Maytag Range Knob, Dial & Button

This surface burner control knob restores smooth, precise heat selection on your cooktop or range. Replace a cracked, loose, or missing knob to regain clear settings and confident control with a clean, factory look.

• Attaches to the burner valve/infinite switch shaft to turn the surface burner on/off and adjust heat
• Resolves issues like slipping, wobbling, or a knob that won't turn or stay on the stem
• Helpful when indicator markings are worn or hard to read
• Returns the front panel to a clean, factory appearance with the correct fit

• Ensure all controls are off and the cooking surface is cool before starting
• Pull the old knob straight off the stem; do not pry against the panel
• Align the new knob with the stem and press firmly until fully seated
• Turn through all settings to verify smooth, accurate operation

Color: Biscuit. For white use WP98006102. For black use WP98006100. Price per each. Order as needed.

Replacement control knob that restores user control of the appliance's front-panel settings. It provides a positive grip for selecting cycles, temperatures, or timers so you can operate the appliance safely and accurately. What it does

• Turns the control shaft to select cycles, temperatures, or timer settings.
• Replaces cracked, stripped, loose, or missing knobs that are hard to grip or won't turn.
• Restores tactile feedback for reliable selection of settings.

• Most installs are straightforward—align the knob splines with the control shaft and press until fully seated; some models may use a retaining clip.
• Always disconnect power to the appliance before servicing controls to avoid shock or injury.
• Inspect the control shaft and retaining clip for damage; replace damaged components before installing the new knob.

A replacement control knob that restores safe, positive control of a stove or range surface burner. This easy-to-install knob gives a solid grip for selecting heat settings and replaces a missing, worn or broken knob. What it does

• Fits over the range control shaft to select surface burner heat settings
• Provides a secure grip for smooth turning and accurate selection
• Replaces cracked, stripped, loose or missing knobs that prevent normal operation
• Helps restore proper detents/stops so settings hold when selected

• Turn controls to OFF and disconnect power (or shut off gas) before replacing the knob
• Pull the old knob straight off the control shaft; align splines and push the new knob fully onto the shaft
• Do not force a knob onto a damaged or bent shaft—inspect the control shaft for damage first

This control knob replaces a worn, cracked, or stripped stove/oven control interface to restore positive grip and accurate setting selection. It gives a simple, direct replacement to get appliance controls turning smoothly again. What it does:

• Fits onto splined control shafts to allow safe, tactile selection of heat and cycle settings
• Replaces knobs that are loose, cracked, melted, or missing
• Prevents slipping and improves accuracy when changing settings
• Restores a secure, ergonomic surface for manual control

• Disconnect power to the appliance before removing or installing the knob
• Pull the old knob straight off the control shaft; align the splines and push the new knob on until fully seated
• Do not force or hammer the knob onto the shaft; check fit and function before restoring power
• If the control shaft is damaged or the knob does not seat properly, replace the underlying control.

This is a replacement thermostat knob that restores safe, easy temperature selection on range and oven controls. The clear indicator and molded grip give reliable adjustment for everyday cooking and baking. What it does:

• Fits onto the thermostat/stove control shaft to set oven or burner temperature
• Replaces cracked, stripped, or missing knobs that are hard to turn or don't stay set
• Provides a visible pointer for accurate temperature selection
• Restores user control when the original knob is worn or damaged

• One black thermostat knob

• Turn power/gas to the appliance off and allow surfaces to cool before installing
• Pull the old knob straight off the control shaft
• Align the knob's splines with the control shaft and push on until fully seated

This replacement igniter knob is the user control that engages the spark igniter and gas valve on compatible gas ranges, restoring safe, reliable burner ignition and user control when the original knob is damaged or worn. What it does:

• Replaces a worn, cracked, or stripped igniter/control knob so you can easily turn burners on and off.
• Engages the burner spark mechanism when rotated or pressed (depending on range design).
• Helps ensure proper alignment with the range valve splines for predictable control response.
• Addresses symptoms like a loose, slipping, or broken knob that won't turn the burner valve or activate ignition.

• One replacement knob

• Disconnect power to the appliance and shut off the gas supply before attempting service.
• Ensure splines on the shaft and inside the knob are clean and undamaged; align knob to the shaft and slide fully onto the splines.
• Do not force the knob onto a damaged shaft; forcing can break the knob or valve stem.
• If the burner does not ignite after installation, the igniter or valve assembly may need inspection—this knob only replaces the user control.

Color: White. Measures about 2 inches in diameter.

Color: Stainless

Color: Black

The Knob is an OEM part for Whirlpool ranges. As the interface between user and appliance, knobs allow for temperature and function control.  

Causes of bad knobs are typically normal wear over time, breakage from impact or over-tightening, or issues with the connecting shaft or gear assembly.

Symptoms of faulty knobs can include:

• Loose, wobbly or difficult to turn motions
• Knobs detached completely from shafts
• Knobs stuck or unable to fully rotate through settings

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This replacement control knob restores a secure grip and accurate selection of settings on your appliance's control shaft. Swap a cracked, stripped, or missing knob to keep everyday operation smooth, precise, and safe.

• Attaches to the control shaft to select temperature, cycle, or burner settings
• Replaces knobs that are cracked, stripped, loose, or missing
• Helps resolve issues like a knob spinning freely, difficulty turning, or inability to choose a setting
• Restores normal feel and alignment when turning the control

• Unplug the appliance and, if applicable, shut off gas before servicing
• Pull the old knob straight off the control shaft; avoid prying on the stem
• Align the new knob with the shaft and press firmly until fully seated
• Test operation to ensure smooth turning and proper engagement

This replacement top burner knob restores smooth, reliable control of your cooktop or range surface burner. Use it to turn the burner on/off and adjust heat when the original knob is cracked, stripped, or missing.

• Mounts on the burner valve or switch stem to control flame/heat level
• Replaces knobs that are broken, loose, or no longer engage the stem
• Helps resolve issues like spinning freely, falling off, or hard-to-set heat
• Restores precise burner control and a clean, finished look

• Allow the appliance to cool; disconnect power and shut off gas before servicing
• Pull the old knob straight off the stem; do not pry on the valve stem
• Align the new knob with the stem and press straight on until fully seated
• The knob markings match the correct burner position before use

This white control knob restores a clean look and reliable feel to your range's user controls. Replace a cracked, stripped, or missing knob so you can confidently select heat and function settings at the control shaft. What it does:

• Attaches to the control shaft to select heat or function settings
• Provides a pointer that aligns with panel markings for accurate selection
• Restores smooth turning when the old knob is cracked, stripped, loose, melted, or missing
• Helps ensure on/off and level adjustments engage properly

• 1 white control knob

• Pull the old knob straight off the shaft; avoid prying against the control panel
• Align the flat/D orientation of the new knob with the shaft and press straight on until fully seated
• Disconnect power and, if applicable, shut off gas before servicing any controls behind the knob
• Match part numbers to the correct location

Color: Stainless

This metal gas control knob replaces a damaged or worn stove/range knob to restore a secure grip and reliable control over burner settings. Easy to use and styled to match original factory controls. What it does:

• Allows safe selection of gas burner heat settings by turning the valve shaft
• Restores a firm, non-slip surface when an existing knob is cracked, stripped, or loose
• Helps resolve issues where the knob won't turn or won't stay set at the chosen flame level
• Matches original fit and feel for straightforward operation

• Turn off the appliance and shut off gas supply before servicing
• Typically installs by aligning on the valve shaft and pushing into place; no special tools required
• If knob does not seat correctly, check shaft for debris or a damaged splined insert

This white valve knob replaces a worn, cracked or missing control knob to restore secure grip and precise control of the associated valve or control shaft. It provides a like-for-like cosmetic and functional replacement. What it does:

• Fits over the valve/control shaft to allow manual on/off or position control.
• Restores a firm grip for accurate adjustments when the original knob is damaged or lost.
• Prevents slipping and improves user safety compared with a broken knob.
• Compatible with the OEM shaft interface for a secure fit.

• One white valve knob.

• Turn off and unplug the appliance, and shut off any related gas or water supply before starting.
• Remove the old knob by pulling straight off the shaft; press the new knob onto the shaft until fully seated.
• If the knob does not seat easily, verify shaft type and orientation—do not force or modify the shaft.