Maytag Range Burner & Related Parts

The Regulator is an OEM replacement part for Whirlpool gas ranges. It regulates the flow of gas from the supply line to the burners, ensuring safe and efficient operation of your range. It maintains a consistent gas pressure, allowing for accurate and controlled heat distribution during cooking.

A bad pressure regulator can occur due to wear and tear, clogging, or damage to the internal components. If you notice symptoms such as uneven flame, difficulty in igniting the burners, or gas leaks, it may be time to replace the pressure regulator.

Symptoms of a bad gas pressure regulator include:

• Uneven flame
• Difficulty in igniting burners
• Gas leaks

This Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This conversion kit provides the orifices and instructions needed to convert a compatible gas range/oven from natural gas to liquid propane, restoring proper fuel flow and safe burner operation after a fuel-type change. What it does:

• Replaces factory natural-gas orifices with LP orifices sized for propane fuel
• Helps restore correct flame height and even heating when switching to LP
• Addresses weak or irregular flames that occur after changing fuel types
• Ensures burners receive the proper fuel jetting for safe LP operation

• Installation should follow OEM instructions exactly
• Turn off gas supply and electrical power before beginning work
• Use proper leak testing after installation and before returning the appliance to service
• Regulator adjustment or replacement may be required per OEM service instructions

The burner base is the metal burner head that supports the burner cap and directs the cooktop flame. Replacing a damaged burner base helps restore steady ignition and more even heat for everyday cooking. What it does:

• Provides the mounting surface and gas-port pattern for a surface burner and accepts the burner cap.
• Directs the flame for consistent heat across cookware.
• Common symptoms of a failing burner base: uneven or weak flame, burner won't light, visible corrosion or physical damage.
• Can cause repeated ignition attempts or poor heating when cracked, bent, or clogged.

• Turn off electrical power and the gas supply before servicing the range.
• Remove burner grates and caps to access the base; depending on model the base may lift out or be secured with fasteners.
• Inspect the igniter and surrounding components while replacing the base; reassemble and test the burner for proper ignition and flame pattern.

This surface burner head replaces a worn or clogged top burner on gas ranges and cooktops, restoring a steady, even flame and reliable ignition so your burners heat consistently for everyday cooking.

• Mixes gas and air to produce the cooking flame
• Works with the igniter to light the burner
• Directs flame evenly around cookware
• Common symptoms: weak or uneven flame, yellow tipping, delayed ignition or no light, soot, or popping noises

• Disconnect electrical power and shut off the gas; allow the cooktop to cool completely
• Remove grate and burner cap; take out the mounting screw(s) and lift off the old burner head
• Align the new head with the igniter and orifice holder; reinstall screw(s) and the cap
• Restore gas and power; test ignition and verify a clean, even flame

• Many models use different burners by position and output; match the exact part number for the correct location
• Clear clogged ports with a soft brush or compressed air—do not enlarge ports with pins or drill bits

Color: Grey

The Valve-Gas is an OEM part for Whirlpool gas cooktops. This valve is located underneath the cooktop and is responsible for controlling the flow of gas to each burner. 

Symptoms of a bad gas valve can include:

• Inability to ignite or adjust certain burner flames
• Gas leaks or smells around the valve area 
• Intermittent or irregular flame levels
• Yellow flames that pose a safety risk

Over time and with heavy usage, components inside the valve can wear down affecting proper gas regulation. 

Compatible models also include KitchenAid, Jenn-Air, Magic Chef, Admiral, and some Kenmore units. 

This burner cap fits over a gas cooktop's surface burner to help direct flame for even heating and protect the burner head. It restores proper burner appearance and helps maintain efficient flame pattern for cooking. What it does:

• Covers and protects the gas burner head from spills and debris
• Shapes and stabilizes the burner flame for consistent heat distribution
• Helps prevent flame disturbance that can cause uneven cooking or clicking
• Restores a finished look to the cooktop surface

• 1 burner cap

• Turn off gas supply and ensure all surfaces are cool before handling
• Remove loose debris and set the cap on the burner head so it seats evenly
• If cap is warped or does not sit flat, inspect burner head for damage or debris
• Use only manufacturer-recommended parts and follow your appliance's service instructions

This burner base holds the surface burner assembly in place and helps route gas to the burner for safe ignition. It restores proper burner positioning so the cooktop lights and heats reliably. What it does

• Supports and locates the surface burner head and cap for correct flame formation
• Directs gas flow from the valve to the burner ports for consistent ignition
• Commonly replaced if the burner sits unevenly, won't light reliably, or flame is irregular
• Works with associated burner components to ensure normal operation

• Turn off the appliance gas supply and electrical power before beginning work
• Verify correct fit and orientation; seat the base fully before reinstalling burner head and cap
• Use basic hand tools; tighten fasteners securely but avoid over-torquing

Orifice spud secures the burner orifice to the gas valve/manifold and directs fuel to the burner for proper flame performance. Replaces a damaged or corroded spud to help restore correct gas flow at the burner. What it does:

• Holds the burner orifice in place and channels gas from the valve to the burner.
• Helps maintain consistent flame size for even heating and cooking.
• Commonly used when a burner has weak, uneven, or intermittent flame performance.
• Replace if the spud is cracked, corroded, damaged, or leaking.

• Turn off the appliance's gas supply and disconnect power before beginning any repairs.
• Remove burner components per the service manual and install the spud in the same orientation as the original.
• Hand-start threads, then snug with the appropriate wrench—do not overtighten.
• After installation, check fittings for leaks with an approved leak-detection method; if you smell gas or suspect a leak, stop.

The Surface Burner Orifice Holder is an OEM part specially designed for Whirlpool gas ranges and cooktops. This part holds and positions the burner orifice above the surface burner, facilitating the mixture of gas and air required for combustion. 

Symptoms of a bad orifice holder include:

• Yellow or incomplete burner flames  
• Flames not remaining centered on the burner surface
• Burners that will not light or stay lit
• Gas leaks detected around the burner area

This is also compatible with Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and Roper gas ranges and cooktops. 

This saddle-style gas valve controls gas flow to the appliance, letting technicians create a safe, serviceable gas connection. It's used where a saddle/tap-style inlet is required for supplying natural gas to the unit. What it does:

• Provides a saddle-mounted gas shutoff and inlet for an appliance connection
• Restores gas flow when a damaged or leaking saddle valve prevents operation
• Commonly used when a service replacement or rework of the appliance gas inlet is needed
• Helps isolate the appliance gas supply for repair or maintenance

• Turn off the home gas supply and relieve downstream pressure before starting work
• Installation must follow OEM instructions and local codes; use appropriate fittings and sealants for gas service
• Check all connections for leaks with a gas-safe leak detector or soapy-water test after installation

This bake burner is the oven's gas combustion component that produces the heat for baking and roasting. It restores reliable oven heating so you can cook and bake at the proper temperatures. What it does

• Provides the primary gas flame for the oven's bake function.
• Helps the oven reach and maintain baking temperatures.
• Resolves symptoms like no oven heat, weak or erratic bake flame, or oven not maintaining temperature.
• Works with the oven's ignition system and safety controls to light and sustain the burner.

• One bake burner assembly.

• Turn off gas supply and power to the appliance before beginning any work.
• Inspect ignition and burner ports for debris; clean or replace as needed for proper lighting.
• Follow the oven manufacturer's service instructions and local codes when reconnecting gas lines.

This orifice directs a controlled flow of gas to the appliance burner, helping restore the correct flame size for reliable heating and ignition. Use when burner performance is weak or inconsistent to help return proper operation. What it does

• Restricts and meters gas flow to the burner for consistent flame characteristics
• Helps the burner ignite and maintain a steady flame when sized correctly
• Commonly replaces worn, clogged, or damaged orifices that cause low or irregular flames
• Resolves symptoms like weak heat, slow ignition, or uneven burner performance

• Turn off gas supply and electrical power before servicing; follow all safety precautions
• Inspect surrounding burner and sealing surfaces for debris or damage before installation
• Tighten securely but avoid overtightening; use proper fittings and thread sealant rated for gas if required

Color: Grey

This broil burner supplies the top-down heat for gas ovens so you can brown and crisp foods under the broiler. It replaces a worn or damaged burner to restore even broiling performance and reliable ignition. What it does:

• Produces the concentrated heat needed for broiling and browning foods
• Directs gas flow and flame across the oven top for consistent broil results
• Commonly replaced when the broiler won't ignite, flame is weak, or cooking is uneven
• Works with the oven's gas valve and igniter to provide safe, reliable operation

• Turn off the gas supply and electrical power before starting work
• Only install if the part number and burner shape match your oven
• Inspect and replace any damaged gaskets or mounting hardware as needed