Parts for Ge PSA1200RWW01: 05 - Interior Parts (1) Parts

Fix microwave not starting or intermittent operation. This main control wiring harness restores reliable connections between control board and components.

This fan stirrer assembly is a direct-replacement air circulation component that helps move air inside the appliance cavity for more even temperature distribution and improved venting performance. Restores correct airflow when the original stirrer is worn or damaged. What it does:

• Circulates air to promote more even heating or cooling across the cavity
• Replaces cracked, broken, or missing stirrer blades that reduce airflow
• Helps reduce hot/cold spots and poor cooking or cooling performance
• Can eliminate unusual noises caused by a damaged or unbalanced stirrer

• Disconnect power to the appliance before starting any repair
• Remove access panels or interior liners as required to reach the existing stirrer
• Handle the plastic blades carefully to avoid damage; ensure proper alignment and secure mounting hardware
• Test appliance operation after installation and reassemble panels per OEM guidance

Replace a missing, bent, or damaged convection oven rack in your microwave. Provides a stable cooking surface for baking and roasting in convection mode.

Microwave runs but doesn't heat? The magnetron generates microwave energy to cook food. Replacing a failed magnetron restores heating performance.

Color: clear. Measures about 14 inches in diameter.

This plate side heater is the oven heating element that produces heat along the oven side to help maintain even cooking temperatures. Designed to restore proper heating when the side element is worn or failed. What it does:

• Heats the side area of the oven cavity to support even cooking and baking.
• Replaces a damaged or open side heating element that can cause weak or uneven oven heat.
• Helps address symptoms such as oven not reaching set temperature, uneven baking, or visible element damage.
• Works as a direct replacement when the original side plate heater fails.

• One plate side heater

• Disconnect power to the appliance at the breaker before starting any repair.
• Allow the oven to cool completely and use proper PPE when handling the element.
• Remove mounting screws and electrical connectors carefully; note wire locations for reinstallation.
• Reconnect securely and test the oven on a low heat setting to verify proper operation.

Fix uneven heating in your microwave. This stirrer fan cover protects the component that distributes microwave energy. Simple repair, under 10 minutes.

Truss head tapping screw for microwave interior and exterior assembly. Replaces lost, stripped, or corroded screws during repairs or maintenance.

Microwave won't heat or stops working? This thermal cutoff thermostat prevents overheating damage. DIY-friendly repair, typically takes 10-15 minutes.

Fix poor cooling and ventilation issues in your microwave with this fan assembly. Restores proper airflow and temperature regulation. Moderate DIY repair.

This circulation motor powers air movement inside the appliance to maintain proper airflow and even temperatures. Replacing a failed motor restores circulation for more consistent cooling and reduces noise or performance issues. What it does:

• Spins the fan to circulate air through the cooling/ventilation path
• Helps maintain even temperatures and proper airflow in the appliance
• Commonly replaced when airflow is weak, cooling is uneven, or the motor is noisy
• Stops operation if the motor fails, which can lead to frost buildup or reduced performance

• Disconnect power to the appliance before starting any repair
• Access and mounting steps vary by model; follow the appliance's service manual or wiring diagram
• Handle wiring connectors carefully and confirm proper fan rotation before reassembly

Fix a microwave that won't start or stops mid-cycle with this door interlock monitor switch. Ensures safe operation when door closes. DIY repair.

Binding head screw secures panels and brackets inside your microwave or wall oven. Replace if screw is stripped, missing, or damaged during service.

Mounting screw that secures the power control module inside your microwave. Replace if screw is stripped, missing, or damaged during service work.

The NTC thermistor is a temperature sensor located near the microwave's magnetron that monitors internal temperature for proper cooking control. Replace when food cooks unevenly, the microwave overheats, shuts off unexpectedly, or displays temperature-related error codes.

This AC fan motor drives the cooling fan inside a microwave or combination cooking unit, circulating air to prevent internal components from overheating during operation. It helps protect the magnetron, control board, and other electronics by dissipating heat. If your microwave overheats frequently, shuts off mid-cycle, or you no longer hear the cooling fan running, this motor likely needs replacement.

The Thermostat is an OEM part for GE microwaves. This part regulates the temperature within the microwave, ensuring it operates within safe and efficient temperature ranges. It helps prevent overheating by monitoring and controlling the internal temperature, protecting both the appliance and the user.

Causes of a bad thermostat can include wear and tear over time, electrical malfunctions, or damage from power surges.

Symptoms of a bad thermostat include:

• Microwave not heating properly
• Overheating or shutting off unexpectedly
• Error codes related to temperature issues
• Inconsistent cooking times

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Microwave not heating food? The high voltage transformer powers the magnetron. Common failure part when microwave runs but won't heat properly.

Microwave not heating or humming loudly? This high-voltage capacitor powers the magnetron. Commonly replaced with the diode. Moderate DIY repair.

This is a small synchronous motor used in microwave ovens to drive components such as the turntable or air damper. It operates at a steady rotational speed to ensure consistent movement during cooking. Replace this motor if the turntable stops spinning, rotates intermittently, or if you hear a humming noise without any movement.

Suction guide bracket that positions and supports the suction component inside your microwave. Replace if cracked, broken, or missing to restore proper alignment.

This is the support ring assembly that sits on the microwave floor and holds the glass turntable tray in place while it rotates during cooking. It typically features small wheels or rollers that allow the tray to spin smoothly. Replace this ring if the turntable wobbles, does not rotate evenly, or if the rollers are cracked or missing.

Fix a microwave turntable that won't spin or turns intermittently. This motor drives the glass tray for even heating. DIY repair in 20 minutes or less.

Secures the lead wire assembly inside your microwave. Replace if screw is stripped, missing, or no longer holds wiring securely in place.

Connects the motor to the glass tray for smooth turntable rotation. Replace if your shaft is broken, worn, or causing the tray to wobble or scrape.

Nonstick metal tray for microwave/convection models. Replaces warped, worn, or missing trays to restore stable food placement and even cooking results.

Microwave not heating? A failed diode prevents the magnetron from generating heat. This high-voltage component converts AC to DC power. DIY repair.

This is a single wiring harness used in a range or oven to carry electrical signals and power between internal components. It connects controls, sensors, or other electrical parts to ensure proper communication and operation. Replace this harness if you find damaged, burned, or corroded wires that are causing intermittent operation or error codes.

This heater sheath is the protective metal sleeve that surrounds a dryer/oven heating element, helping protect the element and focus heat where needed for reliable appliance heating performance. What it does:

• Protects and supports the heating element inside the appliance
• Helps direct and contain heat for efficient operation
• Can prevent direct contact between the element and surrounding components
• Commonly replaced when the sheath is corroded, dented, or damaged
• Linked to uneven heating or visible element damage

• High-level replacement only; disconnect power before servicing to avoid shock hazard
• Inspect surrounding components (element, terminals, mounting clips) and replace any damaged parts
• Use proper fasteners and ensure sheath is seated securely to avoid contact with other components

Fixes weak ventilation, excessive noise, or overheating in your microwave. This blower wheel restores proper airflow to clear steam and cool components.

Fix a loose or rattling capacitor with this microwave capacitor bracket. Secures the high-voltage capacitor in place. Simple repair for most DIYers.

Hexagon nut for microwave interior assembly. Secures components and panels in place. Replace if stripped, corroded, or missing during repairs.

Truss head tapping screw for microwave assembly. Secures internal components and panels. Replace if screw is stripped, missing, or lost during repair.

Truss-head self-tapping screw for securing microwave panels, trim, and brackets. Replace lost or damaged mounting screws to restore fit.