Parts for Lg LRMXC2206D/00: Dispenser Parts

Replacement mounting stud for refrigerator door handles. Installs inside the door to secure handle assembly. Needed when stud is damaged or missing.

Water funnel assembly for bottom-mount refrigerators. Directs water flow in the ice and water dispenser system. Replace if cracked or damaged.

Plastic drain tube that channels defrost water from evaporator coils to drain pan. Replace if cracked, melted, broken, or causing water leaks in freezer.

Leveling leg for refrigerators. Installs at bottom corner to elevate and stabilize the appliance. Replace if broken, compressed, or no longer secure.

Replace your broken refrigerator drawer tray assembly to restore proper alignment and support for stored items. Includes complete tray structure. Verify fit with your model number before ordering.

Replace a cracked, broken, or missing right-side refrigerator shelf. Restores safe, level storage for food containers and everyday items in your fridge.

Left-hand shelf assembly for bottom-mount refrigerators. Replaces cracked, broken, or missing shelves. Installs inside fresh food compartment.

Left side door shelf assembly for bottom-mount refrigerators. Replaces cracked, broken, or missing shelves. Installs on left door interior.

Replace your refrigerator's mesh shelf net when torn or stretched to restore organization and prevent items from falling through. Verify fit with your model.

Replacement door shelf net that secures small items in your refrigerator door. Installs on door shelf to replace cracked, stretched, or missing nets.

Replaces the outer cabinet panel on your bottom-mount refrigerator. Restores appearance and structural support when the original is cracked, broken, or missing.

Replacement shelf holder for bottom-mount refrigerators. Secures and supports shelves in place. Needed when original is cracked, broken, or missing.

Supports the fresh room crisper drawer area and contains spills in your refrigerator. Replace this tray if cracked, warped, or broken to restore drawer fit.

Molded plastic cover that protects the internal tray area in your refrigerator. Replaces cracked, warped, or missing covers to restore containment.

Replaces a cracked, broken, or missing tray cover in your bottom-mount refrigerator. Restores a finished appearance and protects the tray area.

Deli drawer front cover panel for LG bottom-mount refrigerators. Replaces cracked, broken, or discolored decorative cover. Clips onto panel.

Protective cover for your refrigerator's air filter. Replaces broken, cracked, or missing covers. Snaps into place for easy filter access.

Replaces a cracked, broken, or missing crisper drawer tray in your bottom-mount refrigerator. Provides stable support under vegetable drawers.

Replacement vegetable crisper drawer tray for bottom-mount refrigerators. Restores proper storage when original tray is cracked, broken, or missing.

Refrigerator lamp cover protects the interior light bulb. Replace if cracked, discolored, or broken to restore proper lighting. Verify fit with model.

Dim or uneven refrigerator lighting? This lamp cover protects and diffuses your interior light. Direct-fit replacement lens, simple installation.

Replaces a cracked, broken, or missing tray cover in your bottom-mount refrigerator. Protects tray surface and prevents spills or contamination.

Drawer rail guide assembly for bottom-mount refrigerators. Mounts inside the cabinet to support and align drawer glides. Replace if cracked or broken.

Insulating foam panel that fits inside the freezer door to maintain temperature efficiency. Replace if cracked, compressed, worn, or missing.

Frost building up or freezer not staying cold? This freezer door insulation foam assembly restores thermal efficiency and stops warm air infiltration.

Replace your oven door gasket to restore a heat-tight seal, maintain even cooking temperatures, and prevent heat loss. Verify fit with your model number.

Seals the refrigerator door to keep cold air in and warm air out. Replace if torn, cracked, or causing frost buildup. Confirm fit with your model number.

Replace a cracked, broken, or worn freezer door handle on your bottom-mount refrigerator. This assembly installs on the freezer door for secure grip.

Exterior emblem nameplate that mounts to your refrigerator's front panel. Replaces missing, cracked, or faded badges to restore a clean look.

Molded insulation insert that fits inside refrigerator doors to restore thermal barrier and reduce condensation. Replace when foam is compressed or damaged.

Seals the gap between door and cabinet to keep cold air in. Replace if you notice air leaks, frost buildup, or a loose door seal. Confirm fit with your model number.

Seals the refrigerator door to prevent cold air leaks, frost buildup, and temperature fluctuations. Replace if torn, cracked, or no longer sealing tightly.

Connects French doors on refrigerators. Replace if cracked, broken, or spring-damaged. Installs between doors to maintain proper seal alignment.

Drawer slide guide rail for bottom-mount refrigerators. Mounts to the cabinet interior to support and align drawer movement. Replace if cracked or broken.

Replacement door basket for bottom-mount refrigerators. Restores door storage for bottles, jars, and containers. Needed when original is cracked or broken.

Clear plastic storage basket that mounts inside your refrigerator door. Holds condiments, spreads, and small items. Replace if cracked, broken, or missing.

Clear plastic storage bin that mounts inside refrigerator door. Replace if cracked, broken slide pegs, or loose assembly from temperature changes.

Door stopper assembly for bottom-mount refrigerators. Installs on door to limit opening angle and prevent damage. Replace if cracked, broken, or missing.

Door stopper assembly cushions and limits refrigerator door travel. Replaces cracked, broken, or worn stoppers causing misalignment or door slamming.

Fix clicking doors or misaligned refrigerator doors with a new hinge cam. Restores smooth open/close action and proper door alignment. DIY-friendly repair.

Hinge assembly for refrigerator doors. Installs at door pivot point to support door weight and enable smooth opening/closing. Replace if cracked or worn.

Plastic door stop that limits refrigerator door swing range. Replaces broken, cracked, or missing stoppers causing doors to swing too wide or close improperly.

Replace a cracked, broken, or worn refrigerator door handle with this assembly. Mounts in the original location for a secure grip and finished look.

Slide rail that guides and supports refrigerator drawers for smooth opening and closing. Replace if worn, bent, cracked, or causing noisy operation.

Restores smooth drawer operation in your refrigerator. Replace when drawers stick, sag, or don't glide properly. Verify fit with your model number.

Ice maker grinding or not ejecting cubes? This gear drives the ejector blades to push ice from the tray into the bin. Restores harvest cycles quickly.

This Supporter Cover is a replacement plastic trim piece that helps protect and secure TV internal components and rear housing. It restores proper fit and finish to the back of the TV for safe, stable operation. What it does:

• Covers and protects internal electronics at the rear of the TV from dust and incidental contact
• Helps hold adjacent housing pieces and panels in correct alignment
• Replaces broken, cracked or missing rear trim that causes loose or rattling panels
• Restores factory appearance where the original cover is damaged or lost

• One supporter cover

• Disconnect power and remove all cables before starting any repair
• Handle the cover gently to avoid snapping tabs; use proper trim tools if needed
• Remove required screws or clips from the rear housing to access and replace the cover

Replacement ring for your refrigerator. Installs on internal components to secure or seal parts. Order a new ring if yours is cracked or missing.

Spanner wrench tool for adjusting refrigerator door hinges. Enables precise up-and-down door alignment in tight spaces. Replace if lost or damaged.

Secures and pivots your refrigerator door at the top for proper alignment and smooth operation. Replace if door sags or seals poorly. Verify fit.

Replacement refrigerator door hinge that restores smooth pivoting and proper door alignment, helping the door open and close reliably and maintain an airtight seal to preserve cooling performance. What it does:

• Supports the refrigerator door and allows it to pivot smoothly.
• Replaces worn, bent, or damaged hinges that cause door sag or misalignment.
• Helps reduce noisy or grinding door operation when the hinge is failing.
• Promotes an even door seal to help maintain internal temperature consistency.

• Unplug the appliance and remove food from nearby shelves before starting work.
• Support the door while removing hinge fasteners to prevent dropping or damage.
• Reinstall using the original hardware; align the door and tighten fasteners securely but avoid overtightening.

Replaces damaged duct vent cap assembly on your refrigerator. Install when cap is cracked, broken, or missing to restore proper airflow. Verify fit with your model number before ordering.

Lever spring for bottom-mount refrigerators. Provides tension for internal lever mechanisms. Replace if broken, stretched, or missing to restore proper fit.

If your refrigerator lever won't return to position or feels loose, this lever return spring restores proper tension for smooth operation. Direct-fit part.

Connector link between refrigerator door and cabinet. Replace if original is broken, cracked, or worn. Essential for smooth door operation and alignment.

Fix a non-responsive or broken dispenser button with this push-style lever. Restores tactile feedback and control input. Simple snap-in replacement.

Fix a refrigerator not cooling or freezing over with a new evaporator coil assembly. This part circulates refrigerant to cool your fridge compartments.

Refrigerator won't cool or compressor won't start? This overload protector prevents compressor damage from overheating or power surges. Easy DIY fix.

Fix incorrect refrigerator temperatures with this thermistor assembly. Senses temperature and signals the control board for proper cooling operation.

Rattling or loose parts in your refrigerator? This retaining pin secures moving components and keeps them aligned for smooth, quiet operation.

Support roller that mounts to the refrigerator base, allowing the unit to roll for cleaning or service. Replace if worn, broken, or causing uneven positioning.

Fixes uneven cooling and scraping noises by directing airflow from the fan. This guide restores proper air circulation throughout your refrigerator.

Fixes refrigerator running warm or compressor area overheating. This fan motor assembly circulates air over the condenser coils to regulate temperature.

Fix a refrigerator not cooling properly with this compressor sealing pipe. Essential sealed system component for restoring proper refrigeration.

Drain tray assembly that collects condensation beneath your refrigerator. Replace if cracked, broken, or missing to prevent water leakage issues.

Vibration-isolating grommet that mounts between the compressor and chassis. Replace if cracked, worn, or missing to restore proper cushioning.

Front cover panel for your refrigerator door. Snaps into place to restore appearance and protect controls. Replace if cracked, broken, or missing clips.

Rear machinery compartment cover assembly for bottom-mount refrigerators. Replaces cracked, broken, or missing covers that protect compressor components.

Replaces broken or missing refrigerator door stop. Limits door travel to prevent over-extension and maintain proper alignment and smooth operation.

This restrainer is a small retaining clip that helps secure moving or removable components in place, reducing rattles and keeping parts aligned for reliable operation. It's a simple replacement for worn or broken clips. What it does:

• Holds a cover, panel, or door-related component in proper position to prevent shifting
• Reduces noise caused by loose or vibrating parts
• Restores original fit where a broken or missing clip allows movement
• Simple mechanical function — no electrical connections or calibration

• One restrainer

• Disconnect power (and water if applicable) before beginning repairs
• Inspect surrounding mounting points for damage; replace any broken tabs or fasteners
• Typically installs with basic hand tools; align clip and press or snap into place until secure

Fridge door baffle won't stay flat when opening? This door restrainer spring keeps the baffle panel sealed. Common fix for French door models.

Secure loose internal components with this refrigerator mounting clip. Replace if parts shift or become misaligned. Verify fit with your model number.

Fix a refrigerator that's not cooling properly with this condenser wire assembly. Connects condenser components for proper heat dissipation and cooling.

Fix uneven cooling or warm spots in your refrigerator with a new evaporator fan blade. This part circulates cold air throughout the unit for consistent temps.

This grille assembly replaces a damaged or worn fan cover to protect the appliance's internal fan and help direct airflow. Restores a secure fan opening and prevents debris or contacts that can impair fan performance. What it does:

• Protects the fan motor and blades from foreign objects, pets, and accidental contact
• Helps maintain proper airflow routing so the fan can cool or circulate air effectively
• Stops rattling or vibration caused by cracked or loose grille pieces
• Prevents airflow obstruction from broken trim that can lead to noise or reduced cooling

• One grille assembly

• Disconnect power to the appliance before starting any repair
• Keep track of mounting screws/clips and gently align grille to avoid cracking plastic tabs
• Inspect the fan blades and mounting while grille is off; replace damaged components as needed

Fix refrigerator lights staying on or not turning off when door closes. This magnetic door switch is a common solution. Simple DIY repair in 15 minutes.

Fix a stuck or non-working ice/water dispenser with this micro switch. Common cause of dispensers running continuously or not activating. Easy DIY repair.

Fixes warm or cool spots in your refrigerator. This fan guide assembly directs proper airflow in the compartment. Compatible with multiple models.

Fix warm refrigerator or freezer temps with this evaporator fan motor assembly. Circulates cold air throughout compartments. Located behind freezer wall.

Powers the dispenser cover door mechanism on your refrigerator. Replace if the motor has worn out, failed, or no longer operates the cover smoothly.

Uneven cooling or noisy damper? This damper motor support bracket secures the air control assembly for proper airflow between compartments. DIY fix.

Refrigerator not cooling properly? This damper motor support secures the air damper assembly that controls airflow between compartments. Simple DIY fix.

Controls ice dispenser door opening and closing. Replace if door won't open, stays open, or motor makes no sound when dispensing. Mounts behind dispenser trim.

Interior light won't turn off when door closes? This refrigerator door switch cover protects and aligns the switch for proper operation. Simple DIY fix.

Fix ice buildup in your refrigerator with this defrost heater. Melts frost from the evaporator during defrost cycles to restore consistent cooling.

Fix a dim or flickering refrigerator interior with this LED light assembly. Direct replacement part restores bright, even lighting in minutes.

Illuminates your refrigerator display for clear, even brightness. Replace when you notice dark spots, dim areas, or missing segments on the screen. Verify fit with your model number before ordering.

Refrigerator won't power on or loses electrical connection? This power cord assembly restores safe, reliable power delivery to your bottom-mount fridge.

Fixes refrigerator that won't start, has intermittent power issues, or unresponsive controls. Restores power distribution to all functions.

Protective cover assembly that shields the printed circuit board (PCB) in your refrigerator. Replace if cracked, broken, or missing to protect electronics.

Display cover assembly for bottom-mount refrigerators. Replaces cracked, broken, or discolored control panel covers. Protects display electronics.

Fix a refrigerator that stopped making ice or produces slow, irregular ice cycles. This ice maker assembly restores automatic ice production. Moderate DIY.

Ice not dispensing or slow to fill? This auger motor controls ice movement from the icemaker to the dispenser. Fixes clumping and jamming issues.

Secures water supply line connections in your refrigerator. Replace if leaking, loose, or damaged to restore proper ice and water dispenser function.

Secures water tubing to prevent leaks and disconnections in your refrigerator's water line system. Replace if clip is broken, missing, or tubing moves freely. Confirm fit with your model number.

Fix inaccurate temperature readings or sensor errors with this refrigerator sensor control board. Restores proper sensor communication and feedback.

If your refrigerator display is dead, shows error codes, or behaves unpredictably, this sub PCB assembly processes inputs and controls specific functions.

Freezer not cooling below 24°F or refrigerator running too warm? This defrost thermostat sensor monitors temperature and signals the control board.

If ice spills in your freezer or the dispenser won't pick up ice, this refrigerator ice bucket assembly restores proper storage and delivery.

Fix a dispenser that won't activate or feels stuck with this refrigerator dispenser lever. Direct replacement part for bottom-mount models. Easy repair.

Rubber cap for bottom-mount refrigerators. Covers and protects screws, bolts, or openings. Replace if cracked, missing, or worn to restore appearance.

Ice won't dispense or jams in the chute? This refrigerator ice dispenser assembly restores smooth ice delivery and fixes broken dispenser mechanisms.

Stores and supplies water to your refrigerator's dispenser and ice maker. Replace if cracked, leaking, or damaged from mineral buildup or freezing.

Replaces cracked or leaking water line connector tubes in refrigerators. Restores proper water flow between components. Confirm fit with your model number.

Secures and routes the water tube along the cabinet or door. Replace if cracked, broken, or missing to prevent kinks and keep tubing properly positioned.

Fixes no water flow, slow fill, or continuous fill issues in your refrigerator. This inlet valve controls water delivery to ice maker and dispenser.

Fix no water to icemaker or dispenser issues with this refrigerator water inlet valve. Controls water flow to dispenser and ice maker. Moderate DIY repair.

Fix no ice, slow water flow, or leaking issues with this refrigerator water inlet valve. Controls water supply to ice maker and dispenser.

Plastic cover cap for bottom-mount refrigerators. Snaps over mounting screws or fasteners to conceal hardware. Replace if cracked, broken, or missing.

Secures bracket assemblies inside your refrigerator to keep components aligned and reduce vibration. Replace if cracked, bent, or missing.

Secures the air filter in your refrigerator and maintains proper airflow. Replace if cracked, broken, or filter won't stay in place. Verify fit by model.

Restores clean-tasting water and steady flow by filtering sediment and contaminants. Replace every 6 months or when flow weakens. Verify fit with your model.

Replace a broken or leaking water filter housing that prevents water flow to your dispenser and ice maker. Direct fit for bottom-mount refrigerators.

Secures and protects your refrigerator's air filter, maintaining proper airflow and filtration. Replace if cracked or loose. Verify fit with your model.

Complete freezer door assembly for bottom-mount refrigerators. Replaces cracked, dented, or damaged freezer doors. Includes door shell and inner components.

Home bar cover panel for bottom-mount refrigerators. Replaces cracked, broken, or missing exterior home bar covers. Restores appearance and finish.

Secures and pivots the ice bank door for smooth opening and proper sealing. Replace if door sags, won't close, or ice dispenser misaligns. Confirm fit.

Seals your refrigerator door to keep cold air in and warm air out. Replace if torn, cracked, or not sealing properly. Confirm fit with your model number.

Freezer door won't lock or close securely? This lever cover protects the door lock mechanism from wear and impact damage. Easy DIY installation.

Replaces a cracked, broken, or missing ice dispenser door handle on your refrigerator. Installs on the exterior dispenser for easy ice access.

Roller component for the ice dispenser door handle on bottom-mount refrigerators. Replaces broken, worn, or missing rollers. Ensures smooth handle operation.

Seals the ice bank door to prevent warm air from melting ice and causing clumping. Replace if ice melts, refreezes into clumps, or frost forms around the bin.

Keeps refrigerator air fresh by filtering odors and contaminants. Replace every 6 months or when indicator alerts. Confirm fit with your model number.