Leaf Blower Filter

This authentic OEM part is a replacement foam air filter for a gas-powered leaf blower. For a gas-powered engine to work, it must maintain a balance of fuel and oxygen. This means it is constantly taking in air from outside the engine. However, working in dusty areas can cause a lot of debris to mix with the air. A foam air filter helps to catch that debris before it can clog up an engine. After an extended period of use, though, the filter will become clogged. Replacing a foam air filter is an easy repair that will only require a screwdriver. Remove the air filter cover, take out the old filter, and put in the new filter. This part works with gas-powered leaf blowers from Poulan, Weed Eater, and Husqvarna and is sourced directly from the original manufacturer. It ships individually.

The fuel filter is designed to clean the fuel before it enters the carburetor. This helps to catch dirt and debris that can get into the fuel line and build up over time, affecting the performance. When there is a clean fuel filter in place, the engine will run at peak performance. Over time, the filter will become dirty and clogged with debris and fuel residue, requiring replacement as a part of routine maintenance. This OEM replacement can get lawn and garden equipment back in shape in no time. Prior to the repair, make sure to disconnect the spark plug and drain the fuel. This genuine OEM fuel filter from Husqvarna is compatible with multiple models of engines. It can be used with chainsaws from Poulan, Jonsered, and Husqvarna, including more than 150 different models. This filter is sold as an individual unit.

This is a heavy-duty air filter for leaf blowers. It is made of pleated paper. It is most commonly included on gas powered backpack blowers. The purpose of the air filter is to keep any dust, dirt, and debris from entering the carburetor or engine of the blower. The air filter should be checked regularly as clogs can occur and prevent air from reaching the carburetor. If the air filter is dirty, it will need to be replaced to avoid damage to other components.Replacing the air filter is simple and involves taking off the air filter cover using its included tabs. Next, remove the old air filter and then clean in the air filter base to remove extra dirt and dust. The next air filter can be installed in the base before reassembling the other components.This air filter comes as an individual component. It is designed for use with leaf blowers manufactured by Echo and Shindaiwa. Each air filter is a genuine OEM replacement part that is directly sourced from the manufacturer. No tools are required to make the replacement.

This foam air filter is a genuine replacement for select Husqvarna engines. The air filter is made from high-quality foam that allows it to capture particles and debris before they enter the carburetor to improve engine performance. The air filter naturally becomes clogged over time with regular use of the machine and will need to be changed regularly in order to prevent restricted airflow that could affect engine performance. It will require replacement as a part of routine maintenance, but intermittent repairs may come up, as well. It is often a good idea to keep an extra air filter on hand for emergency replacements. This genuine OEM part is the perfect fit for compatible engines. This genuine replacement air filter is designed for use with trimmers, pole saws, edgers, brushcutters, and other select models. This air filter comes pre-oiled and is able to be installed without any tools. Allow the engine to cool before changing the air filter or doing any other repairs. This air filter is sold as an individual unit.

The air filter on lawn machines protects from dirt and debris. Lawn equipment typically creates a substantial amount of dust and dirt, and the air filter is needed to ensure that dirt does not get into the engine and the carburetor. The air filters are designed to trap dirt, which means that they will eventually need to be replaced. The longer they are used, the more clogged they will become. This can prevent enough air from getting into the carburetor, which could result in issues with the engine misfiring and starting properly. Owners should regularly check the condition of the air filters and replace them when they become too dirty. This is a genuine OEM part sold individually that will replace air filters on trimmers, leaf blowers, and pole pruners. The part is compatible with a range of brands including Craftsman, Weed Eater, Poulan, and Husqvarna.

This replacement air filter is designed as a replacement for select lawn and garden engines. This filter is located near the carburetor and is responsible for filtering the air that comes into the engine. The dense foam catches particles, debris, and residues so that only the purest air gets in the carburetor for optimal performance. Over time, air filters become clogged with regular use, so replacing them is considered a part of routine maintenance. However, they also may need to be replaced intermittently. If the engine is not running properly or there are visual signs of a dirty air filter, this part can offer a replacement for compatible engines. This OEM foam air filter is compatible with select engines from Husqvarna, including those on leaf blowers from Craftsman, Poulan and Poulan Pro, AYP, and Weed Eater. Always allow the engine to cool completely before starting repairs and wear gloves for hand protection at all times. Replacing the air filter is a simple task that doesn’t usually require tools. This replacement part is sold individually and comes as a single unit.

This replacement part is an air cleaner assembly. This is a genuine replacement part made by MTD. This air cleaner assembly is able to filter the air coming in and out of the machine to ensure it is free of dust and other debris. This part is able to keep the engine safe and allows it to run smoothly and effectively. A new air cleaner assembly might be needed if the current one is damaged or too dirty to clean. If the current part does not filter air properly, it is recommended that it be replaced as soon as possible. If not up to working standard, this part can cause the engine to become damaged as too much dust or debris is harmful to the engine. Be sure that the engine is completely shut down before replacing this part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is a genuine OEM replacement part.

The genuine replacement air filter is made of foam and catches dust and debris from the air as it enters the engine on select lawn and garden equipment. Over time, filters will become clogged with regular use, which makes replacing them a part of routine maintenance on most engines. The air filter may also become clogged intermittently or due to excessive dust buildup between maintenance schedules, so it may be helpful to keep an extra filter on hand for emergency replacements. These filters cannot be cleaned and must be replaced when they become clogged. This genuine OEM filter is manufactured to exact standards by Husqvarna and is designed for use with hundreds of machines from Jonsered and Husqvarna, including blowers, trimmers, edgers, hedge trimmers, and saws. Replacing the air filter does not require any tools. Allow the engine to cool and simply remove the filter cover, take out the old filter, and replace the new filter. Then replace the cover. Always wear gloves when performing engine work. This filter is sold as a single unit and does not include the air filter cover or base assembly.

This air cleaner element is a genuine Echo replacement part for small engines that operate hedge trimmers. The function of an air cleaner element is to create a seal that protects the engine from collecting and taking in external dirt and debris that might debilitate the engine's infrastructure. The air cleaner element could fail from overuse; it is a part that must eventually be replaced as a part of routine maintenance, even with ordinary long-term use. If the air cleaner element is not effectively sealing, the rate at which the engine takes in air is lessened, thereby reducing the power and the fuel economy of the engine. If this occurs and it is determined that an overused or over-aged air cleaner element is at fault, as opposed to the air filter or another closely associated part, the air cleaner element should be replaced immediately and the appliance at hand should not be in use until it has been replaced. This air cleaner element is compatible with Echo brand hedge trimmers. This part sold individually.

Created for use with leaf blowers, the air filter housing is located on top of the filter. It is used to ensure dirt, dust, and other debris cannot reach the filter. Without the air filter housing, the filter would become dirty more quickly and require replacement. The air filter housing is an important part made of durable materials, but it can become damaged or lost. If this occurs, the component will need to be replaced.Before the replacement starts, check to be sure the leaf blower is cool and powered off. Remove the spark plug wire to prevent accidental starting of the engine. A screwdriver and other tools may be needed to make the replacement. Locate the air filter housing and unscrew it from the base of the leaf blower to uncover the air filter. The same screws can be inserted into the replacement component and installed on the leaf blower. Replace the spark plug wire before using the equipment as normal.Sourced from the manufacturer, the air filter housing is an authentic OEM replacement part. It is priced individually and can be used as a replacement component for several Weed Eater leaf blowers.