Husqvarna Lawn Mower Parts

This 16.25 inch-long blade is manufactured for use with lawn mowers, lawn tractors, zero-turn mowers, and riding mowers. It is a genuine Husqvarna part. The blade is a crucial component of the mower. It is the part that actually cuts grass. It is normal for the blade to become dull over time. They can be sharpened, but replacing will yield better results.Before replacing the blade on a mower, allow the engine to cool, empty the fuel tank, and disconnect the spark plug for safety. Wear work gloves to protect the hands. Tip the lawnmower onto its handle assembly or side. Use a socket to remove the nuts or bolts that attach the blade to the mower. Replace with the new blade and torque the nuts and bolts.This blade is a genuine OEM part sourced directly from the manufacturer. It is sold individually, and most mowers have only one cutting blade. It is manufactured to be compatible with several models made by Dixon, Husqvarna, and Jonsered.

This is an authentic OEM replacement ignition module built specifically for Husqvarna lawn appliances. An ignition module, also known as an armature-magneto, is an essential part of a combustion engine's ignition. The ignition module creates pulses of high voltage electricity that the spark plug uses to generate a charge and start the ignition. Without a functional ignition module, the spark plugs and ignition will not engage. The most common reason for an ignition module to break is if the spark plugs have gone bad or are missing from the ignition. The charge generated by an ignition module is quite high, so if the spark plugs are not in place to receive the charge, the high voltage can fry and melt the module. If the spark plugs are not receiving a spark but can carry a charge, the odds are that the ignition module has been fried and will need to be replaced. To make this repair, use a wrench set and screwdriver. Although this high-quality replacement part is designed specifically for Husqvarna appliances, it may also work with some Jonsered appliances, too. It comes sourced from the original manufacturer and does not include any additional hardware.

This fuel line kit is a part used in gasoline-powered edgers and trimmers. It delivers fuel from the gasoline tank to the carburetor where it is mixed with air that has come through the air filter. The mix flows into the combustion chamber where it is ignited to turn the driveshaft of the tool. As an added feature, this fuel line kit also has another line to feed excess fuel back into the gas tank. Extra, unneeded fuel sometimes flows into the carburetor when the engine is cold and users are trying to prime the engine. Although durable and intended to last, this fuel line is subject to weathering over the course of several years, especially when subjected to temperature extremes. A broken or fractured fuel line will leak gasoline, resulting in an extremely dangerous situation. Leaking fuel lines must be replaced immediately. This component is easily located, situated between the fuel tank and the carburetor. It is easily disconnected and replaced. When choosing a new fuel line kit, make sure to choose a part like this one, which is a genuine OEM certified part. This fuel line kit is compatible with Jonsered and Husqvarna equipment.

This handle assembly is a genuine Husqvarna part. It is an appropriate, exact replacement for a missing handle assembly or an original handle assembly that has been damaged. It is a genuine OEM sourced part sourced from the manufacturer. This part of the trimmer/edger is where the switch controlling the throttle is located. It provides the user with an exceptionally comfortable grip while using the trimmer/edger.To repair, remove the original handle and disconnect any electrical connection. Next remove the cutter shaft and throttle cable. Carefully attach the new handle, then reattach the throttle cable and wiring. Users will need a screwdriver, Torx driver, and pliers to replace this part on compatible models. This repair should take under one hour and is appropriate for people with moderate skill levels. The part does not include the throttle cable, which is sold individually.It is compatible with the Husqvarna 122C trimmer/edger, as well as the 122LD trimmer, 122LDx trimmer/edger, and 122LK trimmer, and other Husqvarna models.

Here is an authentic fuel cap assembly that is a replacement for the cap that comes on many gas-powered lawn and garden tools. The cap provides protection and security for the fuel tank opening, so no dirt or debris gets into the fuel. This fuel cap assembly features a retainer, which will keep the cap attached to the tank when refueling. The retainer ensures that the cap does not become lost or fall to the ground. Over time, there could be many issues with the current fuel cap on the machine. It might no longer provide a tight seal. It might no longer have a retainer, or it could have cracked due to age or an accident. Regardless, it is a good idea for owners to get a new fuel cap assembly to ensure the integrity of their fuel. No tools are needed for adding the new cap to the machine. This genuine OEM replacement fuel cap assembly is sold individually. The assembly will work as a replacement for more than 50 machines including edgers, string trimmers, brush cutters, and leaf blowers. It is compatible with models from Husqvarna and Craftsman.

This genuine Husqvarna replacement part is a zinc coated drive belt for use with rear wheel drive lawn mowers. It is also called a mower belt, ground drive belt, or V belt.A properly functioning drive belt is essential for the safe and reliable use of a lawn mower. The drive belt works to drive the transmission, which in turn allows the mower wheels to turn. The drive belt may become worn out or damaged due to extended use, requiring a replacement. Remember to check the drive belt periodically to spot any wear or damage. This part is an identical replacement for a drive belt that is missing, worn out, or damaged. Prior to working with this part, please refer to the original product manual for a full list of included parts and installation instructions. Additional tools may be required for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and is sold individually. Please note: original part number 532406557 is now obsolete, and manufacturer has replaced the original part number with this part.

This spring is a genuine Husqvarna part, sold individually. This spring can be used as a replacement part in a lawn mower. This part secures various internal components while allowing for some flexibility in placement. The spring in a lawn mower might have to be replaced if it can no longer secure internal components.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This spring is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

This is a genuine OEM left front wheel adjuster kit that is sourced directly from the manufacturer. It is designed for use on lawn mowers and lawn tractors. The front wheel adjuster is responsible for the cutting height of the blades. The part is moved up or down to set the height for the desired lawn length. Over time, the part may become worn and will need to be replaced. If the wheel will not turn or the cutting pattern is not level, the wheel adjuster could be the cause. If the adjuster doesn't engage, it will need to be replaced.A nut driver and screwdriver are required to remove and replace this part. Removal and replacement is a relatively simple task that takes less than half an hour. Remove the spark plug before working on the machine to prevent accidental powering. Remove the old unit and install the new one. This kit is the left side front wheel adjuster. The right side wheel adjuster is sold separately. This left front wheel adjuster kit is made of metal; it is sold as a pre-assembled individual unit. This left front wheel adjuster kit is compatible with lawn tractors and lawnmowers manufactured by Craftsman, Husqvarna, and Poulan.

This is a replacement height adjuster assembly. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a faulty or damaged height adjuster assembly on a variety of different lawnmower models. This height adjuster fits onto the right-hand side of the lawnmower's deck. This part allows the mower deck to be easily maneuvered to the desired height. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. Proper tools are required to replace this part, including a wrench. For more accurate information on how and where to install this height adjuster assembly, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this height adjuster is suitable for use on several different lawnmower models manufactured by Husqvarna. This is a genuine part made of high-quality, durable materials and is sold individually.

This part is a transaxle fan snap ring that is used on lawn tractors. The purpose of this snap ring is to keep the transaxle fan securely in place.A new transaxle fan snap ring will be needed if the original is no longer affixing the transaxle fan securely to the lawn tractor. This could be due to a crack, break, or damage in any way to the snap ring. This component may also become worn due to normal wear and tear over time. Never perform care and maintenance on outdoor power equipment that is powered on. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This transaxle fan snap ring is a genuine Husqvarna part. It is sold individually. This particular transaxle fan snap ring is compatible with lawn tractors that are manufactured by Husqvarna, Jonsered, Craftsman, Poulan, Ariens, Tuff Torq, and Dixon.

This is the replacement washer head screw for a lawnmower or lawn tractor. It is black in color and is roughly 1.5 inches in length. With its hexagonal head and washer face, it is usually used as a fastener in outdoor power tools. It is self-tapping, meaning it can tap its own threads when screwed into either plastic, wood, or metal. When used with lawn tractors and lawnmowers, this screw is commonly employed for securing the mandrel housing to the mower deck. Replace the washer head screw if the old screw is damaged or missing. First, a pilot hole should be made that's slightly smaller than the diameter of this screw before driving it with a screwdriver. This is also a thread-forming type of self-tapping screw, and it does not have a pointed tip. It is compatible with specific products from major brands like Ariens, Craftsman, Husqvarna, Murray, Poulan, Ryobi, and Weed Eater. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.