Lawn Mower Control Cable

This engine zone control cable is an authentic OEM replacement part for a push lawn mower. This cable connects the engine to the control bar and is essential for the engine to run. A control bar acts as a safety mechanism that keeps the engine from running unless it is depressed. Therefore, without this cable, the engine and control bar will be out of communication and the engine will not start or run. Like with any cable, an engine zone control cable can snap if put under too much pressure. Often, temperature changes can cause the cable to tense, and when a user pulls the cable, it can snap. The most obvious sign of a broken engine zone control cable is that the control bar has a lot more give and the engine will not start. Replacing the cable is an easy job. Simply remove the broken cable from the control bar and release it from the stop lever using a pair of pliers. This part is compatible with Poulan, Ryobi, Weed Eater, Jonsered, and Husqvarna push mowers and is sourced from the original manufacturer. This part ships individually.

This part is a replacement drive control cable. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a snapped, worn, or faulty drive cable in a variety of lawnmower models. The drive control cable enables the equipment user to have proper control over the lawnmower and is essential for maneuverability. Cables can become worn or stretched or may snap with regular use. If this occurs, the lawnmower may not be drivable, and this part must be replaced. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this drive control cable, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this drive control cable is suitable for use on several different models of lawnmowers manufactured by Husqvarna and Poulan. This is a genuine part made of high-quality, durable materials and is sold individually.

This engine zone control cable is a genuine Husqvarna part, sold individually. This engine zone control cable can be used as a replacement part for a lawn mower. This part allows the user to easily control the mower.The engine zone control cable might need to be replaced if the component is damaged. Damage could include fraying, puncturing, tearing, warping, or otherwise falling apart to the point that the component can no longer serve its key function. If this occurs, the engine zone control cable should be removed and replaced by this genuine OEM replacement part before using the lawn mower again.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This engine zone control cable is compatible with the following outdoor appliance brands: Husqvarna, Poulan, Craftsman, and Jonsered.

This control cable is a genuine Husqvarna part, sold individually. This control cable can be used as a replacement part in a lawnmower. The purpose of the control cable in a lawnmower is to allow the operator to monitor and regulate the speed, pace, and propulsion of the appliance by engaging and disengaging the cable.Over time, a control cable may experience fraying, scratching, tearing, ripping, warping, or eroding. If this occurs, the control cable should be removed and replaced by this genuine OEM replacement part in order to facilitate continued use of the lawnmower by the operator in a safe and proper manner.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This control cable is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, and Murray.

This is an engine zone control cable, also known as a control cable, manufactured by Husqvarna. This component stops the blade when a lawn mower handle is released. When this part goes bad, it can cause the brake not to release even when the handle is pressed down. Engine zone control cables are known for experiencing wear and tear with regular use. If the cable has any signs of damage, cracking, wear, or stretching, it will need to be replaced. First, disconnect the spark plug wire before releasing the cables from the handle. Next, remove the drive cover before removing the engine zone control cable. The replacement engine zone cable can be connected to the transmission and the drive cover can be replaced. Install the control cable back onto the mower handle, reconnect the spark plug wire, and the lawn mower will be usable again. This is a genuine OEM replacement part that comes directly from the manufacturer. It can be used for mowers from Husqvarna, Weed Eater, AYP, Craftsman, RedMax, Poulan, Poulan Pro, Jonsered, and McCulloch. It is sold individually, and the replacement is considered easy. A screwdriver and pliers are the only tools that will be needed.

This throttle control assembly is a genuine MTD part sold individually. This throttle control assembly can be used as a replacement part in a lawnmower. The purpose of the throttle control assembly in a lawnmower is to allow the operator of the appliance to fully regulate and maintain the speed and pacing of the appliance to a customized setting that adheres to the needs and comfort of the operator.The throttle control assembly could be punctured, dented, ripped, torn, scraped, scratched, warped, or eroded, and if this damage precludes the function of the throttle control assembly, it should be removed and replaced by this genuine OEM replacement part. Always unplug the appliance before performing any kind of repair or replacement.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This throttle control assembly is compatible with the following outdoor appliance brands: MTD and Craftsman.

This engine zone control cable is a genuine Husqvarna part, sold individually. This engine zone control cable can be used as a replacement part in a lawnmower. This cable allows the user to control the mower.The engine zone control cable might need to be replaced if the cable becomes frayed, punctured, ripped, torn, warped, eroded, or otherwise damaged. If this occurs and cannot be fixed by a basic repair, the engine zone control cable should be removed and replaced by this genuine OEM replacement part before using the lawnmower again. This replacement should be undergone in accordance with the instructions sourced from a relevant appliance manual.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This engine zone control cable is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

This clutch cable is a genuine Husqvarna part, sold individually. This clutch cable can be used as a replacement part in a lawn mower. The purpose of the clutch cable in a lawn mower is to provide the operator with a means of stopping and starting the lawn mower while in use, by engaging and disengaging the clutch cable when the operator wants to move the appliance forward or stop the appliance from moving.The clutch cable in a lawn mower might be subject to damage at some point within the typical lifespan of the appliance. If this damage prevents the clutch cable from serving its standard function for the lawn mower, the clutch cable should be removed and replaced by this genuine OEM replacement part before using the lawn mower again, so that the safe use of the appliance can be guaranteed. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This clutch cable is compatible with the following outdoor appliance brands: Husqvarna.

This replacement part is a brake control. This is a genuine replacement part made by Husqvarna. This part allows the user to control the brakes from the user settings so that they are able to operate the machinery to their desired settings. A new brake control might be needed if the current one is stripped down in any way. This can be due to normal wear and tear over time. If the user is unable to properly control the braking system, it might be a good idea to replace this part. Be sure the engine is powered down and cooled off before attempting to replace this part. Refer to the user manual for more information on this process.This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This part is a replacement drive control cable. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a worn out or faulty drive control cable in a variety of lawnmower models. The drive control cable is essential for proper control of the lawnmower as it stops the engine when the handle is released. If the cable is stretched, worn, or otherwise damaged, the equipment is not safe to use and this part should be replaced immediately. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this drive control cable, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this drive control cable is suitable for use on several different models of lawnmowers manufactured by Husqvarna and Jonsered. This is a genuine part made of high-quality, durable materials and is sold individually.

This part is a replacement engine zone control cable. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a faulty engine zone control cable in a variety of models of lawn mowers.Engine zone control cables ensure that the engine shuts off when the user releases the handle. This part is necessary for proper and safe equipment functionality and thus will need to be replaced is snapped, stretched, or malfunctioning in any way. When working on or near an enginee, it is important to ensure the equipment is powered down and completely cool before beginning repairs. For more accurate information on how and where to place this engine zone control cable, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this engine zone control cable is suitable for use on lawn mowers manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This replacement part is a cable control. It is a genuine replacement part made by Husqvarna. This part is typically found in lawnmowers and allows the user to control the settings of the appliance by using the cable. This is attached to the engine and allows different settings and powers to be selected.A new control cable might be needed if the current one is damaged or missing. If the control cable is stripped from regular use over time, it is recommended that it be replaced. If the user is unable to control the appliance from the control cable, it can be due to a faulty cable. Be sure the engine is powered off completely before replacing it.This is a genuine OEM replacement part to ensure long-lasting use. This part is sold individually and is sourced directly from the manufacturer to ensure a proper fit.