Maytag Cooktop Knob, Dial & Button

This shaft-bit generator is a replacement drive shaft component that transfers motor rotation to the appliance's moving assemblies, restoring proper mechanical motion and reducing noise from damaged or worn shaft parts. What it does:

• Transfers rotary motion from the motor to the driven components for normal operation
• Helps maintain alignment and smooth rotation of connected parts
• Worn or broken units can cause grinding, rattling, or loss of movement
• Replacing a failed shaft can stop intermittent operation and restore reliable performance

• High-level replacement only: remove power before accessing internal assemblies
• Follow appliance-specific disassembly steps; secure panels and wiring before removing the old shaft
• Inspect adjacent bearings, seals, and mounting hardware; replace any damaged items

The Knob is an OEM part for Whirlpool cooktops. It is used to control the settings of the appliance, such as the temperature and cooking modes, by turning the control shaft.

Over time, knobs can wear out or become damaged due to frequent use, accidental impact, or exposure to heat. A faulty knob can make it difficult to adjust the appliance settings accurately.

Symptoms of a bad knob include:

• Difficulty turning the knob
• Knob slipping or not staying in place
• Cracks or breaks in the knob
• Inaccurate setting adjustments

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This thermostat knob is the control dial that lets you set temperature or cycle settings on compatible Whirlpool appliances. It restores a secure grip and clear position reference so you can select settings easily. What it does

• Replaces a missing, cracked, or stripped thermostat/control knob
• Provides a tactile grip and visible indicator for accurate temperature or cycle selection
• Helps resolve issues where the control is hard to turn or slips on the shaft
• Fits on the appliance's thermostat/control shaft to restore normal operation

• Disconnect power to the appliance before servicing to avoid electrical shock
• Pull the old knob straight off the control shaft; align the new knob's splines with the shaft and push on firmly
• If the knob is tight or stuck, use a non-marring pry tool and work gently to avoid damaging the control panel
• If the shaft or underlying control is damaged, replace the control assembly rather than forcing the knob

Color: black. It measures about 2 inches in diameter.

Control knob that replaces a damaged or missing range control knob, restoring safe, reliable selection of heat settings. Provides secure grip and positive detents for accurate temperature adjustment on electric range controls. What it does:

• Fits onto the control shaft to select heat levels for electric surface burners or range controls.
• Replaces cracked, stripped, loose, or missing knobs that won't turn or slip on the shaft.
• Restores clear tactile stops and improves ease of setting burner or oven heat.
• Helps eliminate unsafe or imprecise temperature control caused by a compromised knob.

• Disconnect power to the appliance before servicing to avoid shock or injury.
• Pull the old knob straight off the control shaft; align splines and push the new knob on until fully seated.
• If the knob does not fit or the shaft is damaged, do not force the part—inspect and replace the underlying switch or shaft assembly if needed.
• Restore power and verify correct operation of all control settings after installation.

This replacement gas control knob restores positive, easy control of a range burner valve so you can adjust flame settings and operate the burner smoothly. Simple swap for a worn, stripped, or missing knob. What it does:

• Turns the burner valve to set flame height and turn the burner on/off
• Replaces cracked, stripped, loose, or missing knobs that slip on the valve stem
• Restores tactile, indexed control for accurate heat adjustments
• Helps eliminate spinning or wobbling while you operate the burner

• Always shut off the appliance power and gas supply before servicing.
• Most installs are push-on: pull the old knob straight off the valve stem and align the new knob's splines, then push until seated.
• If the knob won't seat or the valve stem is damaged, stop and inspect the valve; do not force the knob.

This control knob replaces a worn or missing dial so you can reliably select settings on your appliance. Restore smooth, positive control and a like-new look when an old knob cracks, strips, wobbles, or falls off.

• Attaches to the control shaft so you can choose functions, temperatures, or speeds
• Provides a secure grip for accurate adjustments
• Typical symptoms include a cracked or missing knob, loose or wobbly feel, spinning without engaging, or difficulty turning to Off
• Direct replacement designed to fit the original control stem on compatible models

• Turn the appliance off and allow any hot surfaces to cool
• Pull the old knob straight off the control shaft; avoid prying against the console
• Align the new knob with the shaft and press straight on until fully seated
• Test operation to ensure the pointer aligns with Off and the control engages properly

This replacement control knob restores a worn or broken stove/oven control interface so you can set temperatures and heat levels accurately. It fits onto the appliance's control shaft for reliable operation. What it does

• Replaces a damaged, cracked, or missing control knob so settings can be changed easily.
• Engages the control shaft spline to select oven/range heat or function positions.
• Helps eliminate slipping or loose-feel when turning the control.
• Appropriate when the original knob is stripped, hard to grip, or will not stay in place.

• Disconnect power to the appliance (and shut off gas if applicable) before servicing.
• Align the knob with the splined control shaft and push straight on until fully seated; do not force.
• If the shaft spline is damaged or the new knob does not fit securely, the control/switch may need replacement.
• Use basic hand tools only; for any electrical or gas-related repairs.

This control knob replaces a worn, cracked, or missing round knob used to select settings on ranges and ovens. It restores a secure, easy-to-grip interface so you can accurately set temperature and cooking functions. What it does:

• Fits onto the appliance control shaft so you can turn and select heat or function settings
• Provides a firm grip and clear pointer for accurate adjustments
• Restores smooth on/off and setting changes when the original knob is loose, stripped, or broken
• Helps prevent accidental setting changes from a missing or damaged knob

• Disconnect power to the appliance (unplug or switch off circuit breaker) before starting
• Pull the old knob straight off the control shaft; align the new knob with spline and push on until seated
• Do not force or hammer the knob onto the shaft; verify the pointer aligns with the control indicator

This is a replacement white gas control knob that restores manual burner control and a finished look to the cooktop. Easy-to-grip design lets you set flame level precisely for safe, consistent cooking. What it does:

• Fits onto the range valve stem to turn gas burners on and off and adjust flame intensity
• Replaces cracked, melted, faded, or missing knobs that prevent proper control
• Helps stop accidental gas flow when a knob is stuck, damaged, or slipping on the stem
• Restores a uniform appearance to the cooktop when original knobs are worn

• One white gas control knob

• Turn off all appliance power and gas supply before removing or installing the knob
• Pull old knob straight off the valve stem; align new knob spline and push on until seated
• If knob is tight or won't seat, inspect valve stem for debris or damage; do not force
• If you smell gas or suspect a leak after installation, stop use.

This replacement control knob fits gas cooktops and restores intuitive control of burner flame settings for safe, consistent cooking. Made to match the OEM fit and feel for smooth, reliable operation. What it does:

• Replaces a cracked, stripped, or missing burner control knob so you can select low-to-high flame settings.
• Allows proper engagement with the valve stem splines for accurate temperature control.
• Helps stop slipping, wobbling, or a knob that won't turn or stay set.
• Restores a complete, easy-to-grip control surface for safer burner adjustments.

• One control knob for a gas cooktop valve stem.

• Turn off the cooktop and gas supply and ensure all surfaces and burners are cool before installing.
• Align the knob splines with the valve stem and push firmly until fully seated; do not force if it won't align.
• If you smell gas, stop and ventilate the area; do not install.

This replacement control knob restores a worn, broken, or missing appliance control for reliable selection of settings. It offers a direct-fit replacement to make dials easy to turn and read again. What it does:

• Replaces a damaged or missing control knob used to select cycle, temperature, or setting
• Provides a secure grip so the selector shaft turns smoothly
• Helps eliminate slipping, cracking, or a knob that spins without engaging
• Restores user control and improves safe, accurate setting selection

• Remove power to the appliance before servicing to avoid electrical shock
• Pull off the old knob; push new knob onto the selector shaft until it seats
• If knob does not fit, do not force onto a mismatched shaft