Need Help?
Call or text
The Range Overlay is an OEM part for Frigidaire ranges. This part serves as a protective and decorative cover for the control panel, providing clear markings for the various buttons and settings. It's essential for ensuring users can accurately select and monitor cooking settings, contributing to the usability and functionality of the range.
Causes of damage to the range overlay can range from excessive cleaning, use of harsh chemicals, to simple wear and tear over time.
Symptoms of a bad Range Overlay include:
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
I first felt along each heating element (bake and broil) hoping to find a rough or blistered place on them. But they were both smooth with no irregular places. (replacing the elements would have been the easiest and cheapest repair. Pulled the back off the range (unplugged, of course) - checked wiring. There were no loose connections or burned wiring. I disconnected the elements and checked them with a ohmmeter (VOM) and both had continuity. Discovered that both elements used the same... Read more
The Overlay is an OEM part for Frigidaire ranges. This component is the interface layer that sits over the control panel, providing labels and markings for the various buttons and controls. It ensures that users can easily identify and operate the range settings.
You should replace the overlay if it becomes damaged or worn out. Causes of a bad overlay can include exposure to high temperatures, frequent cleaning, or general wear and tear, which can cause the labels to fade or peel off.
Symptoms of a bad overlay include:
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Unplugged stove. Removed six 1/4 inch socket head screws from back panel. Removed back panel. Removed plug on the back of the OCB. Removed OCB. Used Philips screwdriver to remove four mounting screws (and cracked pieces of the mounting holes). If you can get to this point, installing the new OCB is pretty self explanatory. Read more
The Overlay is an OEM part for Frigidaire ranges. It is the control panel's interface layer, displaying the various functions and settings available for the range. This component is crucial for selecting and controlling the appliance's operations, ensuring user-friendly interaction with the cooking settings.
Common causes of a bad overlay include regular wear and tear, exposure to heat, or accidental damage.
Order the part from you all. Watched the video how to install, which was easy to understand. the part arrived A DAY EARLIER than we expected! How nice is that? and installed part, stove /oven works. everybody's happy. Read more
The Range Overlay is an OEM part compatible with Frigidaire ranges. The overlay covers the control board and labels the button on the board. Causes of a bad overlay can be normal wear over time with heavy use of the range, exposure to heat and impacts, or warping from temperature fluctuations around the cooking elements. Symptoms of a faulty overlay include:
It is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore range models.
Purchased a new over control board and overlay. Installed in five minutes, and everything works great now. Shipping was super fast, and was here within two days. Read more
The Control Board Overlay is an OEM part for Frigidaire ranges. This part provides the buttons and display that control the range's functions. The overlay covers and protects the control board, ensuring that the buttons and display remain intact and operational.
Causes of a bad control board overlay can include wear and tear from regular use, exposure to heat and moisture, or damage from accidental impacts.
Symptoms of a bad control board overlay include:
Replaced Oven control Board, I actually had a "professional" appliance repair man come to the house and tell me what was wrong with the oven. While he was standing in my kitchen, I noticed he pulled up the AppliancePartsPros.com website to quote me the pricing for the parts. I did not see it necessary to pay him the marked up price. He left the house without repairing the oven I proceeded to order the parts that same evening, replaced the bad parts the same day I received them. I noticed while... Read more
The Overlay is an OEM part for Frigidaire ranges. It protects and covers the control board and features clear markings for settings and controls. This overlay ensures that users can easily read and operate the appliance, maintaining the aesthetic integrity of the kitchen unit while safeguarding the electronic components beneath from dust, splashes, and accidental touches.
Causes of a bad overlay can include peeling, fading of markings, cracks, or bubbling, often resulting from high heat exposure, frequent cleaning, or general wear and tear over time.
Symptoms of a bad Overlay include:
I installed a new clock timer and overlay the job took only a few minutes and a very easy repair. Useful hint take a picture of your clock timer before you start to make sure all your wires are put back in the right order . Charles B Lafayette Tn Read more
The Overlay is an OEM replacement part for Frigidaire ranges. Its primary function is to cover and label the selection buttons on the control board, thus facilitating easier identification and use. This part does not include any additional components, as it is just the overlay. Causes of failure relate to repeated exposure to heat and moisture around the range diminishing overlay adhesives over time. Burns or punctures are also possible from cooking mishaps. Symptoms include:
This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
Well, after searching for a model number on the range, had to pull the existing module for the part number. Ordered and was shocked to see it arrive the very next day (no, didn't pay for next day). Went back together a lot quicker then me taking apart! Read more
This control panel overlay is the adhesive label that sits over the electronic control, providing clear button legends and a clean, finished appearance. Replace a worn or damaged overlay to restore readable controls and protect the control face.
Ordered a new control board and panel. Installed the parts, then plugged in the stove. Presto changed. It works great again. Read more
This adhesive control panel overlay is the faceplate for the electronic oven control on select ranges and wall ovens. It restores readable button labels and a clean, protected surface when the original overlay is faded, bubbled, or damaged.
I went to the Appliance Parts Pros website and spoke with Shawn in customer service via the chat option. He was very helpful and suggested I order the thermostat for my stove. It arrived in about a week and I installed it the same day. It was a very easy install with the exception of the wiring harnesses didn’t match so I had to splice the wires together. It worked perfectly and now my stove is working like new. I really appreciate everything Shawn did to assist me and make this project much... Read more
This is the adhesive graphic that labels the buttons on the electronic control panel. Replacing a worn, peeling, or unreadable overlay restores a clean look and makes the keypad labels easy to see again.
Replaced the control board and panel. Read more
This is the adhesive control panel overlay for the oven/range clock and timer. It restores the readable labels and clean appearance of the control panel, making the buttons and settings easy to identify and use again.
Looked for solution on YouTube, found the possible solution. Looked up part number on AppliancePartsPros. Ordered it came in two days. Took of back, removed old board. Put in new board. plugged it in. Put back together. Worked fine. 1 hour start to finish. Cost was at least 2/3rds less than a new gas range. Read more
Color: White.
My husband turned the oven to cook one night and there was a loud pop noise. After that there was no power getting to the control board and thus leaving my oven useless I watched the very easy to follow video posted on here associated with my part and I felt confident I would be able to make this repair on my own. I bought the control board as well as the new overlay (mainly cause I didn't want to try and peel off the old overlay and reuse it) the total time for my repair was less than 15... Read more
The Overlay is an OEM part for Frigidaire ranges. It provides the protective plastic face that interfaces with the electronic control buttons and display. Causes of a bad overlay can include cracks or breaks from repeated cleaning, warping or discoloration from heat exposure over time, and physical damage from impact. Symptoms of a bad control board overlay include:
Called appliance parts pros because I couldn't find it on their website talked to an associate it didn't take 5 minutes and the part was ordered! It was delivered very quickly and was the exact same as the old one! It was a very pleasant experience! Read more
This overlay is the graphic label for the appliance's control panel. It restores clear button legends and a clean finish, replacing a worn, peeling, or damaged original so the controls are easy to read and use.
Replaced the overlay with the new part. Read more
Color: Black
Replaced the control, Read more
This is the graphic control panel overlay for the oven/range user interface. It restores legible labels and a clean appearance for touchpad buttons, helping you see and select functions accurately when the original film is worn, bubbled, or damaged. What it does
I read that the controller and probe controlled the oven temperature. Also read if replacing controller you should replace the overlay. So I ordered all three parts and installed myself with no problem. I took a photo with my phone prior to unplugging wires so I knew the right way to plug the wires into the new controller. Works like new. Only need a nut driver and screwdriver to repair. Job from star to finish approximately 30 minutes. Read more