Maytag Cooktop Knob, Dial & Button

Color: Stainless

This metal gas control knob replaces a damaged or worn stove/range knob to restore a secure grip and reliable control over burner settings. Easy to use and styled to match original factory controls. What it does:

• Allows safe selection of gas burner heat settings by turning the valve shaft
• Restores a firm, non-slip surface when an existing knob is cracked, stripped, or loose
• Helps resolve issues where the knob won't turn or won't stay set at the chosen flame level
• Matches original fit and feel for straightforward operation

• Turn off the appliance and shut off gas supply before servicing
• Typically installs by aligning on the valve shaft and pushing into place; no special tools required
• If knob does not seat correctly, check shaft for debris or a damaged splined insert

This control knob replaces a worn, cracked, or missing round knob used to select settings on ranges and ovens. It restores a secure, easy-to-grip interface so you can accurately set temperature and cooking functions. What it does:

• Fits onto the appliance control shaft so you can turn and select heat or function settings
• Provides a firm grip and clear pointer for accurate adjustments
• Restores smooth on/off and setting changes when the original knob is loose, stripped, or broken
• Helps prevent accidental setting changes from a missing or damaged knob

• Disconnect power to the appliance (unplug or switch off circuit breaker) before starting
• Pull the old knob straight off the control shaft; align the new knob with spline and push on until seated
• Do not force or hammer the knob onto the shaft; verify the pointer aligns with the control indicator

One knob per each package. Please order additional knobs if needed.

This bezel knob replaces a worn, cracked or missing control knob bezel to restore a clean finished look and reliable control feel. It provides the tactile grip needed to select settings easily. What it does:

• Covers and protects the control shaft while providing a gripped surface for turning and selection
• Replaces cracked, faded or broken bezels that make controls hard to use or look worn
• Restores proper alignment and tactile feedback for accurate setting selection
• Matches the original black finish for a consistent appearance

• Always disconnect power (and gas when applicable) before servicing controls.
• Most installs simply pull the old bezel off and push the new one onto the control shaft—align splines before seating.
• If the control shaft or switch is damaged or loose, replace the underlying control assembly rather than forcing the knob.

Color: Black

This replacement control knob restores a worn, broken, or missing appliance control for reliable selection of settings. It offers a direct-fit replacement to make dials easy to turn and read again. What it does:

• Replaces a damaged or missing control knob used to select cycle, temperature, or setting
• Provides a secure grip so the selector shaft turns smoothly
• Helps eliminate slipping, cracking, or a knob that spins without engaging
• Restores user control and improves safe, accurate setting selection

• Remove power to the appliance before servicing to avoid electrical shock
• Pull off the old knob; push new knob onto the selector shaft until it seats
• If knob does not fit, do not force onto a mismatched shaft

This control knob replaces a worn or broken appliance control knob to restore safe, easy adjustment of settings. Its simple fit and grip make it easy to use for regular adjustments on compatible units. What it does:

• Provides a secure, tactile interface for selecting oven/range or appliance settings
• Replaces cracked, stripped, or missing knobs that prevent proper control
• Restores accurate pointer alignment for clear setting selection
• Helps eliminate slipping or loose operation caused by damaged knobs

• One control knob

• Pull off the old knob straight out; push the new knob onto the shaft until it seats
• Unplug the appliance or shut off power before servicing electrical controls

This burner knob is the user control for turning range or cooktop burners on and off and adjusting flame/heat settings. It restores safe, tactile control when original knobs are worn, cracked, or missing. What it does:

• Provides a grip surface and interface to rotate the valve or switch for burner heat selection
• Replaces worn, stripped, or damaged knobs that prevent smooth rotation or accurate setting
• Helps stop accidental heat changes caused by loose or broken controls
• Fits on standard splined valve stems used on many Whirlpool ranges and cooktops

• Disconnect power to the appliance and shut off gas before servicing
• Pull off the old knob straight from the valve stem; align splines and push the new knob onto the stem until fully seated
• Do not force the knob; if it does not slide on easily, verify correct orientation and spline match

This square burner control knob replaces a damaged or missing range/stovetop control knob, restoring secure grip and reliable temperature control for your burner. It matches the OEM shape and spline for a proper fit. What it does:

• Fits onto the burner control shaft to let you set and adjust flame/heat levels
• Replaces cracked, melted, loose, or missing knobs that are hard to turn
• Restores tactile control so settings click or stop at detents as intended
• Helps prevent accidental shaft access when the original knob is broken

• Turn off power to the appliance (and gas supply for gas range/stovetops) before servicing.
• Pull the old knob straight off the control shaft; align the knob spline and push the new knob on until seated.
• If knob is tight or stuck, gently wiggle while pulling; do not pry with metal tools.
• If control shaft or retaining clip is damaged, replace that component before installing the knob.

This replacement infinite control knob lets you precisely adjust the heat level on an electric cooktop or range surface element. It restores a secure grip and clear pointer for accurate temperature control during cooking. What it does:

• Fits onto an infinite (infinite-tap) surface element control shaft to select heat settings
• Provides a clear pointer for accurate selection of low-to-high settings
• Replaces worn, cracked, or stripped knobs that slip or won't turn
• Helps stop intermittent or unreliable control caused by a damaged knob

• Remove power to the appliance before servicing for safety
• Pull off the old knob straight from the control shaft; push the new knob onto the shaft until secure
• Confirm proper fit and full range of motion before restoring power

Replacement control knob that restores reliable operation and provides a secure grip for selecting settings. Replaces cracked, worn or stripped knobs so controls turn smoothly and selection is accurate. What it does:

• Provides a firm, indexed grip for turning temperature, burner or function controls.
• Replaces cracked, broken or cosmetically damaged knobs.
• Restores function when the knob slips on the splined shaft or the indicator is missing.
• Helps prevent intermittent or imprecise control selection caused by worn knobs.

• Disconnect power (unplug or switch off breaker) before servicing the appliance.
• Pull the old knob straight off the control shaft; align the new knob's spline with the shaft and push firmly until seated.
• If the knob does not seat easily, check for debris or correct spline orientation—do not force excessively.
• No special tools are typically required.

Color: Stainless

This replacement control knob restores a secure grip and clear pointer for selecting heat and function settings on compatible Whirlpool appliances. It provides a precise, easy-to-read control surface so you can operate your appliance confidently. What it does:

• Replaces a worn, cracked, or missing control knob to restore manual control
• Fits on standard splined control shafts to select temperature or function positions
• Helps resolve symptoms like loose knob movement, slipping on the shaft, or illegible setting indication
• Matches OEM shape for correct fit and tactile feedback

• Pull off the old knob by hand; align the splines and push the new knob fully onto the shaft until it seats
• If knob is tight or hard to remove, power off the appliance and before using tools
• Do not overtighten or force onto the shaft; avoid using excessive heat or solvents
• If electrical access behind the panel is required, disconnect power first and follow all safety guidelines

This genuine-style control knob restores safe, confident control of a stove or oven function. It replaces a cracked, faded, loose, or missing knob so you can set temperature or burner levels accurately and easily. What it does:

• Replaces a damaged or missing control knob so you can turn burner or oven controls smoothly.
• Stops slipping or wobbling that prevents accurate setting selection.
• Restores the visible indicator for setting positions so you can confirm selections at a glance.
• Useful when the original knob is cracked, melted, discolored, or the grip is worn.

• One control knob.

• Disconnect power to the appliance or switch off the gas/electric supply before servicing.
• Most control knobs are push-fit; pull straight off the control shaft and press the new knob onto the splined shaft until fully seated.
• Do not force or hammer the knob onto the shaft; verify alignment of the indicator with the control setting.