Lg Washer Support Parts

The Washing Machine Shock Absorber Kit is an OEM part for LG washing machines. This kit includes a shock absorber designed to reduce vibrations and absorb shocks during the wash cycle, providing stability and minimizing excessive movement. 

Over time, the shock absorbers can wear out due to regular use, exposure to heavy or unbalanced loads, or damage from impact. These factors can lead to reduced effectiveness of the shock absorbers, causing increased vibrations and noise.

Symptoms of a bad shock absorber kit include:

• Excessive shaking or vibrating during the wash cycle
• Loud banging or thumping noises
• The washer moving or "walking" during operation
• Leaks due to increased stress on the tub and other components

This OEM LG part is also compatible with Sears/Kenmore.

The Spider is an OEM replacement part for LG washing machines. The spider is a central part located inside the washer tub that the inner tub spins on during the washing cycle. It plays an important role in evenly distributing load vibration across the washer tub and chassis.

Causes of a bad spider can include cracks or wear to the plastic housing over time due to continuous use and load stress, or damage from heavy impacts during transport or installation.

Symptoms of a bad spider include:

• Excessive vibration and noise during spin cycles
• The inner tub wobbling or becoming imbalanced
• Cracks or breaks in the spider housing
• Premature wear of other internal components like bearings

This genuine LG OEM replacement part is also compatible with some Kenmore models.

The Suspension Rod Assembly is an OEM part for LG washing machines. This assembly includes multiple rods designed to support the washing machine drum and minimize vibrations during the wash and spin cycles. By stabilizing the drum, the suspension rods help ensure smooth and quiet operation, preventing excessive movement that could damage the appliance.

Causes of a bad suspension rod assembly can include wear and tear from regular use, imbalance due to overloading the washer, or physical damage from accidental impacts. When the suspension rods are compromised, the washing machine may become unstable and noisy.

Symptoms of a bad suspension rod assembly include:

• Excessive shaking or vibrating during wash cycles
• Loud banging or thumping noises
• The washing machine moving or "walking" during operation
• Uneven or incomplete washing due to an unstable drum

This OEM LG part is also compatible with Sears/Kenmore models.

The Shock Absorber Kit is an OEM part for LG washing machines. This part minimizes vibrations and absorbs shocks during the washing and spinning cycles. By stabilizing the drum, these shock absorbers ensure smooth and quiet operation, preventing excessive movement and potential damage to the washer.

Causes of a bad shock absorber can include wear and tear over time, heavy or unbalanced loads that put extra strain on the absorbers, or damage from impact or mishandling. 

Symptoms of a bad shock absorber include:

• Excessive shaking or vibrating during the wash cycle
• Loud banging or knocking noises
• The washer moving or "walking" during operation
• Leaks due to increased stress on the tub and other components

This OEM LG part is also compatible with Sears/Kenmore.

The Suspension Assembly is an OEM part for LG washing machines. This part ensures the stability of the washer during operation by absorbing vibrations and reducing movement. The suspension assembly maintains the balance of the wash drum during the spin cycle, preventing excessive shaking or noise.

Causes of a bad Suspension Assembly can stem from normal wear and tear over time, overloading the machine beyond its capacity, or consistently washing unbalanced loads, which put additional stress on the suspension components.

Symptoms of a bad Suspension Assembly include:

• Unusual noise during the spin cycle
• Excessive vibration or shaking of the machine
• The washing machine "walking" or moving from its designated spot
• Uneven distribution of laundry leading to imbalanced loads

This OEM LG part is also compatible with Sears/Kenmore.

This is a spider arm assembly for washing machines. Another name for the spider is the rear tub support because it provides support for the outer tub. The spider has three legs that are approximately 10 inches long each. washing machines might need a new spider arm assembly if it is very noisy, if it shakes excessively while running, if the drum is emitting burning smells at high speeds, or if it is smoking. If upon visual inspection, the spider arm assembly is rusted or corroded, it will need to be replaced. The dryer drum may appear to have cracks, but this is how it is manufactured during the casting process. This is a genuine LG part and is an OEM part sourced directly from the manufacturer. It is sold individually. This specific spider arm assembly is compatible with washing machines that are LG and Kenmore manufacture.

The Spider is an OEM part for LG washing machines. As the rear tub support, it is located behind the outer tub and provides structural support during the spinning cycles. The spider braces against excessive vibration and movement to maintain integrity of the washer tub under heavy loads.

Causes of a bad spider can include cracks, breaks, or loosening due to wear and tear over time from stress of the spinning cycles. Metal fatigue from years of use also contributes.

Symptoms of a bad spider include:

• Excessive shaking and rattling during spin cycles
• Rubbing or grinding noises emanating from the rear of the washer
• Difficulty with load distribution and spinning effectiveness
• Potential leaks due to compromised tub support

This LG part is also compatible with some Kenmore models.

The Spider Arm is an OEM part for LG washing machines. As an important component linking internal mechanics, the spider arm connects the basket or tub to other components like the drive motor. It facilitates the spinning motion essential for washing cycles while also enabling water to properly agitate clothing. 

Symptoms of a bad spider arm include:

• The tub not spinning or spinning unevenly
• Vibration or noise issues arising from the center of the machine  
• Water not draining or agitating clothes as intended
•  premature wear on other connected parts over time

Causes of a bad spider arm can be regular use over several years, damage from excessively heavy loads, or impact from an object inside the tub. Not replacing a faulty spider arm can accelerate damage to other expensive parts. 

This LG replacement part is also compatible with Sears/Kenmore models. 

This drum spider supports and centers the inner tub in front-load washers. It bolts to the drum and couples to the drive shaft to keep spins smooth and balanced, reducing noise and vibration as the original wears.

• Supports and centers the inner spin basket within the outer tub
• Transfers drive power through the shaft to spin the drum
• Maintains drum alignment to help prevent rubbing and noise
• When worn: loud banging/rumbling on spin, excessive vibration, metallic scraping, unbalance/spin errors, wetter-than-normal loads

• Disconnect power and water; move the washer to a stable work area
• Access requires removing panels, the door boot, and separating the tub to lift out the inner basket
• Clean mating surfaces; install and tighten bolts in a crisscross pattern to ensure even seating
• Inspect rear tub bearings and seal while open; reassemble and run a test spin to check for leaks and vibration

This washer shock absorber mounts between the outer tub and base to control movement during spin. Replacing a worn damper restores stability, reduces vibration and noise, and helps prevent the machine from walking or banging.

• Stabilizes the tub during spin by absorbing and controlling movement
• Reduces vibration and cabinet noise for smoother operation
• Helps the washer reach and maintain proper spin speed
• Worn shocks can cause shaking, banging, or walking during spin

• Disconnect power and water; use gloves and protect the floor.
• Access from the front or rear depending on model; remove panels as needed.
• Support the tub, then remove fasteners at both ends; install the new damper in the same orientation and tighten securely.
• Reassemble, level the washer, and run a test spin to check for vibration.

This inner tub hub connects the washer's inner drum to the drive assembly, providing a secure rotational link so the drum can spin properly. Replacing a damaged hub restores drum stability and reduces noise or wobbling. What it does:

• Secures the inner tub to the drive shaft so the drum turns with the motor
• Prevents excessive movement, vibration, and scraping noises caused by a worn or broken hub
• Helps correct spin-related issues like uneven spinning or the drum not engaging
• Works with the tub assembly and other drive components to maintain proper drum alignment

• One inner tub hub

• Disconnect power and water supply, and fully drain the washer before starting
• Replacement generally requires removing the outer tub/inner tub assembly and transferring seals or gaskets as needed
• Use proper tools and follow OEM service instructions
• Inspect surrounding components (seals, bearings, suspension) and replace if worn to prevent repeat failure

This drum spider is the rear support that attaches the washer's inner drum to the drive assembly, restoring stable spinning and reducing wobble, banging and vibration caused by a cracked or corroded support. What it does:

• Holds and centers the inner drum and transmits motor torque to the tub during spin cycles.
• Worn or broken spiders commonly cause loud banging, heavy vibration, or wobbling during spin.
• A failed spider can lead to uneven spinning and accelerate bearing or seal wear.
• Replacing the spider restores proper drum alignment and helps prevent further drivetrain damage.

• 1 drum spider

• Disconnect power and turn off water; drain the washer before beginning repairs.
• Replacement requires partial disassembly (removal of the outer/front panel and drum); follow for step-by-step instructions.
• Inspect tub bearings, seals and mounting hardware while the hub and shaft are exposed; replace any worn components to avoid repeat failure.

This rear tub spider is the cast support that secures the washer drum to the drive shaft and keeps the drum centered during spin cycles. It restores drum stability and helps stop excessive wobble and noise. What it does:

• Supports and centers the outer/inner wash drum on the drive shaft
• Transfers motor torque to the drum so the tub can spin properly
• A worn or cracked spider can cause loud vibration, grinding noises, or a drum that wobbles or rubs
• Replacing a corroded or broken spider prevents further damage to the tub and drive components

• One rear drum spider assembly

• Disconnect power and water before beginning; this repair requires disassembly of the washer cabinet and drum
• Inspect bearings, seals, and fasteners while the tub is apart — these parts are often serviced at the same time
• Use appropriate tools and follow OEM torque specs for reassembly
• Do not operate the washer with a damaged spider — it can cause further component failure