Need Help?
Call
Replace your cracked, melted, chipped, or missing gas cooktop control knob. Fits securely on the control shaft to adjust burner flame settings.
I replaced the drip pans, grates, knobs, grease filter and downdraft grate. I have a new stove top! All for a fraction of the cost of a new one. Read more
Replacement hinge that supports and controls your oven door movement. Install if your hinge is cracked, springs are weak, or door won't align properly.
Removed oven door, took door apart replaced oven hinges. Pulled oven out of recess to access hinge receptacle. Replaced hinge receptacle. Read more
Adjustable leveling leg that stabilizes and balances your range. Replace if cracked, broken, bent, or threads are stripped from wear or impact damage.
The problem was partly caused because the original legs were at full extension. The replacement legs were longer than the originals and were more secure at the needed length. One difficulty was that the threaded base plate where the legs screwed in had been damaged and had to be reshaped, I was able to reshape the sockets with some effort, to allow the legs to thread in, though one remained slightly angled. (A metal tool of some type which could be threaded in and used to bend the socket area... Read more
Fix a broil burner that won't light or clicks repeatedly. This spark electrode generates the ignition spark needed for reliable broil operation.
I replaced the Gas Range Broil Burner Spark Electrode Read more
The Convection Fan is an OEM part for Whirlpool wall ovens and ranges. It circulates hot air inside the oven cavity, facilitating even heat distribution during the cooking and baking cycles. The convection fan enhances cooking performance through fast, forced air movement.
Causes of a bad convection fan include a failed motor, worn-out blades, or blockages that disrupt airflow.
Symptoms of a bad convection fan include:
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Replacement burner head for gas ranges and cooktops. Installs on top of the burner base to distribute gas evenly. Replace if cracked, clogged, or corroded.
Received all parts as ordered and it took about a half hour to change out all parts. Read more
Replacement broiler pan set for ovens. Includes pan and insert to catch drippings during broiling. Order if your original is missing, warped, or damaged.
I ordered the brioler pan for my new stove from y'all it was a little small but that's the part number in the book that I got with the stoveyall did a great job fast shipping just what I ordered will by from again thanks Read more
If your gas burner won't light or clicking but no spark, the spark electrode may be faulty. This part generates the spark to ignite gas burners.
This bake element supplies the primary heat from the bottom of the oven during the Bake cycle. Replace it to restore proper preheating and even results when the original is burned out, damaged, or no longer heating. What it does:
It took 10 minutes and a screwdriver, remember to turn off power to the oven at the fuse box. By the way, I ordered the part at 1:30pm and received it at 12:30pm the next day using normal shipping, not bad. Read more
Burner not heating or heating unevenly? This surface element restores consistent heat to your electric cooktop. DIY-friendly repair, typically 15-20 minutes.
Went to YouTube for pictorial on the repair. Found it to be an easy replacement. Made a wiring chart, followed the reverse order of wiring. Installed part checked that part floated on its spring mounts and did not touch anything. Checked my wiring a second time agents my chart-making shore all spade connections were tight. lowered and secured top turned power back on and tested part.. Part functions correctly. Read more
Horizontal oven door seal for top and bottom edges. Replace when worn to restore even heating and efficient baking. Hooks into slots on door frame.
A new ignitor was installed, and a new light switch was installed Read more
Fix burners that won't ignite, slow clicking, or repeated sparking. This spark module controls ignition for gas range surface burners and oven.
Replaced ignitor. Watch the u-tube videos for removing and replacing the board and ignitor. Read more
This burner head mounts on the cooktop and distributes gas evenly to produce a steady flame. Replacing a worn or damaged head restores proper flame pattern and helps your burner light quickly and cook consistently.
In an attempt to clean the range from the grease-gunk build-up, I had to remove the burner heads. Unfortunately, the 2 most used burner heads had immovable screws that locked them into the orifices underneath. After numerous hours in attempts to salvage the old burner heads and orifices attempting to remove the immovable screws, I gave up. Checked Maytag's website for parts and found nothing. Turned to AppliancePartsPros.com and found the correct parts for reasonable price in a matter of... Read more
Fix burners that won't spark or click but light with a match. This spark electrode restores ignition on gas cooktops. Typical 15-minute repair.
The burner lit when I used a lighter so figured it was electrical. There were only 2 electrical components so I first tried replacing the block terminal. This did it, very simple and saved $250 on a whole new unit. Read more
Burner only partially heating or not working? This surface heating element restores even cooking. DIY-friendly repair with photos of wire connections.
I ordered a replacement burner from AppliancePartsPros.com and replaced it using a u-tube video to find out how to do it. I took pictures of the wiring before I took it apart and then removed the burner element from the glass tom, but I left all the wires attached. I screwed the new element to the glass top and then one by one I unhooked each wire from the broken element and then hooked them each back onto the corresponding place on the new element. I used the digital pictures I took of the... Read more
This control knob fits onto the burner valve stem on the front panel of the range and is used to adjust the flame or heat level of a surface burner. It has a D-shaped shaft opening that engages with the valve stem for precise control. Replace this knob if it is cracked, melted, or if the shaft opening is worn out, causing the knob to slip and not properly control the burner.
With Appliance Parts Pro's repair videos and helpful telephone sales representatives, I felt confident in replacing by DIY the electronic control panel on our eight year old Jenn Air gas range. The part cost just under $200. I saved over $160! The replacement part arrived in two days and I replaced it in less than two hours. Thank you! Background - Initially, I called a franchise appliance repair service. Technician diagnosed that replacing the control panel ($200) would "likely" solve... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.