Kitchenaid Blender Parts

The Kitchen Aid Blender Drive Coupler is an OEM part for Whirlpool blenders, specifically designed to connect the motor to the blender's blade assembly. This small but crucial component is responsible for transmitting the rotational force necessary for blending operations. Made from durable materials, it is engineered to withstand the stresses of frequent use.

Symptoms of a bad Blender Drive Coupler include:

• The blender’s blades not rotating despite the motor running
• Unusual noises during blender operation
• Visible wear or stripping on the coupler

Causes of a bad drive coupler can stem from overloading the blender, misalignment of the blade assembly, or simply natural wear and tear from repeated use.

This OEM part is also compatible with KitchenAid and certain models of Maytag, Jenn-Air, Amana, and Kenmore blenders.

The KitchenAid Blender Drive Coupler is an OEM part for KitchenAid blenders. This part connects the blender's motor to the blade assembly.

Causes for issues with the drive coupler often involve overloading the blender, blending hard or frozen ingredients without sufficient liquid, or simply the natural degradation of the component over time.

Symptoms of a malfunctioning Blender Drive Coupler include:

• The blender's motor running, but the blades not spinning
• Visible wear or damage to the coupler's teeth
• Unusual noises during operation, indicating a misalignment or damage

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This pusher fits into the appliance's feed opening or chute and is used to safely advance contents during operation. Replacing a damaged or missing pusher restores smooth feeding and helps prevent jams or erratic performance.

• Guides items through the feed tube/chute toward the working mechanism
• Helps maintain consistent flow and control during use
• Direct replacement for a cracked, warped, or lost pusher
• Common symptoms: items won't advance, frequent jams, needing to force contents, visible damage to the pusher

• Disconnect power before servicing the appliance
• Access the feed opening/chute and remove any broken remnants or obstructions
• Align the pusher with the guide and insert fully; do not force against resistance
• Test operation with a small amount of material

This replacement coupling links and seals wash-system components so pressurized water reaches the spray arms. Replacing a cracked or worn coupling restores cleaning performance and helps prevent drips at the connection point.

• Provides a secure, watertight connection within the dishwasher wash system
• Helps deliver proper water flow to the spray arms
• Failure symptoms can include poor cleaning, spray arms not turning, a loose/detached feed tube, or leaks at the connection
• Replace if the coupling is cracked, deformed, or stripped

• Disconnect power and shut off water before servicing
• Remove dish racks and access the coupling at the manifold/feed-tube area per your model
• Inspect existing seals/O-rings and replace if worn
• Seat and lock the coupling fully; run a short cycle to check for leaks

The Dome and Blade Assembly is an OEM part for Whirlpool blenders. This assembly includes both the dome cover and the blade, which work together to blend ingredients efficiently. The dome ensures that contents are contained within the blender jar while the blade chops, purees, and mixes the ingredients to the desired consistency.

Causes of a bad dome and blade assembly can include wear and tear from regular use, damage from blending hard or frozen items, or corrosion and dulling of the blade over time. These issues can lead to decreased performance and the potential for leaks.

Symptoms of a bad dome and blade assembly include:

• Reduced blending efficiency or inconsistent results
• Leaks from the base of the blender jar
• Unusual noises during operation
• Visible damage or dullness of the blade

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Jar lid seal for select household blenders. This flexible ring sits in the lid assembly to form a leak-resistant barrier at the top of the jar, helping keep ingredients contained and preventing drips while blending.

• Forms a tight, leak-resistant seal between the lid components and jar
• Restores proper fit when the original seal is cracked, flattened, or missing
• Typical symptoms: seepage around the lid, splatter from the top, or a lid that won't stay snug
• Normal wear can harden or deform the seal over time

• Unplug the blender and remove the jar from the base before servicing
• Remove the lid (and ingredient cap, if equipped); lift out the old seal from its groove
• Clean mating surfaces; press the new seal evenly into the groove without twisting
• Verify the seal sits flush; test with water before regular use

This washer lid assembly replaces a cracked, broken, or misaligned lid so the washer can close and lock correctly, restoring safe operation and reducing cycle interruptions caused by a lid that won't align or latch.

• Covers the tub opening and aligns with the lid lock/strike for proper engagement
• Restores the safety interlock so wash cycles can start and run without interruption
• Helps contain splashing and keeps debris out of the washer when not in use
• Typical symptoms include visible cracks or shattering, warped or loose lid, broken hinge area, or intermittent lid-lock errors

• Disconnect power before servicing
• Protect the cabinet surface and support the lid during removal/installation to prevent damage
• If required by your model, transfer existing hinge hardware and fasteners to the new lid
• After installation, check alignment and ensure the lid lock engages smoothly before running a cycle

Color: clear. It measures about 3-1/2 inches in diameter.

This pusher fits into the feed tube to guide ingredients safely and engage the cover interlock. Replace a cracked or missing pusher to restore safe operation and smooth, controlled feeding during slicing or shredding.

• Guides food down the chute while keeping hands away from sharp blades/discs
• Completes the lid/bowl interlock so the motor runs only when properly assembled
• Helps maintain even, consistent feeding for better cutting results
• Common symptoms: unit won't start unless pressure is applied to the pusher, uneven feeding, or visible cracks/missing pusher

• Unplug the appliance before servicing
• Remove the lid and old pusher; clean the feed tube area
• Align and insert the new pusher without forcing; ensure it seats fully to engage the interlock
• Handle cutting blades and discs carefully—they are sharp

This replacement seal keeps liquids and food particles out of the blender motor housing to protect internal components and help prevent leaks. Fits the motor assembly where the shaft passes through the housing. What it does

• Seals the motor shaft opening to help prevent liquid from entering the motor housing.
• Reduces risk of motor damage or shorting caused by leaks into the base.
• Helps stop leaking at the blender base or around the blade assembly when worn.
• Replace if the seal is cracked, flattened, swollen, or shows visible wear.

• Always unplug the appliance before disassembly and removal of the jar or motor housing.
• Remove the blade and jar assembly per the service diagram to access the shaft seal; inspect mating surfaces and replace damaged components.
• Ensure the new seal is seated evenly around the shaft and in its groove; do not force or over-stretch the seal.
• After reassembly, run a short water test (with the unit unplugged from any direct water source) to check for leaks before normal use.

This pusher is a small mechanical component that transfers motion and keeps mating parts aligned within its assembly. Replacing a worn or broken pusher restores smooth travel and reliable engagement so the mechanism operates as designed. What it does:

• Transfers motion to a lever, switch, or linkage to initiate movement
• Helps maintain alignment and smooth, repeatable travel of mating parts
• Restores proper engagement to reduce sticking or binding
• Typical signs it's failing: cracked or missing piece, intermittent operation, excessive force needed, or visible wear

• Pusher only

• Disconnect power; turn off water supply before servicing
• Access the assembly and note the pusher's orientation; take a reference photo
• Transfer any springs/clips from the original and securely seat the new part
• Manually check for free movement before reassembly and test operation

This bearing support keeps a rotating or sliding component aligned so the assembly moves smoothly and quietly. Replacing a worn support restores stable motion, reduces friction, and helps prevent noise and premature wear.

• Provides a low-friction support point for a mating shaft/arm
• Maintains alignment to prevent wobble, rubbing, or binding
• Helps the assembly operate smoothly and quietly
• Common failure signs: squeaking or grinding noises, rough/uneven movement, or excess play

• Disconnect power; shut off the water supply
• Access the assembly and note the original orientation before removal
• Transfer any clips, spacers, or screws from the old part as required by your model
• Do not add lubricants unless specified by the manufacturer; reassemble and test

This is the work bowl for a food processor. Replacing a worn or cracked bowl restores safe locking with the lid and base so blades/discs can operate properly and ingredients stay contained during processing.

• Contains ingredients during chopping, mixing, and slicing
• Locks to the base and interfaces with the lid/pusher to complete the safety interlock
• Guides the drive shaft for blades and discs
• Common fix for cracks, leaks, broken tabs/handle, or a processor that won't start because the bowl won't lock

• Disconnect power before servicing
• Remove the lid, pusher, and any blade/disc; lift off the old bowl
• Seat the new bowl on the base and twist to lock; then lock the lid/pusher to engage the interlock
• Wash and dry the new bowl before first use

This ball bearing replaces a worn washer or dryer bearing to restore smooth rotation and reduce grinding, rumbling or wobble during spin. A straightforward replacement part for noisy or binding drums or tubs. What it does:

• Supports the rotating tub/drum to ensure smooth, even spin
• Reduces loud rumbling, grinding or scraping noises caused by worn bearings
• Helps stop excessive vibration or drum wobble during operation
• Commonly replaced when the drum binds, drags, or turns unevenly

• Disconnect power (and water supply for washers) before beginning any repair
• Replacement requires partial disassembly of the cabinet/tub; support the drum/tub to avoid damage
• Bearings are typically pressed into place and require a puller/press or appropriate driver for safe removal/installation