Parts for Lg LMV1831BD/00: Introduction Parts

The TEMPLATE is an OEM part for LG microwaves. It is the outer casing and control panel covering that defines the microwave's design and aesthetics.  

The causes of a bad template can include cracks, dents, or damage to the outer surface from impacts or normal wear over time. Heat and humidity fluctuations can also cause template materials to degrade.

Symptoms of a bad template include:

• Cracks or breaks in the template material
• Loose, misaligned, or damaged control panel or display  
• Yellowing, warping, or discoloration of plastics
• Openings or gaps that compromise the microwave structure

This genuine OEM LG replacement part restores the microwave's appearance and protects internal components. It is also compatible with some Kenmore and Sears microwaves
 

A Tap-Tite binding-head screw used to fasten appliance panels and components where a self-tapping metal thread is required. Replaces missing or damaged fasteners to restore secure assembly and reduce vibration or rattling. What it does:

• Creates its own mating thread in thin sheet metal for a secure hold without a nut.
• Holds panels, brackets, and trim in place to prevent looseness or movement.
• Commonly used where stripped, missing, or broken screws cause rattling, misalignment, or parts that won't stay attached.
• Compatible with standard screwdrivers or nut drivers sized to the binding-head.

• Disconnect power and unplug the appliance before working on it.
• Use the correct driver bit to avoid cam-out or head damage.
• Start straight and apply steady pressure; avoid overtightening to prevent stripping the formed threads.
• If the original hole is badly damaged, assess for repair or use of a larger fastener as needed.

This is a replacement screw used to secure appliance components and panels. It restores proper fastening where a stripped, missing, or damaged screw causes loose parts or rattling. What it does:

• Fastens panels, trim, or internal components to maintain structural fit
• Helps stop vibration-related noise from loose assemblies
• Replaces missing or corroded screws that prevent proper closures
• Restores secure mounting after repairs or disassembly

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug—do not over-torque to prevent thread damage
• Keep small parts away from children and pets
• Disconnect power or water before accessing internal parts

This customized screw fastens specific panels, brackets, or internal components in LG appliances. Replacing a missing or stripped fastener restores a secure fit and helps reduce vibration, rattling, and premature wear. What it does:

• Secures mating parts such as panels, brackets, or mounts per the appliance design
• Restores proper fit when the original screw is lost, damaged, or stripped
• Helps reduce vibration and rattling from loose components
• Maintains alignment to support correct operation of the assembly

• Includes: One screw

• Disconnect power and, if applicable, shut off water and gas supplies before servicing
• Match length and thread to the original; start by hand to avoid cross-threading
• Use the correct driver size and tighten snugly without over-torquing
• Inspect and replace any damaged clips, inserts, or mating threads before reassembly

This is the inner door frame assembly for a microwave oven. It provides the structural support for the door's window, trim, handle, and latch so the door aligns and closes properly and the interlock switches engage.

• Forms the inner structure of the microwave door and supports the window/screen, trim, and latch components
• Helps maintain alignment so the door closes and latches securely
• Replace if cracked, warped, or if mounting tabs are broken
• Typical symptoms include a door that won't close or stay shut, "door" error messages, the unit not starting unless the door is pressed, or a loose/rattling door panel

• Disconnect power before servicing; if over-the-range, support or remove the microwave before working on the door
• Use gloves/eye protection and watch for sharp edges
• Photograph door stack-up; transfer existing glass, handle, choke/trim, hinges, and screws to the new frame
• After reassembly, ensure the door closes squarely and that interlock switches engage before restoring power

Inner plastic door film covers the holes in the inner door frame.

The Choke Cover is an OEM part for LG microwaves. This is a protective shield that covers the microwave’s internal components, preventing interference and ensuring the safe operation of the microwave.  

Causes of a bad choke cover can include physical damage from accidental impacts, deterioration due to prolonged use, or exposure to high temperatures.

Symptoms of a bad choke cover include:

• Unusual noises during microwave operation
• Visible cracks or damage to the cover
• Microwave not heating food properly
• Sparks or arcing inside the microwave

This OEM LG part is also compatible with some Kenmore models.

This door latch assembly for a microwave engages the door hooks and actuates the interlock switches so the unit recognizes a closed door, restoring proper latching and helping ensure the oven only operates when securely shut.

• Engages the door hooks to trigger the interlock switches and signal "door closed"
• Can help resolve no-start or "Door/Open-Close" indications with the door shut
• Addresses a door that won't latch, feels loose, or shows cracked/worn latch parts
• Built to mount in the original location and interface with existing door switches

• Disconnect power before service; microwaves contain high-voltage components that can retain a dangerous charge
• Access typically requires removing the control panel to reach the latch/interlock bracket
• Note switch orientation and spring positions; transfer any reusable hardware from the old assembly
• After installation, verify firm door engagement and proper interlock switch actuation before restoring power

The Door Latch Spring is a genuine OEM part for LG microwaves. As a key component of the microwave, the door latch spring is responsible for providing the tension needed to securely close and latch the microwave door. It works behind the scenes to ensure a tight seal when the door is shut.

Symptoms of a bad door latch spring include:

• The microwave door not closing or latching properly 
• Gaps appearing around the door seal when shut
• Difficulty opening and closing the door

Causes of a bad door latch spring can include wear and tear over time. Exposure to excessive door slamming can also place undue stress on the spring.

This genuine LG OEM  replacement part is also compatible with Sears/Kenmore microwaves.

This outer door panel replaces the front-facing exterior panel on the refrigerator door to restore appearance and protect internal components. It provides a clean finish and a solid mounting surface for door hardware and trim. What it does:

• Replaces damaged, dented or scratched outer door surface to improve appearance
• Restores the door's protective exterior, preventing further cosmetic damage
• Provides the proper mounting surface for handles, hinges and trim pieces
• Helps maintain proper door alignment and seal by supporting attached hardware

• Remove power and empty door shelves before beginning; follow manufacturer instructions
• Transfer handles, trim and any clips from the old panel to the new panel as needed
• Use correct fasteners and avoid overtightening to prevent cracking or deformation

The Controller Assembly is an OEM part for LG countertop microwaves equipped with advanced sensor cooking functions. This assembly governs the complex algorithms that precisely combine microwave power with time to evenly and efficiently cook foods. 

Causes of a bad controller can include moisture-causing cracks in solder joints over years of use, failing low-voltage power supplies no longer maintaining firmware, or intermittent connections briefly interrupting sensor readings.

Symptoms of a bad controller include:

• Inability to detect moisture levels and accurately adjust settings  
• Cooking programs malfunctioning or no longer automatically cycling
• Flashing error codes and unstable power output levels
• Total failure to initiate or cook with sensor features

Replace yours today with this genuine OEM LG assembly to restore dependable intelligence-based functions. This controller is also compatible with GE Café, Kenmore Elite, and Samsung microwaves featuring sensor technology.

This power control board assembly is the appliance's main PCB that manages power distribution and control signals, helping restore reliable operation. Replace a faulty board to address power, control, or startup issues safely. What it does:

• Routes and regulates power to the appliance's motors, timers, and control circuits.
• Interprets user inputs and sends control signals to start cycles and manage functions.
• Common symptoms of a failing board: appliance won't start, controls unresponsive, intermittent power loss, or unexpected shutdowns.
• Can cause error codes or erratic behavior when the control electronics lose reliable power or signal processing.

• Disconnect power at the breaker or unplug the appliance before servicing.
• Take photos of wiring and connector locations before removal to ensure correct reconnection.
• Handle the PCB by its edges and avoid touching component leads; observe basic ESD precautions.

This parts assembly replaces a damaged or worn factory assembly to restore proper appliance operation. It's a direct-fit replacement designed to remove the guesswork and bring back the original function quickly. What it does:

• Replaces the factory assembly that controls related mechanical/electrical functions.
• Restores proper movement, alignment, or connection when the original assembly is worn, cracked, or broken.
• Helps eliminate symptoms such as loose components, intermittent operation, or failure of the related mechanism.
• Matches OEM fit and form for a reliable replacement when the original assembly is the confirmed failed component.

• One complete parts assembly as shown.

• Disconnect power and water before beginning any repair.
• Use basic hand tools; keep fasteners and wiring organized for reassembly.
• Verify the failed component and compare the replacement to the original before installing.

The LG microwave glass tray is an OEM replacement part for LG countertop microwaves. Located inside the microwave cavity, the glass tray provides a flat, durable surface for cooking and heating food items. The tray measures about 13 inches in diameter.

Causes of a bad glass tray can include cracks or chips from impact damage, prolonged exposure to high heat levels, or chemical etching from acidic food spills.

Symptoms of a bad glass tray microwave include:

• Cracks, chips, or breaks in the glass compromising structural integrity
• Difficulty removing or placing the tray due to a poor sliding fit  
• Food particles or liquids seeping below the tray and needing cleaning
• Visibility issues looking inside the microwave cavity  

This OEM LG part is also compatible with Sears/Kenmore countertop microwave models.

This is the turntable assembly for the microwave's rotating tray system. It provides a stable, smooth-rotating surface so dishes stay level and heat evenly, replacing a damaged, wobbly, or missing turntable to restore consistent cooking performance. What it does:

• Forms the rotating surface that supports dishes for uniform heating
• Keeps the tray centered and aligned with the drive hub/guide for smooth motion
• Replace if the tray is cracked, chipped, or missing
• Replace if the tray rocks, binds, or skips while turning
• Helps address uneven heating caused by poor or inconsistent rotation

• 1 turntable assembly

• Unplug the microwave or switch off power at the breaker before servicing
• Remove the existing turntable parts and clean the track/hub area
• Set the new assembly so it sits flat and engages the drive hub; verify smooth, unobstructed rotation
• Do not operate the microwave without the turntable properly installed

The Turntable Motor is an OEM replacement part for LG microwaves. Located under the microwave cavity, it rotates the special turntable platter during cooking operations.   

Symptoms of a faulty turntable motor include:

• Turntable failing to spin or rotating unevenly during cooking  
• Abnormal noises or vibrations coming from the bottom of the unit
• Uneven cooking results along microwave perimeter 

Causes related to normal wear of internal motor workings through extended use. Damage from power surges is also possible over time.

This LG replacement part is compatible with some Kenmore models as well.

This replacement door glass restores a clear viewing window and the protective barrier on your microwave door. Replace it when the original panel is cracked, shattered, or heavily scratched to keep the door secure and safe to use.

• Provides the see-through window and protective barrier within the microwave door
• Helps maintain proper door rigidity and alignment when intact
• Replace if the glass is cracked, chipped, shattered, loose, or badly scratched
• Reduced visibility, rattling, or visible damage are common symptoms of failure

• Unplug the microwave before servicing; microwaves can retain high voltage—use caution and do not open the cabinet
• Support the door; removal from the hinges may be required per your model's diagram
• Handle glass with cut-resistant gloves; edges can be sharp
• Transfer any reusable trim/clips as directed and verify the door latches and closes properly after installation

This turntable coupler connects the microwave's turntable motor to the glass tray, rotating it for even, consistent heating. Replace a worn or cracked hub to restore smooth tray motion and reduce noise during cooking.

• Couples the turntable motor to the glass tray for even heating
• Replaces a worn, cracked, or stripped hub that prevents rotation
• Helps reduce tray wobble and scraping sounds from the center
• Common symptoms: tray not turning, intermittent rotation, clicking/grinding at the hub

• Disconnect power before servicing; microwaves contain high-voltage components
• Remove the glass tray and roller ring; lift the old coupler straight up from the motor shaft (some models may require access from below per instructions)
• Align the new coupler with the keyed motor shaft and press it fully into place
• Reinstall the roller ring and tray; verify smooth, centered rotation

Replacement refrigerator shelf that restores usable storage space and support for food and containers. Helps keep items organized, prevents spills, and returns a stable surface after a cracked, chipped, or missing shelf. What it does:

• Provides a flat, supportive surface for storing food, containers and small appliances
• Replaces cracked, chipped or missing shelving to restore usable interior space
• Helps reduce spills and keeps items from shifting when the door is opened or closed
• Seats into the refrigerator's existing shelf supports to re-establish stable storage

• Remove the old shelf per your owner's manual by lifting or sliding it out of the shelf supports
• Handle carefully; wear cut-resistant gloves if replacing a cracked or broken glass shelf
• Place the replacement shelf into the same supports—do not force or bend the shelf

A replacement grille assembly that restores the lower front trim and airflow intake on compatible refrigerators. Improves appearance and helps protect internal components at the fridge's base. What it does:

• Covers the refrigerator toe-kick area and channels vents for proper airflow
• Replaces cracked, broken, or missing lower front trim pieces
• Helps prevent debris from entering the condenser/vent area
• Restores a finished look to the appliance front

• One grille assembly as shown

• Disconnect power to the appliance before beginning work
• Typically installs from the front with fasteners and snap clips; retain original screws if reusing
• Use care around sharp sheet-metal edges and wear gloves

A replacement mesh grease filter that traps airborne grease and large particles from range hood or microwave vent airflow, helping prevent grease buildup on internal components and improving vent performance. What it does:

• Captures grease and large cooking particles before they reach blower and ductwork
• Helps reduce stubborn grease deposits on internal hood/microwave surfaces
• Can help maintain proper airflow and reduce smoke or odor related complaints
• Fits into the hood/microwave filter frame and is intended as a direct replacement filter element

• Disconnect power to the appliance or turn off the hood light/fan before replacing the filter
• Remove the old filter per the appliance's instructions, slide or latch the new filter into the frame
• Clean and inspect the filter frame and surrounding area before reinstalling
• Allow any cleaned/damp parts to dry completely

The Light Bulb is an OEM part for LG microwaves. It provides illumination inside the microwave oven, allowing users to monitor the cooking process and check the condition of the food without opening the door.

Causes of a bad light bulb can include normal wear and tear, electrical surges, or damage due to impact or overheating. Over time, the filament inside the bulb can burn out, or the bulb itself can become loose or disconnected.

Symptoms of a bad light bulb include:

• The microwave interior light not turning on
• Flickering or dimming of the light
• Intermittent lighting during operation

This OEM LG part is also compatible with Sears/Kenmore models.

This Nut Assembly is a threaded fastener used to securely hold an associated component inside the microwave. Replacing a worn, stripped, or missing nut helps reduce vibration, eliminates rattling, and keeps parts properly aligned during operation.

• Provides a secure threaded anchor point for the matching screw/bolt
• Helps maintain alignment and prevent vibration or rattling
• Replaces stripped, cracked, or missing hardware
• Addresses symptoms like loose or shifting components and recurring rattling noises

• Disconnect power; if built-in, switch off the circuit breaker
• Access the mounting location, remove damaged hardware, and install the new nut assembly
• Avoid overtightening to prevent damage to threads or surrounding material

This part is the base for the small simmer burner on gas cooktops. It supports the burner cap and channels gas to the flame ports to promote consistent ignition and an even, stable flame. What it does

• Serves as the burner base for the auxiliary/simmer position
• Aligns and supports the burner cap for even flame distribution
• Routes gas from the orifice to the burner ports
• Common symptoms include weak or uneven flames, difficulty lighting with a known-good spark, or a cap that won't sit flat

• One auxiliary burner holder

• Disconnect power and shut off the gas supply before servicing
• Remove the grate and burner cap; take out mounting screws and lift off the old holder
• Transfer/reuse the orifice, igniter electrode, gasket, and hardware as applicable; seat the new holder evenly and tighten fasteners without over-torquing
• Restore gas and power; verify proper ignition and flame

This supporter assembly is a direct-fit replacement support bracket that helps stabilize the washer's rotating tub assembly and restore proper alignment for quieter, more reliable operation. What it does:

• Holds and supports the tub/drum assembly to reduce excessive movement during spin cycles
• Helps minimize vibration and rattling caused by worn or damaged support components
• Restores alignment to prevent rubbing or irregular drum motion
• Contributes to smoother, quieter operation when installed correctly

• Disconnect power and water before beginning any repairs
• Basic disassembly of the cabinet or front panel may be required; follow the service manual
• Use proper hand tools and take care around sharp edges and suspension components

This replacement holder/locker secures the door latch assembly so the door stays aligned and closes reliably, allowing the appliance's safety interlocks to engage and the unit to operate as intended. What it does:

• Supports and holds the door latch/latch assembly in the correct position
• Helps keep the door aligned and firmly closed so safety switches can engage
• Can resolve symptoms like a door that won't stay closed, door rattling, or the appliance failing to start due to an incomplete door closure
• Matches OEM service-panel location and function for straightforward swap-out

• Disconnect power (unplug or shut off breaker) before beginning any work
• Access may require removing the outer cabinet or control panel per the appliance service instructions
• Handle door and latch components carefully to avoid misalignment or damage

The Door Lock holder assembly is an OEM replacement part for LG microwaves. It is a component responsible for securely holding the microwave door in place and locking it closed. The door holder assembly works with other components like the door hinges and latch mechanism to provide a tight seal when cooking or warming food items.

Causes of a bad holder assembly can include wear and tear from frequent use, physical damage from slamming the door, or misalignment affecting its ability to lock the door.

Symptoms of a bad holder assembly include:

• The microwave door not staying closed
• The microwave not starting or operating due to door issues
• The door feeling loose or wobbly
• Audible clicks or resistance when attempting to close the door

This OEM LG part is also compatible with Sears/Kenmore models.

The Microwave Door Switch is an OEM replacement part for LG countertop microwaves. It monitors the door position electrically to prevent unsafe oven operation if ajar. 

Symptoms of a bad door switch include:

• Inability to start or pause a cooking cycle unless securely latched  
• Error messages about the door being open
• Inconsistent detection of open/closed door positions
• Unreliable contact functioning after extended use

Causes involve normal wear of electrical contacts and internals through many open/close uses. Exposure to moisture intrusion from spills may potentially damage sensitive switch circuitry over time as well.

This genuine LG replacement switch is also compatible with Sears/Kenmore microwaves.

The Interlock Door Switch is an OEM part for LG microwaves. It is a safety component located on the door of the microwave designed to prevent the microwave from operating unless the door is securely closed. The interlock door switch works with the microwave's electronic control board to sense when the door is open or closed and allow or disallow operation accordingly.

Causes of a bad interlock door switch can include normal wear and tear from repeated opening and closing of the microwave door over time.

Symptoms of a bad interlock door switch include:

• The microwave runs or heats with the door open
• Error codes or diagnostic messages related to door sensors on the control board
• The microwave fails to operate even when the door is securely closed

This OEM LG part is also compatible with some Sears/Kenmore microwaves.

The Transformer is an OEM part for LG microwaves. It is responsible for stepping down high voltage current from the wall outlet to safe low voltage used by the microwave's electronic control system. Located inside the microwave cabinet beneath the turntable mechanism, the transformer supplies precise power to crucial components including the magnetron, control console, and touch controls.

Causes of a transformer failing include stresses from constant heating and electromagnetic flux over many years, damage from water damage, or manufacturing defects.  

Symptoms of a bad transformer include:

• Microwave failing to heat or function 
• Faulty or unresponsive control panel and display
• Buzzing or humming noises emanating from inside

This genuine LG replacement ensures all electronic systems receive stabilized power safely. Compatible with Sears/Kenmore branded microwaves using LG components.

The Magnetron is an OEM part for LG microwaves. As the primary cooking mechanism, it generates microwave energy to heat and cook foods quickly.

Causes can be from normal wear and tear over years of use. Damage may also occur if the microwave interior is exposed to moisture, spills or debris.

Symptoms of a faulty magnetron include:

• Slow or ineffective cooking
• Hot or cold spots in cooked foods
• Buzzing or humming noises emanating from inside the microwave

This OEM LG part is also compatible with some Kenmore models.

This humidity sensor assembly monitors moisture inside the microwave cavity during Sensor Cook and Reheat cycles, allowing the control to automatically adjust time and power. Replacing a failed sensor can restore accurate, reliable sensor-based cooking performance. What it does:

• Detects steam/humidity in the cavity for auto-sensing cook and reheat programs
• Sends feedback to the control board to adjust power levels and cook time
• Failure symptoms include sensor cook not starting, stopping early, "sensor" error messages, or inconsistent results on auto settings

• One humidity sensor assembly

• Unplug the appliance before service; microwaves contain a high-voltage capacitor that can retain a dangerous charge
• Handle the sensor face carefully and keep it clean; route and secure the wire harness as originally

This high-limit thermostat monitors dryer temperature and helps stop the heating circuit if temperatures exceed safe levels, protecting the appliance and clothing from overheating. Replaces a faulty thermostat to restore proper temperature control. What it does:

• Opens the heating circuit at a preset temperature to prevent overheating
• Stops the heater when the dryer gets too hot, reducing fire risk
• Restores normal heating behavior when the thermostat is functioning correctly
• Commonly replaced when the dryer overheats, won't heat, or cycles irregularly

• Disconnect power before inspecting or replacing the thermostat
• Test for continuity with a multimeter to confirm failure before replacing
• Note wire locations or take a photo before removing connectors to ensure correct reassembly
• Check the heating element, thermal fuse, vents, and cycling thermostat if overheating or heating failures continue after replacement.

The Diode Assembly is an OEM replacement part for LG microwaves. As an electrical part, it plays a key role in regulating power distribution throughout the microwave. 

Symptoms of a bad diode assembly can include:

• Lights or displays failing to illuminate  
• Inability to power the microwave or select cooking functions
• Intermittent or unexpected shutting off during use
• Sparking, burning smells or tripped circuit breakers

Causes may arise from repetitively fluctuating power loads degrading individual diodes over time. Moisture intrusion into electrical pathways can also cause issues.

This genuine LG OEM assembly is also compatible with some Kenmore microwave models as well. 

This fuse assembly replaces a blown thermal fuse to restore overheat protection and help a dryer heat safely. It's the direct-fit component used in the appliance's safety circuit to shut off power if temperatures get too high. What it does:

• Interrupts power when excessive heat is detected to prevent overheating or fire risk
• Stops heating when the thermal element fails or air flow is restricted
• Commonly used when the dryer won't heat or trips the house circuit
• Works as part of the appliance's safety/temperature control system

• Disconnect power before inspecting or replacing the fuse to avoid shock or injury
• Replace only with the exact part number to retain OEM safety ratings
• Handle with care; do not attempt repairs on wiring or connectors
• After replacement, test the appliance on a short cycle and monitor for normal operation

The Charcoal Filter is an OEM replacement part for LG microwaves. The charcoal filter works to remove undesirable cooking odors, steam, and grease vapors from the air circulated inside the microwave. It traps airborne particles and deodorizes airflow using an advanced charcoal formulation.

Causes of a bad charcoal filter can include normal saturation over 6-12 months of regular use. Prolonged high-heat cooking and grilling can also cause premature clogging.

Symptoms of a bad filter include:

• strong lingering cooking smells that linger in the microwave interior and escape into the kitchen.
• Food may take on secondary odors from previous heating sessions.

This OEM LG part is also compatible with some Kenmore model microwaves.

This replacement lamp socket holds the light bulb and provides a stable electrical connection so your appliance light works reliably. Replace a heat-damaged or loose socket to restore consistent illumination and help prevent flicker, arcing, and premature bulb failure.

• Secures the bulb and connects it to power
• Restores proper interior or work-area lighting
• Addresses flickering, intermittent light, or bulbs failing early from poor contact
• Replaces sockets that are cracked, melted, or discolored

• Disconnect power at the breaker or unplug before servicing
• Allow the area to cool; wear gloves and safety glasses
• Note wire positions and transfer one lead at a time to the new socket
• If servicing a microwave, access only the lamp area per your model instructions; do not open the cabinet—internal components can retain high voltage

This stirrer fan cover shields the stirrer assembly at the top of the microwave cavity, helping distribute cooking energy evenly and protecting the fan from grease and splatter. Replace a cracked or burnt cover to help prevent arcing.

• Protects the stirrer fan and opening from grease, moisture, and debris
• Helps promote more even microwave energy distribution for consistent heating
• Replace if the cover is cracked, warped, burnt, missing, or won't stay secured
• Can address symptoms such as interior arcing/sparking, rattling from the top, and uneven heating

• Disconnect power: unplug the unit or switch off the circuit breaker before servicing
• Work only inside the cooking cavity; do not access internal high-voltage components
• Remove the existing cover (screw or snap tabs), note orientation, and retain any hardware for reuse
• Seat the new cover fully and secure before restoring power; test for proper operation

This thermostat is a temperature-sensitive safety switch used in LG microwaves. It monitors internal temperature and opens the circuit when overheating is detected to help protect components from heat damage.

• Monitors temperature at its mounting location inside the microwave
• Opens on overtemperature to interrupt power for safety
• Depending on model/location, a failed or open thermostat can cause no heat, the unit shutting off mid-cycle, or no power until it cools
• Helps prevent damage to the magnetron, cavity, and wiring due to overheating

• Unplug the microwave before service; the high-voltage capacitor can retain a dangerous charge
• Note wire positions, remove mounting screws, and install the new thermostat flat against the surface for proper heat sensing
• Reassemble and test; ensure vents and filters are clear to maintain proper airflow and prevent future overheating

This microwave lamp holder secures the light bulb and provides the electrical connection, helping restore dependable lighting for cooking and checking food. Replace a cracked, heat-darkened, or loose socket to address a light that won't turn on or flickers.

• Holds and insulates the bulb while connecting it to the microwave's wiring
• Common symptoms include no light, flickering, intermittent operation, or visible burning/cracking of the socket
• Restores solid electrical contact so the light works with the door or light switch
• Direct replacement for a damaged or worn lamp holder on select units

• Disconnect power at the breaker or unplug the appliance before servicing; microwaves contain high-voltage components
• Access location varies by model; note wire positions, transfer wires to the new holder, and secure with the original mounting hardware
• Restore power and test the light before fully reassembling

The Mounting Plate is an OEM part for LG microwaves. This part is designed to mount and stabilize the microwave over the range, ensuring it is safely anchored in its designated space. The mounting plate serves as an interface between the microwave and the wall or cabinet, distributing the weight evenly and providing a firm foundation for the appliance.

Causes of a bad Mounting Plate can stem from improper installation, which may lead to undue stress and eventual warping or weakening of the material.

Symptoms of a bad Mounting Plate include:

• Loose microwave unit
• Difficulty in aligning or installing the microwave 
• Visible signs of wear, rust, or damage on the plate

This OEM LG part can also be used on Kenmore/Sears appliances.

The Microwave Mounting Hardware Kit is an OEM part for LG microwaves. This kit contains all of the necessary hardware to properly mount and install an LG microwave. It ensures that the microwave is securely fastened to the cabinet or installed above the range.

Causes of faulty mounting hardware include lack of proper installation, missing or lost pieces over time, or damage.

Symptoms of missing or damaged mounting hardware include:

• Microwave not sitting securely on the mounting plate or surface
• Movement or wobbling of the microwave during operation
• Risk of the microwave falling if not properly secured

This LG part is also compatible with some Kenmore models.

The Damper Bracket is an OEM component for LG microwaves. Located inside the microwave cavity above the wave stirrer, this bracket holds the position of the damper assembly that helps distribute heat evenly during cooking. The bracket measures approximately 12” by 5”.

Symptoms of a bad damper bracket can include:  

• Hot or cold spots developing within the microwave cavity
• Looseness in the damper assembly fit
• Reduced heat circulation leading to uneven cooking

Causes typically consist of cracking over long-term heat exposure. Repeated opening/closing of the damper may also weaken attachment points on the bracket.

This OEM LG part is also compatible with Sears/Kenmore microwaves. 

The Damper is an OEM component for LG microwaves. Located within the cooking cavity, it regulates airflow and safely vents steam escaping heated foods. 

Causes of a faulty damper can involve standard wear and exposure accepting steam and condensation release. Food or liquid particles drying within tracks also threaten eventual adhesion issues restricting travel if left unaddressed between cleanings.

Symptoms of a damaged or defective damper include:

• Inability to adequately vent excess moisture from heating  
• Potential messes spilling beyond the microwave frame  
• Grating sounds or squeaks emitting during cooking
• Flaps possibly stuck inhibiting steam circulation 

This damper is also compatible with Kenmore microwaves as well.