washer face, it is usually used as a fastener in outdoor power tools. It is self-tapping, meaning it can tap its own threads when screwed into either plastic, wood, or metal. When used with lawn tractors and lawnmowers, this screw is commonly employed for securing the mandrel housing to the mower deck. Replace the washer head screw if the old screw is damaged or missing. First, a pilot hole should be made that's slightly smaller than the diameter of this screw before driving it with a screwdriver. This is also a thread-forming type of self-tapping screw, and it does not have a pointed tip. It is compatible with specific products from major brands like Ariens, Craftsman, Husqvarna, Murray, Poulan, Ryobi, and Weed Eater. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

This is a rubber wheel ring that attaches to the wheel hub. Rubber wheel rings are also often called friction rings. The rubber wheel ring/friction ring meshes with the friction disc. This is what causes the drive wheel axle to turn. This is an integral part of the wheel movement.A new rubber wheel ring may be needed if the existing part is visibly damaged. The operator may also notice a grinding noise when the rubber wheel ring is starting to go bad. This may need to be replaced over time after normal wear and tear. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This rubber wheel ring is a genuine OEM part sourced directly from Husqvarna. It is sold individually. This rubber wheel ring is compatible with snowblowers manufactured by Husqvarna, Poulan, and Jonsered.

Replacement fuel tank cap for riding mowers and lawn tractors. Seals the fuel tank opening to prevent spills and evaporation. Replace if cracked or missing.

Drive control cable for walk-behind mowers. Connects handle controls to drive system. Replace if cable is frayed, broken, or no longer engages drive.

Replacement mounting bolt for walk-behind lawn mowers. Secures components in place. Order a new bolt if your current one is missing, damaged, or stripped.

Throttle control cable for gas line trimmers. Connects the throttle trigger to the engine carburetor. Replace if cable is frayed, kinked, or broken.