Kenmore / Sears Wall Oven Knob, Dial & Button

This inset control knob replaces a worn or broken stove/oven control knob to restore secure, easy control of temperature and function settings. It matches OEM fit for direct replacement on compatible GE ranges and cooktops. What it does:

• Replaces a damaged or stripped control knob so settings turn and stay in place
• Provides a positive grip for precise temperature and function selection
• Restores correct fit on the control shaft to prevent slipping or wobble
• Helps resolve symptoms like a loose, cracked, or hard-to-turn knob

• Disconnect power or unplug the appliance before servicing to avoid shock or injury
• Pull off the old knob straight from the control shaft; align splines and press the new knob onto the shaft until fully seated
• Do not force the knob; if it won't seat, verify shaft type and orientation to avoid damage

This replacement timer knob attaches to the control panel timer so you can set and adjust time reliably. Replacing a worn or missing knob restores a secure grip and clear pointer orientation for everyday use.

• Attaches to the timer shaft to turn and set the kitchen timer
• Common fix for knobs that are cracked, stripped, loose, or missing
• Helps when the timer can't be set or the shaft spins without turning
• Restores smooth rotation and proper alignment on the control panel

• Disconnect power to the appliance before servicing
• Pull the old knob straight off the timer shaft
• Align the new knob with the shaft and press firmly until fully seated
• Test timer operation and pointer alignment before restoring power

The Knob, Burner is an OEM part for Whirlpool cooktops and ranges. This knob allows users to control the burner settings, adjusting the flame size and heat output for precise cooking. It is designed to fit securely onto the burner valve stem and provide a user-friendly interface for operating the cooktop.

Causes of a bad burner knob can include regular wear and tear, physical damage such as cracking or breaking, or exposure to high heat. A faulty knob can make it difficult to control the burner or render it inoperable.

Symptoms of a bad burner knob include:

• Difficulty turning the burner on or off
• Inability to adjust the flame size properly
• Loose or wobbly knob
• Visible damage or wear on the knob

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This white top valve knob is a direct-fit replacement control knob for range/stove surface burners. It restores a secure grip and clear control over the burner valve so you can select flame or heat settings more easily. What it does:

• Replaces cracked, worn, missing, or discolored surface burner control knobs
• Fits onto the valve stem to provide a positive grip for turning burner controls
• Helps prevent slipping or spinning on the valve stem during use
• Visible cosmetic refresh for the cooktop control area

• Make sure all burners are off and the appliance is cool before replacing the knob
• Align the knob splines with the valve stem and push straight on until fully seated
• If the knob does not seat or turns loosely, inspect the valve stem for damage; do not force
• If you smell gas or suspect a valve leak, stop.

Control knob that replaces a damaged or missing range control knob, restoring safe, reliable selection of heat settings. Provides secure grip and positive detents for accurate temperature adjustment on electric range controls. What it does:

• Fits onto the control shaft to select heat levels for electric surface burners or range controls.
• Replaces cracked, stripped, loose, or missing knobs that won't turn or slip on the shaft.
• Restores clear tactile stops and improves ease of setting burner or oven heat.
• Helps eliminate unsafe or imprecise temperature control caused by a compromised knob.

• Disconnect power to the appliance before servicing to avoid shock or injury.
• Pull the old knob straight off the control shaft; align splines and push the new knob on until fully seated.
• If the knob does not fit or the shaft is damaged, do not force the part—inspect and replace the underlying switch or shaft assembly if needed.
• Restore power and verify correct operation of all control settings after installation.

This selector knob replaces a damaged or worn control knob so you can select heat and function settings on your range or cooktop. It restores safe, reliable control when the original knob is cracked, loose, or missing. What it does

• Fits onto the control shaft to allow selection of burner/oven settings
• Replaces knobs that are stripped, cracked, melted, or no longer grip the shaft
• Helps restore precise control over temperature and cooking functions
• Works with push-on/pull-off style control shafts (verify shaft spline match)

• One selector knob.

• Remove power to the appliance before servicing (unplug or shut off breaker).
• Usually installs by pulling the old knob straight off and pushing the new knob onto the shaft until seated.
• Align knob splines with the control shaft — do not force; forcing can damage the shaft.
• If control shaft is damaged, the shaft or switch may also need replacement.

Color: Stainless

This control knob replaces a worn or damaged stove/oven control knob to restore safe, precise temperature and function selection. It provides a clear pointer for reliable setting selection and an OEM-fit replacement for compatible ranges. What it does:

• Fits onto the range/oven control shaft to select heat settings and functions
• Restores a secure grip and accurate pointer alignment for consistent control
• Helps eliminate slipping, loose rotation, or missing indicator issues
• Works with stove/oven front control panels that use a push-on knob interface

• Pull the old knob straight off the control shaft and push the new knob on until it seats
• Ensure the control is in the OFF position before removing or installing the knob
• If knob does not seat fully, confirm shaft adapter/orientation — do not force or use excessive heat

A black replacement knob valve that restores proper user control of your appliance's control surface. Fits the original mounting and provides a direct like-for-like cosmetic and functional replacement for a worn or damaged valve knob. What it does

• Replaces a cracked, stripped, or broken knob valve so the control can turn and select settings smoothly.
• Restores a solid grip and accurate tactile feedback when adjusting controls.
• Helps eliminate slipping, loose fit, or intermittent control engagement.
• Matches OEM appearance so the control panel looks factory-original.

• Knob valve (black)

• Disconnect power (and gas supply if applicable) before attempting any service.
• Use appropriate hand tools; avoid excessive force when seating the knob to prevent damage.

Set includes 4 black burner knobs, 3 different selector knobs and 2 different thermostat knobs. This set fits many Whirlpool made ranges. Check by model number if not sure. Made by Whirlpool.

Color: Black. To order extension shaft for this knob use 3149320.

Color: Stainless