Kenmore / Sears Range Door, Door Glass & Parts

Restore safety and appearance with this black oven door glass panel. It replaces cracked or shattered glass, bringing back a clear viewing window and the original finish when the exterior door glass has been damaged.

• Replaces damaged door glass to restore visibility and appearance
• Helps keep the door assembly secure when installed correctly
• Common symptoms: visible cracks, shattered/spidered glass, loose or rattling panel, cosmetic damage
• Color/finish: black

• Disconnect power and let the oven cool completely before starting
• Remove the door per your manual and place it on a padded surface
• Wear cut-resistant gloves and eye protection; handle tempered glass carefully
• Transfer any handle/trim as required and reinstall without overtightening fasteners

This inner oven door glass mounts on the inside of the door to help seal in heat while letting you view cooking progress. Replace damaged glass to restore safe viewing, proper insulation, and consistent oven performance.

• Forms the inner pane of the oven door window and acts as a thermal barrier
• Helps the oven reach and maintain set temperature by limiting heat loss through the door
• Provides visibility into the oven cavity during cooking
• Replace if the glass is cracked, shattered, missing, or heat is escaping from the door

• Disconnect power and allow the oven to cool completely; if applicable, shut off gas
• Remove the door and place it on a protected, flat surface before disassembly
• Wear cut-resistant gloves and eye protection; handle glass carefully and support the edges
• Reuse existing brackets, seals, and screws; note orientation during reassembly

Color: White

Color: Biscuit. Right hand side. For left hand use WP8523173

This small, white oven door glass replaces a damaged viewing window on your appliance's door. Restore a clean look and safe visibility while helping the door contain heat and perform as designed.

• Serves as the door's viewing window and part of the multi-pane insulating system
• Replace if the glass is cracked, shattered, scratched, or permanently hazy
• Can help address poor visibility through the window or heat escaping from a damaged pane
• Safety-first: Broken tempered glass should be replaced promptly to avoid injury

• Disconnect power at the breaker (and shut off gas supply for gas units); allow the oven to cool completely
• Wear cut-resistant gloves and eye protection; handle tempered glass carefully
• Removing the door and laying it face-down on a padded surface can simplify the swap
• Transfer any trim/brackets from the old pane; do not overtighten screws and ensure gaskets/spacers are properly seated

Replace a cracked, shattered, or heat-damaged inner oven door pane with this heat-resistant glass. It restores proper insulation and visibility, helping your oven maintain temperature and protecting the door assembly from spills and high heat.

• Replaces the interior pane within the oven door assembly
• Helps retain heat for consistent cooking performance
• Shields the door liner and insulation from spills and steam
• Common signs it's needed: cracked/shattered inner glass, missing or loose pane, heat escaping, or the door exterior feeling hotter than usual

• Disconnect power or turn off gas and allow the oven to cool completely
• Remove the door per your model's instructions and place it on a padded surface
• Wear gloves; handle glass by the edges and avoid overtightening retainers
• Transfer any brackets, trim, or gasket from the original pane if your model uses them; before reassembly

This is the glass panel for the oven door. Replacing a damaged or clouded pane restores a clear viewing window and proper heat barrier so the oven can maintain temperature and you can monitor cooking safely. What it does:

• Forms the transparent window in the oven door and contributes to heat insulation
• Helps retain oven temperature for consistent baking and roasting
• Allows viewing of food without opening the door
• You may need this if the glass is cracked, shattered, permanently hazy, or you notice heat escaping around the door

• Disconnect power and let the appliance cool completely; wear cut-resistant gloves and eye protection
• Support or remove the door per the service manual and work on a padded surface
• Handle tempered glass carefully; avoid striking edges and do not overtighten fasteners
• Transfer and reuse any existing brackets, gaskets, and trim as required by your model

Replacement glass panel for the oven door. It restores a clear viewing window and helps maintain proper insulation when the original glass is cracked, shattered, or discolored.

• Forms the see-through window in the oven door
• Contributes to the door's thermal barrier to help maintain set temperature
• Replace if the glass is cracked, shattered, fogged, or has sharp edges
• Improves visibility and refreshes the appliance's appearance

• Disconnect electrical power; shut off gas supply for gas ranges
• Allow the oven to cool completely; wear cut-resistant gloves and eye protection
• Support the door and remove it if required; transfer any trim/retainers from the old glass
• Handle glass by the edges only and avoid overtightening fasteners during reassembly

This replacement door glass restores a clear viewing window and the structural integrity of your appliance door if the original glass is cracked, shattered, or damaged. It helps keep operation safe while returning the door to a like-new appearance. What it does:

• Forms the transparent viewing window in the appliance door
• Helps maintain proper door integrity and safe operation
• Restores visibility into the cavity during use
• Replaces cracked, chipped, loose, or shattered glass

• 1 door glass panel

• Disconnect power and allow the appliance to cool completely before servicing
• Wear cut-resistant gloves and eye protection when handling glass
• Support the door; some models require removing the door to access the glass
• Transfer any brackets/trim from the old glass and avoid overtightening fasteners

This replacement oven door window glass restores a clear view into the cavity and the integrity of the door assembly. Install a new pane when the original is cracked, shattered, or permanently stained to maintain safe viewing during cooking.

• Provides the transparent viewing panel in the oven door
• Helps restore door integrity when used with existing trim and gaskets
• Replace for visible cracks, chips, shattering, or persistent staining/cloudiness
• Resolve rattling or loose window conditions

• Disconnect power and allow the oven to cool completely
• Remove the door and place it on a padded surface
• Wear cut-resistant gloves and eye protection; handle glass edges carefully
• Transfer any trim/brackets from the old pane; avoid overtightening fasteners and clean fingerprints before reassembly

This is a single piece of glass, you must reuse the window frame.

Replacement glass panel that restores visibility and helps protect internal components for compatible Frigidaire appliances. Use this glass to replace cracked, chipped, or shattered panels and return your appliance to safe, usable condition. What it does:

• Replaces broken or damaged glass panels used on the appliance door, shelf, or panel area.
• Stops loose shards and visible cracks that can cause safety concerns or interfere with normal use.
• Restores clear visibility through the door or panel.
• Helps prevent further damage to internal components by replacing compromised glass.

• Disconnect power and unplug the appliance before beginning any repair.
• Handle with care and wear cut-resistant gloves and eye protection; glass edges may be sharp.
• May require partial disassembly for removal and installation—follow OEM instructions.

This replacement oven door glass panel restores safety and visibility to your range or wall oven. Replace cracked or shattered glass to maintain the door's insulating barrier and a clear view of your cooking without replacing the entire door. What it does:

• Serves as one pane of the oven door window for viewing the oven cavity
• Helps maintain proper door integrity and heat containment when used with the other panes
• Replace if the original glass is cracked, chipped, shattered, or missing
• Can resolve cloudiness or staining isolated to a damaged pane

• One glass panel

• Disconnect power or turn off gas and allow the appliance to cool completely
• Wear cut-resistant gloves and eye protection; handle the new glass by the edges
• Remove the door and disassemble the door stack; retain and reuse existing trim and fasteners
• Clean out all glass fragments before reassembly and avoid overtightening hardware

This is the replacement glass panel for the oven door. It restores a clear viewing window and proper door integrity when the original pane is cracked, shattered, or otherwise damaged.

• Forms the heat-resistant viewing window within the oven door assembly
• Helps maintain proper oven temperature by sealing the door window area
• Replace if the glass is cracked, shattered, missing, or visibly damaged
• Address heat loss and safety concerns related to a broken door pane

• Disconnect power and allow the appliance to cool completely before service
• Wear cut-resistant gloves and eye protection when handling glass
• Remove the door and disassemble on a padded surface; note pane orientation and seals
• Do not overtighten fasteners on reassembly; uneven pressure can crack the glass

The Range Glass Assembly is an OEM part for Frigidaire ranges. It covers the inner cooking cavity, protecting both the occupant and the heating elements and mechanisms inside. The glass assembly also allows for viewing into the oven to check on food without needing to open the door each time. 

Symptoms of a bad glass assembly include:

• Cracks or breaks in the glass
• Difficulty viewing into the oven cavity 
• Leaks around the glass seal
• The glass popping out of place

Causes of a bad glass assembly can be wear and tear over time, exposure to excessive heat, or damage from impacts. 

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This outer door glass replaces the damaged exterior glass on the appliance door to restore appearance and protect inner door components. Fits as the outer-facing glass panel used when the original glass is cracked, chipped, or clouded. What it does:

• Serves as the exterior glass panel on the appliance door, forming the visible outer surface.
• Protects the inner door liner, wiring, and controls from direct contact and debris.
• Restores the door's finished look when the original glass is scratched, cracked, or discolored.
• Allows safe viewing of the appliance interior where applicable without exposing internal parts.
• Prevents sharp edges and loose glass that can create a hazard.

• Disconnect power (and water, for washers) before beginning any repair; use proper lockout/tagout procedures.
• Handle glass with cut-resistant gloves and eye protection to avoid injury from broken or sharp edges.
• Removal typically requires detaching the door assembly and removing trim/retainers; keep track of screws and clips.
• Follow the appliance's service manual or OEM diagram for model-specific steps.