Kenmore / Sears Range Gas Conv Kit Parts

Orifice spud secures the burner orifice to the gas valve/manifold and directs fuel to the burner for proper flame performance. Replaces a damaged or corroded spud to help restore correct gas flow at the burner. What it does:

• Holds the burner orifice in place and channels gas from the valve to the burner.
• Helps maintain consistent flame size for even heating and cooking.
• Commonly used when a burner has weak, uneven, or intermittent flame performance.
• Replace if the spud is cracked, corroded, damaged, or leaking.

• Turn off the appliance's gas supply and disconnect power before beginning any repairs.
• Remove burner components per the service manual and install the spud in the same orientation as the original.
• Hand-start threads, then snug with the appropriate wrench—do not overtighten.
• After installation, check fittings for leaks with an approved leak-detection method; if you smell gas or suspect a leak, stop.

The LP Cnvrsn-Kit is an OEM part compatible with Whirlpool ranges. It allows a range to use liquid propane gas instead of natural gas. The kit includes all necessary components to safely convert the range.

Symptoms of a bad conversion kit include:

• Gas leaks around pipe connections 
• Unable to light burners or ovens due to issues with gas flow
• Changes in flame color or uneven cooking performance

Causes of a bad conversion kit can include damaged or worn-out components that no longer regulate gas pressure properly or provide a secure connection. 

This replacement kit is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This ignitor orifice assembly routes and meters gas to the oven burner ignitor so the oven lights reliably and reaches cooking temperature. It's a direct-replacement part used when ignition is inconsistent or the burner won't light. What it does:

• Controls gas flow from the manifold to the oven burner ignitor for proper ignition
• Helps ignition occur quickly and consistently so the oven can reach set temperatures
• Common symptoms: oven won't light, delayed or intermittent ignition, or weak/uneven heating
• Works with the oven's ignition system; replaces worn or damaged orifice assemblies

• Turn off electrical power and shut off the gas supply before starting work
• Use proper tools; do not force fittings or over-tighten connections
• After installation, restore power/gas and test the oven for proper ignition and operation

Igniter and orifice assembly includes: Igniter, orifice assembly and gas tube.

This top burner orifice meters gas to a 14,000-BTU surface burner on your range, maintaining the correct flame size and heat output. Replace a worn or incorrect orifice to restore consistent burner performance and control. What it does

• Regulates gas flow to the 14,000-BTU top burner for proper flame height and shape
• Helps resolve weak or oversized flames and uneven heating
• Can reduce yellow/orange flame tipping and improve simmer control
• Supports reliable ignition by ensuring correct fuel metering

• One 14,000-BTU top burner orifice

• Shut off gas supply and power; allow the cooktop/range to cool before service
• Remove burner cap and head to access the orifice; use the correct socket/wrench
• Install and snug—do not overtighten; verify it's the correct orifice for the burner position and gas type specified for your model
• Reassemble, check for leaks with a soapy-water solution, and verify a stable, blue flame (adjust air shutter if applicable)

For 12k burner.

Location: Right front.

This ignitor orifice assembly supplies and meters gas to the burner while positioning the ignitor for reliable ignition, helping restore consistent burner lighting and oven heat. What it does:

• Meters gas flow to the burner and aligns the ignitor for proper spark/heat-up
• Restores reliable ignition when the burner lights slowly or not at all
• Helps maintain a steady flame and consistent cooking temperatures
• Prevents intermittent ignition and repeated sparking during use

• One ignitor orifice assembly

• Shut off gas supply and power to the appliance before starting work
• Access usually requires removing the burner/grate and possibly the oven or range top; use basic hand tools
• Inspect nearby lines and fittings for damage; replace any cracked or corroded parts
• If you smell gas or are uncomfortable working on gas appliances,

This LP conversion kit lets a compatible gas range be converted from natural gas to liquid propane so it runs safely on LP fuel. It provides the small parts needed to change burner flow and restore proper combustion. What it does:

• Replaces factory orifices and/or regulator components so burners meter propane correctly
• Helps correct symptoms like yellow flames, sputtering burners, or poor heat when using LP
• Enables safe operation after fuel-type change when used with correct model conversion steps
• Preserves burner performance and efficiency once installed per manufacturer instructions

• LP conversion kit components

• Installation must follow the appliance manufacturer's conversion instructions exactly
• Use appropriate tools and discrete part identification; do not alter parts beyond instructions
• Turn off gas supply and disconnect power before starting; check for leaks after conversion

This orifice is the small gas jet that meters fuel to a range or oven burner, helping restore correct flame size and consistent heat for reliable cooking performance. What it does:

• Controls the gas flow to a burner, producing the correct flame for even heating
• Commonly used when flame is unusually small, weak, or uneven
• Helps address burners that light slowly or do not reach proper temperature
• Works as part of the burner assembly with the regulator and valve to maintain safe operation

• One orifice

• Turn off gas supply and electrical power before starting work
• Do not force threads; use appropriate thread sealant if specified by OEM
• After installation, check all fittings for leaks with a gas-safe detector or soapy water

Location: Right rear.

Natural gas. SM 1.07mm