Need Help?
Call or text
Usually ships within 4 - 14 days
The drive clutch cable is a clutch or engagement cable that tightens the drive belt or lifts the spinning friction disc contained within the drive housing. It will cause contact between the driveshaft and turn the wheels. If the wheels refuse to turn, it may be due to a cable that is damaged, loose, or snapped. If tightening the tension fails to yield results, this OEM replacement cable is needed. Replacing a drive clutch cable is fairly easy. Remove the original and use pliers and a socket set to install and tighten the new one. "This is a drive clutch cable designed for use in snowblowers produced by MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Huskee, Yard-Man, and others. It ships individually and is made of rubber, wire, and metal.
This control cable is a mower part that works with the control handle or lever bar that engages the wheels. It is also known as choke cable, brake cable, choke control, and control assembly cable. The inner wire total length is 53 inches, and the cable casing or conduit length is 40 inches. The control cable can stretch over time and it will result in a mower that moves forward slower than usual. A cable that's too corroded won't be capable of moving the drive lever. A broken or cut cable won't make the mower move. Here is a manufacturer-approved replacement control cable that's easy to install. A genuine OEM replacement part, this control cable is made to fit specific models of walk-behind mowers from Bolens, Ryobi, MTD, Troy-Bilt, and Yard-Man. It is sold individually.
Took it off and put the the new one on. It was very easy and works like a charm now. Read more
This high-quality drive control cable is used on wheeled trimmers and lawnmowers. The control cable is the part that causes the blade to stop when the control handle is released. It connects the drive control lever to the transmission so the equipment will move or stop when going across the lawn. If the cable is broken or becomes damaged, the brake will not release even if the lever is pressed. If the lawn equipment no longer stops or doesn't move when it should, the drive control cable likely needs to be replaced. Remove the spark plug wire from the spark plug and then release the cables from the handle. Take off the drive cover and remove the drive control cable. Once it has been removed, the new replacement part can be installed before reassembling the other components.This drive control cable is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part and includes a rubber insulated cable. This component is made for use with lawnmowers and string trimmers created by Poulan, Craftsman, Weed Eater, and Husqvarna.
This drive control cable from Husqvarna is what connects the transmission to the handle drive control level so the transmission engages when a lawn mower is pushed over grass. The cable can sometimes experience problems like breaking, being damaged, or freezing up in its sheath, which can make the lawn mower impossible to move. The first step to replacing a drive control cable is removing the spark plug wire and making sure there is no fuel in the lawn mower. Next, the cables need to be released from the handle before removing the drive cover. At this point, the drive control cable can be taken from the anchor post and removed. The new drive control cable should be attached to the transmission, the drive cover should be reinstalled, and the drive cable will need to be installed on the mower handle. This control cable is designed to be used with lawn mowers made by Husqvarna and Craftsman. It is an original part that comes directly from the manufacturer and it is sold individually. To replace the drive control cable, pliers will be needed for the job. Basic tools may be needed to handle the replacement.