Kenmore / Sears Microwave Bracket & Flange

The Damper Bracket is an OEM component for LG microwaves. Located inside the microwave cavity above the wave stirrer, this bracket holds the position of the damper assembly that helps distribute heat evenly during cooking. The bracket measures approximately 12” by 5”.

Symptoms of a bad damper bracket can include:  

• Hot or cold spots developing within the microwave cavity
• Looseness in the damper assembly fit
• Reduced heat circulation leading to uneven cooking

Causes typically consist of cracking over long-term heat exposure. Repeated opening/closing of the damper may also weaken attachment points on the bracket.

This OEM LG part is also compatible with Sears/Kenmore microwaves. 

The Lower Lever Switch is an OEM replacement part for GE microwaves. This component activates the door interlock switch when the microwave door is closed. It ensures that the microwave only operates when the door is securely closed, preventing any operational hazards.

Symptoms of a bad Lower Lever Switch include:

• The microwave not starting, indicating the door isn't recognized as closed
• The appliance operating with the door open, a clear safety hazard
• Unusual sounds or issues when attempting to start the microwave
• The need to apply extra pressure to keep the door closed

Common causes for a malfunctioning Lower Lever Switch can be attributed to mechanical wear from frequent use, damage incurred during cleaning or use, or internal issues affecting the switch’s activation mechanism.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Replace a worn or misaligned interlock with this microwave door interlock assembly. It aligns and supports the door switches so the control accurately senses a fully closed door, restoring safe, reliable operation.

• Interfaces with the door latch hooks to actuate the safety door switches
• Ensures the microwave only runs when the door is fully closed
• Useful when the original interlock is cracked, loose, or out of alignment

• Disconnect power before service; microwaves can retain dangerous high voltage even when unplugged
• Access is typically behind the control panel; over-the-range units may need to be taken down for service
• Mount securely and verify the door latch hooks smoothly actuate the switches
• After reassembly, test door closure and start/stop operation before regular use

This holder assembly secures and guides the door latch components so the door closes firmly and the safety interlock switches engage. Replacing a worn holder restores reliable latching and helps the unit start consistently.

• Supports and aligns the latch mechanism within the door
• Ensures door hooks engage the interlock switches for safe operation
• Helps prevent a door that won't latch or pops open
• Common symptoms: unit won't start or shows a door error unless you press on the door

• Disconnect power at the breaker before service; microwaves contain high voltage even when unplugged
• Remove the door, separate the inner/outer panels, and transfer the latch holder
• Reassemble carefully, verifying smooth latch movement and proper door alignment
• Test door closure and operation before returning to service

This mounting bracket secures a designated component to the appliance frame, keeping it properly positioned and stable. Replacing a bent or broken bracket restores support and helps eliminate looseness, vibration, and misalignment during operation.

• Anchors the specified part to the chassis or panel
• Maintains proper alignment and clearances for reliable performance
• Helps prevent vibration, rattling, or shifting during use
• Common signs of failure: bent or cracked bracket, loose or misaligned components, new rattling noises

• Disconnect power and allow any hot surfaces to cool before servicing
• Note the original bracket's orientation and fastener locations for accurate reinstallation
• Transfer and tighten existing hardware securely without overtightening
• After installation, verify the supported part is secure and properly aligned

The Microwave Door Lever Switch is essential for maintaining the proper function of your microwave. This genuine OEM part ensures your appliance operates safely by controlling the door mechanism. When the door is open, the lever switch prevents the microwave from running, enhancing safety in your kitchen. Crafted with durability in mind, this switch provides long-lasting performance, reducing the need for frequent replacements. Installing the Microwave Door Lever Switch is straightforward, allowing you to quickly restore your microwave's functionality without hassle. It is compatible with a variety of Samsung microwave models, ensuring a perfect fit and seamless integration. By choosing this genuine OEM part, you guarantee the reliability and efficiency of your microwave, helping you enjoy consistent cooking results. Enhance your microwave's performance and safety with the Microwave Door Lever Switch , a dependable solution for your appliance repair needs.

This interlock is the door safety switch assembly that keeps the appliance from running with the door open, restoring proper door sensing so the unit only operates when the door is fully closed. What it does

• Acts as the door safety switch to interrupt power or start signal when the door is open.
• Prevents the appliance from starting or running if the door won't latch or the switch fails.
• Common symptom: appliance does not start or stops immediately when the door is closed or opened.
• Useful when replacing a worn or damaged door latch/switch that causes intermittent operation.

• Disconnect power (unplug or switch off at the breaker) before servicing to avoid shock or injury.
• Access typically requires removing the appliance's front or control panel; keep track of fasteners and wire locations.
• Handle electrical connectors carefully; inspect wiring and connectors for damage before reconnecting.
• Test the switch with a multimeter.

The Microwave Door Latch Body is essential for maintaining the secure and smooth operation of your microwave. Crafted to meet exact specifications, this genuine OEM part ensures a perfect fit for your Samsung microwave, providing reliable performance every time you use it. The durable construction of the latch body guarantees long-lasting functionality, preventing accidental door openings and enhancing the overall safety of your appliance. Installing this part is straightforward, allowing you to restore your microwaveGÇÖs performance without hassle. Whether your original latch is worn out, broken, or missing, the Microwave Door Latch Body offers a seamless replacement solution. By choosing this genuine OEM part, you can trust that your microwave will operate as intended, maintaining its efficiency and convenience in your kitchen. Enhance your microwaveGÇÖs reliability and ensure a secure door closure with this high-quality latch body, designed specifically for a range of Samsung microwave models.

This interlock is the door latch assembly that keeps a dryer door closed and prevents the dryer from running when the door is open. It restores proper door sensing for safe, reliable operation. What it does:

• Secures the dryer door so the machine only runs with the door fully closed
• Activates the door-safety circuit so the dryer stops when the door opens
• Commonly replaced when the door won't latch or the dryer won't start
• Helps eliminate intermittent start/no-start symptoms related to door sensing

• One interlock assembly

• Disconnect power before starting any repair to avoid electrical shock
• Replace only with the exact part number specified for your model
• Basic hand tools are typically required; avoid forcing plastic clips and connectors

The Microwave Bottom Lamp Bracket is an essential component for maintaining the functionality of your microwave. This genuine OEM part is specifically designed to securely hold the bottom lamp in place, ensuring consistent and reliable lighting every time you use your appliance. Crafted with durability in mind, the bracket provides sturdy support, preventing any wobbling or misalignment that could affect the lampGÇÖs performance. Easy to install, this Microwave Bottom Lamp Bracket allows you to quickly replace a damaged or missing part without the need for professional assistance. Compatible with a wide range of Samsung microwave models, it guarantees a perfect fit and seamless integration with your existing appliance. By choosing this genuine OEM part, you ensure that your microwave continues to operate efficiently, providing clear visibility for your cooking and reheating needs. Enhance your microwaveGÇÖs performance and extend its lifespan with the reliable and high-quality Microwave Bottom Lamp Bracket , offering a straightforward solution to keep your kitchen appliance in optimal condition.

The Microwave High Voltage Bracket is essential for maintaining the stability and safety of your microwave. This genuine OEM part is specifically designed to securely hold the high voltage components, ensuring your appliance operates smoothly and efficiently. Crafted from durable materials, the bracket provides reliable support, preventing unnecessary movement and reducing the risk of damage to critical parts. Installing this bracket is straightforward, making it an ideal choice for DIY repairs and replacements. It is compatible with a wide range of Samsung microwave models, guaranteeing a perfect fit and seamless integration. By choosing the Microwave High Voltage Bracket , you ensure the longevity and optimal performance of your microwave. This part not only restores the functionality of your appliance but also enhances its overall safety. Trust in this genuine OEM part to keep your microwave running reliably, providing you with peace of mind and excellent cooking results every time.

The Microwave Top Control Bracket is essential for maintaining the functionality and stability of your microwave. This genuine OEM part ensures a secure fit, perfectly aligning with your microwaveGÇÖs top control panel. Constructed with high-quality materials, the bracket provides durable support, preventing any wobbling or movement during operation. Installing this bracket is straightforward, allowing you to restore your microwaveGÇÖs control area without hassle. By replacing a damaged or missing top control bracket with this genuine OEM part, you enhance the overall performance and longevity of your appliance. Designed specifically for Samsung microwaves, it guarantees compatibility and seamless integration. Whether youGÇÖre addressing loose controls or repairing a broken bracket, the Microwave Top Control Bracket offers a reliable solution to keep your microwave functioning smoothly. Trust in this genuine OEM part to deliver the quality and dependability you expect from your Samsung appliance.

This door release lever links the microwave's push-button to the latch mechanism so the door unlatches and opens smoothly. Replacing a worn or broken lever restores consistent, reliable button-operated door opening. What it does

• Transfers motion from the door open button to the latch hooks to release the door
• Helps ensure smooth, consistent door opening with each press
• Common symptoms: door won't open when pressing the button, button feels loose or sticks, intermittent opening, or broken plastic fragments near the button area

• 1 door release lever

• Disconnect power before servicing; microwaves contain high-voltage components
• If over-the-range, support or remove the unit to access internal components safely
• Remove the outer cover/control panel to reach the latch area; note lever orientation before removal
• After reassembly, verify the button action and door opening/closing before restoring power

This holder/locker secures the appliance door latch assembly to keep the door aligned and closed during cycles. It restores proper latch engagement so the door stays shut and the unit can run safely. What it does:

• Supports and positions the door latch for reliable engagement
• Helps prevent the door from sagging or coming ajar during operation
• Commonly used when the door will not stay closed or latch properly
• Works with the latch assembly to maintain a tight door seal during cycles

• High-level replacement part; inspect surrounding latch and striker for damage before installing
• Power off and disconnect the appliance from the power source before starting repairs
• Use basic hand tools; retain all fasteners and observe their original placement