Kenmore / Sears Wall Oven Knob, Dial & Button

Color: White

This control knob replaces a worn or missing knob on your range or cooktop. It restores a secure grip and clear selection so you can set burner or oven functions smoothly and accurately. What it does

• Attaches to the control shaft to adjust burner or oven settings
• Provides a clear pointer and positive feel for accurate selection
• Replaces knobs that are cracked, stripped, loose, or missing
• Helps ensure smooth turning and proper engagement with the control

• 1 control knob

• Disconnect power; for gas units, also shut off the gas supply
• Pull the old knob straight off the control shaft
• Align the new knob with the shaft shape and press straight on—do not force
• Verify proper orientation and operation before use

This replacement control knob lets you select settings again when the original is cracked, stripped, or missing. It fits onto the control shaft to provide a secure, easy-to-grip interface for everyday operation.

• Replaces a broken, worn, or missing selector knob
• Restores smooth, positive turning of the control shaft
• Helps ensure the pointer aligns with settings and the Off position
• Common symptoms: knob cracks, spins freely, slips, or falls off

• Disconnect power and, if applicable, shut off gas before servicing
• Pull the old knob straight off; avoid prying or twisting past the stops
• Align the new knob with the stem shape and push straight on until fully seated
• Verify smooth operation and proper alignment with the Off position after installation

This is the thermostat knob that mounts on the control shaft so you can set the temperature. Replace a cracked, stripped, or missing knob to restore smooth, reliable adjustments and clear control of your settings.

• Attaches to the thermostat shaft to select and adjust temperature
• Restores secure engagement if the original knob is cracked or stripped
• Helps ensure settings can be changed as intended
• Common signs include a loose, wobbly, broken, or missing knob

• Disconnect power and allow the appliance to cool before servicing
• Pull the old knob straight off the control shaft; avoid prying that could damage the shaft
• Align the new knob with the keyed/flat side of the shaft and press on firmly
• If your model uses a set screw, align the knob and tighten it before testing operation

This surface burner control knob fits the cooktop valve stem to turn the burner on/off and adjust heat. Replace cracked, stripped, or missing knobs to restore safe, accurate burner control. Black finish matches the original look. What it does:

• Attaches to the surface burner valve stem to control heat level
• Replaces knobs that are cracked, loose, missing, or stripped
• Helps when the burner won't turn or only turns with excessive force
• Restores proper feel and alignment when selecting settings

• 1 black surface burner control knob

• Disconnect power; for gas ranges, also shut off the gas supply
• Pull the old knob straight off the valve stem—do not pry sideways
• Align the new knob with the stem orientation and push straight on until seated
• Do not force; if the stem is damaged, the valve may require service

This control knob is the user interface for adjusting a range, oven or cooktop setting, restoring easy and accurate temperature or function selection. Durable molded construction matches the original fit and feel. What it does:

• Fits onto a control shaft to select heat levels, oven modes, or other front-panel functions
• Replaces a cracked, stripped, or missing knob that won't turn or stay set
• Restores tactile control and accurate alignment with panel markings
• Compatible with shaft-style spline stems commonly used on Frigidaire appliances

• One control knob

• Turn power/gas off and ensure controls are cool before replacing
• Match knob splines to the control shaft and push firmly until seated
• If knob resists, inspect the shaft and splines for damage before forcing
• No wiring required; if controls still do not operate after install, check the underlying switch or control

Replacement black control knob that restores grip and control for an appliance selector, timer, or temperature shaft. Simple push-on fit and textured edge make it easier to turn controls and replace worn or missing knobs. What it does:

• Provides a firm grip for turning selector, timer, or temperature controls
• Replaces cracked, faded, or missing knobs that are hard to adjust
• Seats onto the control shaft to restore accurate, tactile feedback
• Helps prevent slipping while setting temperature or cycle selections

• Most installations are simple: pull the old knob straight off and push the replacement onto the shaft until fully seated
• If the knob is difficult to remove, use a gentle, steady pull—avoid twisting hard or using excessive force
• Disconnect power to the appliance before servicing controls to reduce risk of shock or injury

Color: black. Measures about 2-1/2 inches in diameter.

Control knob that replaces a damaged or missing appliance dial to restore simple, reliable selection of temperature or cycle settings. Provides a secure grip and clear position control for everyday use. What it does:

• Replaces cracked, worn, stripped, or missing control knobs so you can select settings reliably.
• Mounts on the appliance control shaft to allow accurate pointer alignment and selection.
• Reduces slipping, spinning, or inconsistent selection when turning the dial.
• Restores the user interface so controls are easier and safer to operate.

• Disconnect power to the appliance before servicing controls.
• Most knobs simply pull off the control shaft and the replacement presses on until seated.
• If the original knob used a set screw or retaining clip, save and reinstall that hardware.
• If the knob does not seat easily, stop and verify shaft type and fit to avoid damage.

This kit includes a selector knob (1) and thermostat knob (1).

Color: White. Other colors: For black use WP9750372FF, for biscuit use WP9750372FC.

This replacement control knob lets you safely set and adjust your appliance's temperature or function with a secure, easy-to-grip interface. It restores a missing, cracked, or stripped control knob so you can operate the appliance normally. What it does

• Provides a direct user interface to turn and set temperature, burner, or cycle controls.
• Replaces knobs that are cracked, faded, loose, stripped, or missing.
• Restores positive engagement with the control shaft so settings stay in place.
• Simple push-on design.

• Turn the appliance off and ensure controls are in the OFF position before installing.
• Align the knob with the splined control shaft and push firmly until fully seated; do not force.
• If the knob feels loose after installation, inspect the control shaft and knob splines for wear before use.

This inset control knob replaces a worn or broken stove/oven control knob to restore secure, easy control of temperature and function settings. It matches OEM fit for direct replacement on compatible GE ranges and cooktops. What it does:

• Replaces a damaged or stripped control knob so settings turn and stay in place
• Provides a positive grip for precise temperature and function selection
• Restores correct fit on the control shaft to prevent slipping or wobble
• Helps resolve symptoms like a loose, cracked, or hard-to-turn knob

• Disconnect power or unplug the appliance before servicing to avoid shock or injury
• Pull off the old knob straight from the control shaft; align splines and press the new knob onto the shaft until fully seated
• Do not force the knob; if it won't seat, verify shaft type and orientation to avoid damage