Need Help?
Call
Replacement dishwasher dishrack wheel installs on the upper or lower rack to restore smooth gliding. Replace worn, broken, or missing wheels to fix jamming.
Ordered replacement parts and installed them. A lot less expensive than having a dealership fix it. Read more
Dishwasher rack wheel that attaches to the upper or lower rack for smooth gliding. Replace if worn, cracked, broken, or missing to restore rack stability.
Removed and replaced wheel assemblies. Read more
Pivot shaft that supports and allows the upper spray arm to rotate in your dishwasher. Replace if broken, cracked, or worn to restore proper arm movement.
I replaced the upper nozzle guide, nozzle shaft and upper spray arm. I also replaced the pump gasket for good measure. Top rack dishes had not been cleaning properly. I first removed the filter assembly to inspect the main pump from above. It was clogged but after cleaning and reassembly I observed that while middle and bottom spray arms were changing position, the upper spray arm was not. I confirmed that water was flowing through the upper spray arm by placing some empty yogurt pots on a... Read more
Replace worn, broken, or missing lower rack rollers. This 4-pack includes white double roller attachments that snap onto your dishwasher's lower rack.
Popped the old rollers off and snapped on new ones. Read more
Replacement dishrack roller for dishwashers. Attaches to the sides of the rack to allow smooth gliding movement. Replace when cracked, broken, or worn.
Unscrewed the old rollers one at a time, and screwed in the new ones. Couldn't have been simpler. Why did I put it off for so long? Read more
Replaces damaged dishwasher dishrack wheel assembly. Installs on upper or lower rack for smooth rolling. Needed when wheels crack or tabs break.
Ordered wheel assembly. Received in a couple of days. Easy FIT project. Problem solved. Read more
Includes screws.
Replaced the upper rollers and the rack rollers along with new caps for the slide bars. Everything fit perfectly and it fixed the problem. A bit pricey but cheaper than a new dishwasher plus installation Read more
Replacement dishwasher rack wheel that guides smooth dish rack movement along the rail system. Needed when wheels are cracked, broken, or worn from use.
Rear support wheel for dishwasher lower rack assembly. Replaces broken, cracked, or missing wheels that cause dragging or misalignment on the track.
Had to unscrew the axel bolt & remove broken plastic wheel & replace it with the new plastic wheel. Easy fix. Then install newly repaired dish washer. Read more
Wheel and bearing assembly for dishwasher upper rack. Mounts to dishrack for smooth gliding on rails. Replace if worn, cracked, or broken wheels.
Replaced the upper dishrack assembly and its rollers. Read more
This is a roller assembly that attaches to the lower dishrack of a dishwasher, allowing the rack to slide in and out smoothly. The roller includes the wheel and its mounting bracket. Replace this part if the lower rack is difficult to pull out or push in, rolls unevenly, or if the existing roller is cracked, worn, or missing.
This stud is a small mounting fastener that provides a secure anchor point for attaching appliance components. Replacing a worn or missing stud restores a tight, aligned fit and helps prevent looseness, rattles, or shifting.
Extremely easy. All the parts were included, including the necessary tool to remove the old and secure the new. Awesome!! Read more
This float stem is part of the dishwasher's water-level/overfill system. It guides the tub float and actuates the float switch so the unit fills correctly and shuts off on time. Replace a worn or broken stem to restore reliable fill protection.
1. Replaced the Dishwasher motor and pump assembly. 2. Replaced the lower arm sprayer. 3. Replaced the Sump and filter. Replaced both the inlet and outlet hoses. 4. Replaced the Airgap. 5. Replaced Float Dome. 6. Replaced Water Inlet Valve. Parts $220 for Dishwasher Estimated Labor $400.00 Labor $0.00 Parts $100.00 for Pullout Faucet Estimated Labor $175.00 Labor $0.00 Read more
Replacement wheel for dishwasher lower rack. Attaches to the dishrack to allow smooth gliding during loading. Needed when wheels are cracked or worn.
Replaced broken axles and wheels. Read more
Secures the rack roller to the dishwasher tub wall for smooth gliding. Replace a cracked, broken, or loose mount to restore stable rack operation.
Fixed it with the parts purchased on Appliance Parts Pros. Small job. Read more
Upper rack wheel and mount assembly for dishwashers. Mounts to the upper dishrack to allow smooth rolling. Replace if cracked, broken, or worn.
The video on AppliancePartsPro is not for the part I ordered. After searching a bit I learned that I needed a 3/16" hex driver to remove the two screws that hold the assembly to the washer. After that it was easy. Just remove the two screws, take off the old one and attach the new one. Easy. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.