Parts for Lg LRMXC2206D/00: Ice Maker & Ice Bin Parts

Replacement mounting stud for refrigerator door handles. Installs inside the door to secure handle assembly. Needed when stud is damaged or missing.

Water funnel assembly for bottom-mount refrigerators. Directs water flow in the ice and water dispenser system. Replace if cracked or damaged.

Plastic drain tube that channels defrost water from evaporator coils to drain pan. Replace if cracked, melted, broken, or causing water leaks in freezer.

Leveling leg for refrigerators. Installs at bottom corner to elevate and stabilize the appliance. Replace if broken, compressed, or no longer secure.

Replace your broken refrigerator drawer tray assembly to restore proper alignment and support for stored items. Includes complete tray structure. Verify fit with your model number before ordering.

Replace a cracked, broken, or missing right-side refrigerator shelf. Restores safe, level storage for food containers and everyday items in your fridge.

Left-hand shelf assembly for bottom-mount refrigerators. Replaces cracked, broken, or missing shelves. Installs inside fresh food compartment.

Replace your refrigerator's mesh shelf net when torn or stretched to restore organization and prevent items from falling through. Verify fit with your model.

Note: Shelf is on the LEFT side. 

Replacement door shelf net that secures small items in your refrigerator door. Installs on door shelf to replace cracked, stretched, or missing nets.

This is a cover assembly that sits on top of the vegetable crisper drawer area in the refrigerator compartment. It acts as a shelf and humidity barrier, helping maintain proper moisture levels for fruits and vegetables stored in the crisper bins below. Replace this cover if it is cracked, warped, or no longer sits flush, which can lead to poor humidity control and wilting produce.

Replacement shelf holder for bottom-mount refrigerators. Secures and supports shelves in place. Needed when original is cracked, broken, or missing.

Supports the fresh room crisper drawer area and contains spills in your refrigerator. Replace this tray if cracked, warped, or broken to restore drawer fit.

Replaces a cracked, broken, or missing tray cover in your bottom-mount refrigerator. Restores a finished appearance and protects the tray area.

Molded plastic cover that protects the internal tray area in your refrigerator. Replaces cracked, warped, or missing covers to restore containment.

This is a decorative front panel that attaches to the deli or fresh food drawer inside the refrigerator. It serves as the visible face of the drawer and provides a handle area for opening and closing it. Replace this cover if it is cracked, warped, discolored, or if the mounting tabs have broken, causing the panel to detach from the drawer.

This is a white decorative cover that conceals the fresh air filter compartment inside the refrigerator. It snaps into place over the air filter housing, providing a clean appearance while allowing airflow through the filter. Replace this cover if it is cracked, broken, or will no longer stay securely attached to the filter housing.

Replaces a cracked, broken, or missing crisper drawer tray in your bottom-mount refrigerator. Provides stable support under vegetable drawers.

Replacement vegetable crisper drawer tray for bottom-mount refrigerators. Restores proper storage when original tray is cracked, broken, or missing.

Refrigerator lamp cover protects the interior light bulb. Replace if cracked, discolored, or broken to restore proper lighting. Verify fit with model.

Dim or uneven refrigerator lighting? This lamp cover protects and diffuses your interior light. Direct-fit replacement lens, simple installation.

Replaces a cracked, broken, or missing tray cover in your bottom-mount refrigerator. Protects tray surface and prevents spills or contamination.

Drawer rail guide assembly for bottom-mount refrigerators. Mounts inside the cabinet to support and align drawer glides. Replace if cracked or broken.

Insulating foam panel that fits inside the freezer door to maintain temperature efficiency. Replace if cracked, compressed, worn, or missing.

This insulating foam assembly fits inside the freezer door to restore core insulation and help maintain proper internal temperature. Replacing damaged or compressed door foam can reduce frost buildup and improve cooling efficiency. What it does:

• Replaces the factory foam core inside the freezer door to restore thermal insulation.
• Helps reduce frost and ice buildup by improving the door's insulation performance.
• Supports consistent freezer temperatures that can prevent food spoilage.
• Addresses symptoms such as excessive frost, long run times, or warm/freezing temperature fluctuations.

• Install with care to avoid damaging the door liner or gasket; follow OEM disassembly instructions.
• Disconnect power to the appliance before beginning service to avoid electrical hazards.

Magnetic door gasket that seals the refrigerator or freezer door to maintain cold temperatures and prevent frost buildup. Replace if door doesn't seal, frost accumulates, or gasket is torn.

Seals the refrigerator door to keep cold air in and warm air out. Replace if torn, cracked, or causing frost buildup. Confirm fit with your model number.

Replace a cracked, broken, or worn freezer door handle on your bottom-mount refrigerator. This assembly installs on the freezer door for secure grip.

This name plate is the exterior emblem that mounts to the appliance's front panel. It replaces a missing, cracked, or faded badge to restore a clean, factory look and cover the designated trim area.

• Attaches to the outer panel to display brand/series identification
• Restores a finished appearance where the original emblem sits
• Direct replacement for a lost, damaged, or worn badge
• Typical symptoms: missing emblem, loose or broken tabs, peeling, or discoloration

• Disconnect power before servicing the appliance
• Carefully remove the old emblem; release any tabs from behind or peel away remaining adhesive
• Clean and dry the mounting surface; remove all residue for best fit
• Align with the recess/holes and press evenly until fully seated

Molded insulation insert that fits inside refrigerator doors to restore thermal barrier and reduce condensation. Replace when foam is compressed or damaged.

Seals the refrigerator door to prevent cold air leaks, frost buildup, and temperature fluctuations. Replace if torn, cracked, or no longer sealing tightly.

The Refrigerator Flipper Assembly is an OEM part for LG refrigerators. This assists in the smooth opening and closing of the refrigerator door. It ensures an airtight seal when the door is closed, preventing cool air from escaping and maintaining the refrigerator's internal temperature. 

Causes of a malfunctioning Refrigerator Flipper Assembly can range from physical damage, such as cracks or breakage, to wear and tear from regular use.

Symptoms of a bad Refrigerator Flipper Assembly include:

• Difficulty in opening or closing the refrigerator door
• A noticeable gap when the door is supposed to be sealed shut
• Increased energy consumption as the refrigerator works harder to maintain its temperature
• Spoilage of food items quicker than expected due to poor temperature regulation

This OEM LG part is also compatible with some Kenmore models.

Drawer slide guide rail for bottom-mount refrigerators. Mounts to the cabinet interior to support and align drawer movement. Replace if cracked or broken.

Replacement door basket for bottom-mount refrigerators. Restores door storage for bottles, jars, and containers. Needed when original is cracked or broken.

Clear plastic storage basket that mounts inside your refrigerator door. Holds condiments, spreads, and small items. Replace if cracked, broken, or missing.

Replace a cracked or broken door bin to restore secure storage. Mounts to the refrigerator door for organizing bottles, jars, and condiments.

Door stopper assembly cushions and limits refrigerator door travel. Replaces cracked, broken, or worn stoppers causing misalignment or door slamming.

Door stopper assembly for bottom-mount refrigerators. Installs on door to limit opening angle and prevent damage. Replace if cracked, broken, or missing.

Fix clicking doors or misaligned refrigerator doors with a new hinge cam. Restores smooth open/close action and proper door alignment. DIY-friendly repair.

Hinge assembly for refrigerator doors. Installs at door pivot point to support door weight and enable smooth opening/closing. Replace if cracked or worn.

Plastic door stop that limits refrigerator door swing range. Replaces broken, cracked, or missing stoppers causing doors to swing too wide or close improperly.

Replace a cracked, broken, or worn refrigerator door handle with this assembly. Mounts in the original location for a secure grip and finished look.

Slide rail that guides and supports refrigerator drawers for smooth opening and closing. Replace if worn, bent, cracked, or causing noisy operation.

Restores smooth drawer operation in your refrigerator. Replace when drawers stick, sag, or don't glide properly. Verify fit with your model number.

Ice maker grinding or not ejecting cubes? This gear drives the ejector blades to push ice from the tray into the bin. Restores harvest cycles quickly.

This Supporter Cover is a replacement plastic trim piece that helps protect and secure TV internal components and rear housing. It restores proper fit and finish to the back of the TV for safe, stable operation. What it does:

• Covers and protects internal electronics at the rear of the TV from dust and incidental contact
• Helps hold adjacent housing pieces and panels in correct alignment
• Replaces broken, cracked or missing rear trim that causes loose or rattling panels
• Restores factory appearance where the original cover is damaged or lost

• One supporter cover

• Disconnect power and remove all cables before starting any repair
• Handle the cover gently to avoid snapping tabs; use proper trim tools if needed
• Remove required screws or clips from the rear housing to access and replace the cover

Replacement ring for your refrigerator. Installs on internal components to secure or seal parts. Order a new ring if yours is cracked or missing.

The Spanner Wrench is an OEM replacement part for LG refrigerators. This tool allows you to adjust the door hinges to ensure the doors are level and aligned properly. A well-aligned door is crucial for maintaining the internal temperature and efficiency of the refrigerator, preventing energy loss and ensuring food is stored under optimal conditions.

Symptoms that you might need to adjust the door hinges and potentially need this wrench include:

• Doors not closing properly or sealing tightly
• Visible gaps between the door and the main body of the refrigerator
• The refrigerator tilting or not sitting level

This spanner wrench is also compatible with some Sears/Kenmore refrigerators. 

Secures and pivots your refrigerator door at the top for proper alignment and smooth operation. Replace if door sags or seals poorly. Verify fit.

Replacement refrigerator door hinge that restores smooth pivoting and proper door alignment, helping the door open and close reliably and maintain an airtight seal to preserve cooling performance. What it does:

• Supports the refrigerator door and allows it to pivot smoothly.
• Replaces worn, bent, or damaged hinges that cause door sag or misalignment.
• Helps reduce noisy or grinding door operation when the hinge is failing.
• Promotes an even door seal to help maintain internal temperature consistency.

• Unplug the appliance and remove food from nearby shelves before starting work.
• Support the door while removing hinge fasteners to prevent dropping or damage.
• Reinstall using the original hardware; align the door and tighten fasteners securely but avoid overtightening.

Replaces damaged duct vent cap assembly on your refrigerator. Install when cap is cracked, broken, or missing to restore proper airflow. Verify fit with your model number before ordering.

Lever spring for bottom-mount refrigerators. Provides tension for internal lever mechanisms. Replace if broken, stretched, or missing to restore proper fit.

If your refrigerator lever won't return to position or feels loose, this lever return spring restores proper tension for smooth operation. Direct-fit part.

Connector link between refrigerator door and cabinet. Replace if original is broken, cracked, or worn. Essential for smooth door operation and alignment.

Fix a non-responsive or broken dispenser button with this push-style lever. Restores tactile feedback and control input. Simple snap-in replacement.

Fix a refrigerator not cooling or freezing over with a new evaporator coil assembly. This part circulates refrigerant to cool your fridge compartments.

Refrigerator won't cool or compressor won't start? This overload protector prevents compressor damage from overheating or power surges. Easy DIY fix.

Fix incorrect refrigerator temperatures with this thermistor assembly. Senses temperature and signals the control board for proper cooling operation.

Rattling or loose parts in your refrigerator? This retaining pin secures moving components and keeps them aligned for smooth, quiet operation.

Support roller that mounts to the refrigerator base, allowing the unit to roll for cleaning or service. Replace if worn, broken, or causing uneven positioning.

Fixes uneven cooling and scraping noises by directing airflow from the fan. This guide restores proper air circulation throughout your refrigerator.

The Fan Motor Assembly is an OEM part for LG refrigerators. It is responsible for circulating air throughout the refrigerator and freezer compartments to maintain consistent temperatures. By ensuring proper airflow, the fan motor helps to keep your food fresh and evenly cooled.

Over time, fan motors can wear out or become damaged due to factors such as dust buildup, electrical issues, or general wear and tear from continuous use. A faulty fan motor can lead to uneven cooling, increased energy consumption, and potential spoilage of food.

Symptoms of a bad fan motor include:

• Unusual noises coming from the refrigerator
• Inconsistent temperatures in the fridge or freezer
• The refrigerator running constantly or cycling on and off frequently
• Frost buildup in the freezer section

This OEM LG part is also compatible with Sears/Kenmore.

Fix a refrigerator not cooling properly with this compressor sealing pipe. Essential sealed system component for restoring proper refrigeration.

Drain tray assembly that collects condensation beneath your refrigerator. Replace if cracked, broken, or missing to prevent water leakage issues.

Vibration-isolating grommet that mounts between the compressor and chassis. Replace if cracked, worn, or missing to restore proper cushioning.

Front cover panel for your refrigerator door. Snaps into place to restore appearance and protect controls. Replace if cracked, broken, or missing clips.

Rear machinery compartment cover assembly for bottom-mount refrigerators. Replaces cracked, broken, or missing covers that protect compressor components.

This is a small retainer clip that secures the compressor in place at the base of the refrigerator. It helps prevent the compressor from shifting or vibrating excessively during operation. Replace this clip if your refrigerator produces unusual rattling or vibrating noises from the back, or if the compressor appears loose or has shifted from its mounting position.

This restrainer is a small retaining clip that helps secure moving or removable components in place, reducing rattles and keeping parts aligned for reliable operation. It's a simple replacement for worn or broken clips. What it does:

• Holds a cover, panel, or door-related component in proper position to prevent shifting
• Reduces noise caused by loose or vibrating parts
• Restores original fit where a broken or missing clip allows movement
• Simple mechanical function — no electrical connections or calibration

• One restrainer

• Disconnect power (and water if applicable) before beginning repairs
• Inspect surrounding mounting points for damage; replace any broken tabs or fasteners
• Typically installs with basic hand tools; align clip and press or snap into place until secure

This noise damper reduces vibration and rattling sounds from refrigerant lines in your refrigerator. It cushions the copper tubing against the cabinet to prevent metal-on-metal contact that creates annoying noises. Install this damper if your refrigerator makes clicking, rattling, or vibrating sounds, especially when the compressor cycles on and off.

This holder is a small mounting bracket used to secure internal components in place, helping keep parts aligned and stable for reliable operation. It provides a direct, OEM-compatible replacement to restore proper fit and function. What it does

• Secures and supports nearby components to prevent shifting or vibration.
• Restores proper alignment where a worn or broken holder causes rattling or loose parts.
• Helps maintain normal operation by keeping assemblies seated correctly.
• Works behind panels or inside assemblies where a dedicated bracket is required.

• One holder/mounting bracket as shown.

• Installation generally requires removing the panel or access cover where the holder is located.
• Use proper fasteners shown in your appliance; replace any damaged screws or clips as needed.
• Disconnect power before servicing electrical appliances to reduce shock risk.

Fix uneven cooling or warm spots in your refrigerator with a new evaporator fan blade. This part circulates cold air throughout the unit for consistent temps.

This grille assembly replaces a damaged or worn fan cover to protect the appliance's internal fan and help direct airflow. Restores a secure fan opening and prevents debris or contacts that can impair fan performance. What it does:

• Protects the fan motor and blades from foreign objects, pets, and accidental contact
• Helps maintain proper airflow routing so the fan can cool or circulate air effectively
• Stops rattling or vibration caused by cracked or loose grille pieces
• Prevents airflow obstruction from broken trim that can lead to noise or reduced cooling

• One grille assembly

• Disconnect power to the appliance before starting any repair
• Keep track of mounting screws/clips and gently align grille to avoid cracking plastic tabs
• Inspect the fan blades and mounting while grille is off; replace damaged components as needed

Fix refrigerator lights staying on or not turning off when door closes. This magnetic door switch is a common solution. Simple DIY repair in 15 minutes.

Fix a stuck or non-working ice/water dispenser with this micro switch. Common cause of dispensers running continuously or not activating. Easy DIY repair.

Fixes warm or cool spots in your refrigerator. This fan guide assembly directs proper airflow in the compartment. Compatible with multiple models.

This DC motor drives the evaporator fan that circulates cold air from the evaporator coils throughout the refrigerator and freezer compartments. It is essential for maintaining even, consistent temperatures inside the unit. Replace this motor if the refrigerator is not cooling properly, the freezer is cold but the fresh food section is warm, or you hear unusual buzzing or grinding noises coming from behind the interior back panel.

A replacement cover motor that powers the refrigerator's dispenser cover, allowing the door to open and close so you can access ice and water. Replaces a worn or failed motor to restore normal dispenser cover operation. What it does:

• Drives the dispenser cover mechanism so the cover opens when dispensing and closes when idle
• Helps keep the dispenser sealed to reduce drafts and prevent pests or debris from entering
• Stops or fails to move when worn, causing a stuck, slow, or noisy dispenser cover
• Works with the dispenser linkage and gears to coordinate cover motion with user controls

What's included:

• One cover motor

Install notes:

• Disconnect power to the appliance before beginning any repair
• Remove dispenser trim and access panel per your model's service instructions to reach the motor
• Handle gears and linkage carefully; ensure proper alignment during reassembly and test cover operation before finishing

Uneven cooling or noisy damper? This damper motor support bracket secures the air control assembly for proper airflow between compartments. DIY fix.

Refrigerator not cooling properly? This damper motor support secures the air damper assembly that controls airflow between compartments. Simple DIY fix.

The Ice Dispenser Door Motor is an OEM part for LG refrigerators. This motor is responsible for the operation of the ice dispenser door, controlling its opening and closing mechanism to allow ice to be dispensed without letting warm air into the freezer. 

Symptoms of a bad Ice Dispenser Door Motor include:

• The dispenser door not opening or closing properly,
• Ice not being dispensed when activated,
• Unusual noises coming from the dispenser mechanism.

Causes of ice dispenser door motor failure can include electrical issues such as shorts or wiring problems, mechanical wear over time, or blockages that strain the motor.

This OEM LG part is also compatible with Sears/Kenmore.

Interior light won't turn off when door closes? This refrigerator door switch cover protects and aligns the switch for proper operation. Simple DIY fix.

Fix ice buildup in your refrigerator with this defrost heater. Melts frost from the evaporator during defrost cycles to restore consistent cooling.

Fix a dim or flickering refrigerator interior with this LED light assembly. Direct replacement part restores bright, even lighting in minutes.

Illuminates your refrigerator display for clear, even brightness. Replace when you notice dark spots, dim areas, or missing segments on the screen. Verify fit with your model number before ordering.

Refrigerator won't power on or loses electrical connection? This power cord assembly restores safe, reliable power delivery to your bottom-mount fridge.

Fixes refrigerator that won't start, has intermittent power issues, or unresponsive controls. Restores power distribution to all functions.

Protective cover assembly that shields the printed circuit board (PCB) in your refrigerator. Replace if cracked, broken, or missing to protect electronics.

Display cover assembly for bottom-mount refrigerators. Replaces cracked, broken, or discolored control panel covers. Protects display electronics.

The Ice Maker Assembly kit is an OEM replacement part for LG refrigerators. The ice maker receives water from the water inlet valve and then holds the water in the ice mold until the water freezes solid. It then automatically ejects the ice and refills to continue the process until the ice storage bin is full.

Causes of failure can be mineral buildup affecting moving parts, wear from the motor over many harvest cycles, or damage to internal wiring from door mishandling.

Symptoms of a problematic ice maker include:

• Incomplete or below-normal ice production
• Ice cubes appearing oddly shaped or cloudy
• Strange noise or vibrations heard from inside the freezer
• Dispenser not functioning or unresponsive

This part is also compatible with some models from Sears/Kenmore.

The Auger Motor is an OEM part for LG refrigerators. It is responsible for dispensing ice from the icemaker into the ice bucket. 

Symptoms of a bad auger motor include:

• Slow or incomplete ice filling of the ice bucket
• Ice clumping or jamming in the auger assembly 
• Grinding or rubbing noises coming from the icemaker region
• The icemaker not producing any ice at all

Causes of a bad auger motor can be wear and tear over time, freezing or ice buildup preventing proper operation, or failure of internal motor components. 

This OEM LG part is also compatible with select Sears/Kenmore models. 

Secures water supply line connections in your refrigerator. Replace if leaking, loose, or damaged to restore proper ice and water dispenser function.

Secures water tubing to prevent leaks and disconnections in your refrigerator's water line system. Replace if clip is broken, missing, or tubing moves freely. Confirm fit with your model number.

Fix inaccurate temperature readings or sensor errors with this refrigerator sensor control board. Restores proper sensor communication and feedback.

If your refrigerator display is dead, shows error codes, or behaves unpredictably, this sub PCB assembly processes inputs and controls specific functions.

The Temperature Sensor is an OEM part for LG refrigerators. Also known as a thermistor, is responsible for sensing the temperature changes and providing the necessary feedback to the refrigerator's control board. It helps maintain accurate and consistent temperature levels, ensuring optimal food preservation and efficient cooling.

Causes of a faulty temperature sensor can include wear and tear over time, damage due to electrical issues or exposure to extreme temperatures, or sensor calibration issues. These factors can result in temperature inconsistencies, inaccurate readings, or improper cooling performance of the refrigerator.

Symptoms of a bad temperature sensor may include:

• Incorrect temperature readings on the control panel
• Temperature fluctuations inside the refrigerator
• Overcooling or inadequate cooling of food items

This OEM LG part can also be used on Kenmore/Sears appliances. 

Ice bucket assembly collects and stores ice from your refrigerator's ice maker. Replace if cracked, broken, or not dispensing ice properly. Confirm fit with your model number.

Fix a dispenser that won't activate or feels stuck with this refrigerator dispenser lever. Direct replacement part for bottom-mount models. Easy repair.

Rubber cap for bottom-mount refrigerators. Covers and protects screws, bolts, or openings. Replace if cracked, missing, or worn to restore appearance.

Ice won't dispense or jams in the chute? This refrigerator ice dispenser assembly restores smooth ice delivery and fixes broken dispenser mechanisms.

Stores and supplies water to your refrigerator's dispenser and ice maker. Replace if cracked, leaking, or damaged from mineral buildup or freezing.

Replaces cracked or leaking water line connector tubes in refrigerators. Restores proper water flow between components. Confirm fit with your model number.

Secures and routes the water tube along the cabinet or door. Replace if cracked, broken, or missing to prevent kinks and keep tubing properly positioned.

Fixes no water flow, slow fill, or continuous fill issues in your refrigerator. This inlet valve controls water delivery to ice maker and dispenser.

Fix no water to icemaker or dispenser issues with this refrigerator water inlet valve. Controls water flow to dispenser and ice maker. Moderate DIY repair.

Fix no ice, slow water flow, or leaking issues with this refrigerator water inlet valve. Controls water supply to ice maker and dispenser.

Plastic cover cap for bottom-mount refrigerators. Snaps over mounting screws or fasteners to conceal hardware. Replace if cracked, broken, or missing.

Secures bracket assemblies inside your refrigerator to keep components aligned and reduce vibration. Replace if cracked, bent, or missing.

This is a replacement filter cover that secures the air filter in place and protects internal components. It restores the proper fitment of the filter and helps maintain intended airflow and filtration performance. What it does:

• Holds the air filter securely so air passes through the filter media as designed
• Protects internal components from dust and debris
• Prevents gaps that can reduce filtration efficiency or allow unfiltered air bypass
• Helps reduce rattling or vibration caused by a loose or damaged cover

• One filter cover

• Disconnect power before accessing internal parts
• Remove the old cover by releasing retaining tabs or fasteners and align new cover until it snaps or locks into place
• Inspect nearby seals and the filter; replace if damaged
• Handle plastic parts gently to avoid cracking; do not force into place

Replace a broken or leaking water filter housing that prevents water flow to your dispenser and ice maker. Direct fit for bottom-mount refrigerators.

Removes impurities and contaminants for clean, fresh-tasting water and ice. Replace every 6 months or when water flow decreases. Verify fit with your model.

Secures and protects your refrigerator's air filter, maintaining proper airflow and filtration. Replace if cracked or loose. Verify fit with your model.

Complete freezer door assembly for bottom-mount refrigerators. Replaces cracked, dented, or damaged freezer doors. Includes door shell and inner components.

Home bar cover panel for bottom-mount refrigerators. Replaces cracked, broken, or missing exterior home bar covers. Restores appearance and finish.

Secures and pivots the ice bank door for smooth opening and proper sealing. Replace if door sags, won't close, or ice dispenser misaligns. Confirm fit.

Seals your refrigerator door to keep cold air in and warm air out. Replace if torn, cracked, or not sealing properly. Confirm fit with your model number.

The Lever Cover is an OEM part for LG refrigerators. This cover fits neatly over the freezer door lock mechanism, protecting its internal lever and hardware.

Causes of a bad lever cover can include damage from regular opening and closing of the freezer door over time. Accidental impacts or heavy impacts from moving the refrigerator could also crack or weaken the plastic material.

Symptoms of a bad lever cover include:

• Exposure of the lock mechanism that allows dust and debris to enter
• Improper shielding of lock parts leading to potential jamming issues
• Cracking or breakage of the plastic allowing outside contaminants inside

This OEM LG part is also compatible with some Kenmore models.

Replaces a cracked, broken, or missing ice dispenser door handle on your refrigerator. Installs on the exterior dispenser for easy ice access.

Roller component for the ice dispenser door handle on bottom-mount refrigerators. Replaces broken, worn, or missing rollers. Ensures smooth handle operation.

Seals the ice bank door to prevent warm air from melting ice and causing clumping. Replace if ice melts, refreezes into clumps, or frost forms around the bin.

Keeps refrigerator air fresh by filtering odors and contaminants. Replace every 6 months or when indicator alerts. Confirm fit with your model number.