Kitchenaid Basket, Silverware Basket

The Silverware Basket is an OEM part for Whirlpool dishwashers. It provides a designated area for organizing and holding silverware and small utensils during the washing cycle, ensuring they are thoroughly cleaned and properly dried. It measures approximately 5 inches wide, 9 inches high, and 20 inches deep. I

Causes of a bad silverware basket can include cracks or breaks in the plastic, warping due to exposure to high temperatures, or damage from overloading or mishandling. When the basket is compromised, it can lead to inefficient cleaning or items falling out during the cycle.

Symptoms of a bad silverware basket include:

• Broken or missing sections of the basket
• Utensils slipping through holes or falling out
• Difficulty in placing or removing silverware
• Uneven or insufficient cleaning of silverware

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Silverware Basket is an OEM part for Whirlpool dishwashers. This basket holds silverware and utensils securely during the wash cycle, ensuring they are thoroughly cleaned. It is designed to fit in the lower rack of the dishwasher and has compartments to organize various types of cutlery.

You should replace the silverware basket if it becomes damaged, worn out, or develops holes. Causes of a bad silverware basket can include regular wear and tear, exposure to high temperatures and harsh detergents, or physical damage from heavy utensils.

Symptoms of a bad silverware basket include:

• Broken or missing compartments
• Silverware falling through holes or not being held securely
• Difficulty fitting the basket into the dishwasher
• Visible cracks or warping

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Silverware Basket is an OEM part for Whirlpool dishwashers. This basket is essential for organizing and securing silverware and other utensils during the wash cycle, ensuring they are thoroughly cleaned and protected. 

The causes for the replacement of the silverware basket can include normal wear and tear from daily use, exposure to high temperatures and aggressive cleaning chemicals, or physical damage from loading and unloading utensils.

Symptoms of a malfunctioning Silverware Basket include:

• Cracks or breaks that allow silverware to fall through or hinder proper placement.
• Wear or damage that prevents the basket from fitting securely in its designated spot.
• Holes or gaps that are too large, resulting in utensils slipping out during the cycle.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Silverware Basket is an OEM replacement part for Whirlpool dishwashers. Located on the lower dish rack, it separates smaller items from dishes during cleaning cycles. The basket measures about 3 inches wide by 9 inches high by 20 inches deep. Handle included.

Causes of a bad silverware basket include broken wires from sharp items puncturing the molded plastic or excessive mineral buildup clogging the drainage holes.

Symptoms of an inadequate basket include:

• Silverware and utensils jamming washing arms and spray nozzles  
• Items collecting undesirably on the bottom of the dishwasher
• Difficulty separating washed and unwashed small wares after cycles  

This OEM replacement part is compatible with select KitchenAid, Jenn-Air models.

This is the dishwasher silverware basket that organizes and secures utensils in the lower rack for effective spray coverage. Replace a cracked, warped, or missing basket to restore proper loading, protect small items, and maintain consistent cleaning results. What it does:

• Holds and separates utensils and small items during the wash cycle
• Helps ensure thorough water spray coverage for better cleaning
• Keeps small pieces from falling through to the bottom of the tub
• Common signs you need a new basket: cracks, broken sections, warping, or utensils tipping/falling through

• 1 silverware basket

• Make sure the dishwasher is off and the cycle is complete before starting
• Remove the old basket and place the new basket in the designated area of the lower rack
• Ensure the basket sits flat and does not interfere with the spray arm before running a test cycle

Replacement silverware basket with integral handle in dark gray. Holds forks, knives and spoons in the lower dishwasher rack to keep utensils upright for better cleaning and easier loading, removal and transport. What it does:

• Holds and separates flatware to reduce nesting and promote water flow during wash cycles.
• Integrated handle makes it easy to lift the basket in and out of the rack for loading or unloading.
• Keeps small items from falling through the rack and reduces rattling during operation.
• Replace the basket if it is cracked, broken, or if utensils no longer stay securely in place.

• Installs in the lower dishwasher rack by sliding or snapping into existing rack slots; typically requires no tools.
• Make sure the basket sits level and the handle moves freely before running the dishwasher.
• Inspect for cracks or sharp edges and replace if damaged to avoid utensil loss or interference with spray action.
• Disconnect power first; this part itself does not require electrical work.

The Silverware Basket is an OEM component specifically designed for Whirlpool dishwashers. Located at the bottom outer edge of the tub, the silverware basket provides designated silverware basket dishwasher spacing to properly clean utensils away from other dishes. 

Composed of crisscrossing finger prongs attached to a reinforced circular base, the basket holds forks, knives, and spoons upright safely in place during wash cycles. Its lightweight plastic construction flexes under pressure without breaking or cracking.

Symptoms of a bad silverware basket include:

• Loose or falling utensils obstructing other spray jets   
• Dull or improperly cleaned silverware after cycles
• Visible cracks, chunks missing, or sharp prongs

Replace with this OEM Whirlpool basket to restore form-fitting function. This part fits Whirlpool, KitchenAid, Jenn-Air and select Maytag and Amana dishwashers.

This replacement knife holder secures knives upright in the dishwasher silverware basket to keep blades separated, protect cutlery, and help maintain proper spray clearance for better cleaning. Ideal when the original insert is cracked or missing. What it does:

• Holds knives upright and separated to reduce nicks and contact with other utensils.
• Prevents knives from falling through basket openings and potentially interfering with spray arms.
• Restores proper spacing in the basket so water can reach all items evenly.
• Commonly used when the original knife insert is warped, broken, or no longer grips utensils.

• Remove the silverware basket and place on a stable surface for easier access.
• Align tabs with the basket slots and press the holder into place until it snaps in; typically no tools required.
• Wear cut-resistant gloves when handling knives or damaged plastic and confirm a secure fit before running the dishwasher.

This is the center lid that fits into the washing basket/tub assembly to cover the center opening and help contain laundry during the wash cycle. It restores a proper seal and keeps items from entering the agitator area. What it does:

• Covers the center opening of the washer basket to prevent clothes from getting caught in the agitator
• Helps maintain normal wash action and water containment around the tub center
• Can resolve symptoms like items snagging near the agitator, visible gap in the basket center, or loose/missing center cover
• Matches OEM fit and geometry for correct placement in the basket assembly

• One lid, basket center

• Disconnect power and water to the appliance before beginning any repair
• Removal/install typically requires accessing the washer basket; follow the OEM service manual for steps
• Use hand tools as needed and avoid forcing plastic tabs to prevent breakage

This midline silverware basket holds utensils during wash cycles so forks, knives and spoons stay contained and clean. It replaces a damaged or missing basket to restore proper utensil organization and dishwasher performance. What it does:

• Holds and separates silverware so items wash and drain properly
• Prevents small items from falling to the tub or blocking the spray arm
• Helps maintain wash coverage and prevents utensil nesting that reduces cleaning
• Fits the dishwasher's midline position to match original loading layout

• Remove lower rack to access midline basket; align and snap into the rack grooves per original fit
• No tools usually required, but handle gently to avoid cracking plastic parts
• Inspect surrounding rack clips and supports and replace if broken to ensure secure fit
• Always unplug or disconnect power and follow dishwasher manufacturer's safety instructions before servicing

This durable silverware basket holds forks, knives and other utensils securely during dishwasher cycles so small items stay corralled and clean. Fits into the dishwasher rack to keep cutlery organized and prevent items from falling through. What it does:

• Holds and organizes silverware and small kitchen utensils during wash cycles
• Keeps utensils upright and separated for better cleaning and drying
• Prevents small items from slipping into the dishwasher spray area or drain
• Replaces cracked, broken or missing baskets that allow cutlery to scatter

• No tools required; remove the lower rack and set the basket into the designated rack slots
• Ensure basket snaps or rests securely and does not interfere with rack movement or spray arms
• Inspect basket for cracks or sharp edges before use; discontinue use if damaged
• Always follow the appliance manufacturer's safety and installation instructions

The Silverware Basket is an OEM component specifically designed for Whirlpool dishwashers. Located at the bottom of the dishwasher, the silverware basket provides an isolated space for washing smaller silverware and utensils. 

The silverware basket is constructed of durable plastic coated with a non-slip material on the bottom. It features folded edges and reinforced sides to securely hold silverware in place during the washing cycle. Partitions and prongs within the basket help separate pieces and prevent tangling.

Symptoms of a bad silverware basket include:

• Silverware escaping from the basket during the wash cycle 
• Damage, cracks, or loose pieces on the basket
• Missing partitions or prongs

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement silverware basket holds forks, knives and spoons securely during dishwasher cycles so utensils come out separated for better cleaning and easier unloading. Durable plastic construction designed for direct fit replacements. What it does:

• Keeps silverware organized and upright for improved water flow and cleaning
• Prevents small items from falling to the bottom of the tub or blocking spray arms
• Helps protect utensils from contact with larger dishes and racks
• Restores a missing, cracked or damaged utensil basket so loading is safer and neater

• One silverware basket

• Fits into the lower rack; simply drop into place and ensure it sits level
• Remove power or run an empty rinse cycle before working in the dishwasher for safety
• Inspect rack wheels and clips for damage before reinstalling; do not force into a warped rack
• Avoid overfilling to prevent bending or cracking

Right-side basket lid for top-load washers. Replaces a cracked or damaged right-side lid to help contain laundry, reduce splashing and restore the basket cover so the washer closes and operates as intended. What it does:

• Covers the right side of the inner wash basket and helps keep clothes from catching on the basket edge.
• Helps reduce water splash and keeps items contained during the wash.
• Restores proper fit and alignment of the basket cover area that may affect lid closing.
• Used when the original right-side lid is cracked, warped, or broken.

• Disconnect power and water supply before beginning service.
• Handle edges carefully; wear gloves to avoid sharp edges on broken parts.
• Installation typically requires removing the outer cabinet or basket access panels and securing the lid with existing fasteners — follow the model's service manual for exact steps.

This replacement left-side lid for the silverware basket restores coverage and helps keep utensils contained during dishwasher cycles. It matches OEM fit and appearance so the basket functions as designed. What it does:

• Covers and secures utensils in the left section of the silverware basket
• Helps prevent small items from shifting or falling through during wash cycles
• Restores proper basket alignment for even water flow and rinsing
• Reduces the chance of utensil contact with rotating spray arms

• Snap-in replacement; no special tools typically required
• Remove the silverware basket to access and align the lid before snapping into place
• Inspect surrounding basket clips/rims for damage and replace if worn to ensure secure fit
• Disconnect power to the appliance and follow the manufacturer's safety instructions before servicing