Maytag Range Switch

Genuine Whirlpool part

Maytag Door Switch (Door Latch Switch)

By: Whirlpool

Part Number: 74008703

This door switch detects when the appliance door is closed and signals the control so the unit can start or run. Replacing a faulty switch restores proper door-sensing and safe operation. What it does:

Detects door open/closed status and sends the signal to the appliance control
Prevents the unit from starting or running if the door is open
Commonly linked to symptoms like the appliance not starting, not completing cycles, or lights/controls behaving incorrectly
Works as the safety interlock for door-dependent functions

What's included:

One door switch

Install notes:

Disconnect power before servicing to avoid shock or injury
Match connector style and mounting alignment to the original switch before final installation
Handle the switch and wiring gently to avoid damage to terminals or harnesses

Do-It-Yourself Stories from Customers like You Oven door would not close tight and light would stay on Debra P. • Clintonville , WI • June 01, 2015

Replaced the hinge and receiver. Read more

$67.95

Compare At:: $81.54
You Save:: $13.59

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Whirlpool part

Maytag Switch, Rocker (Bsq)

4.5 (4)

By: Whirlpool

Part Number: 74008765

Do-It-Yourself Stories from Customers like You My dual front element was burned out in middle (small size) & the switch to go from large to small had stopped working (melted) Mary C. • Mt Pleasant , PA • August 14, 2016

I ordered the parts on Wednesday and they arrived on Thursday! Wow, that was F-A-S-T !! With some help from my electrician in training son, we were able to swap out the dual element and new rocker switch in about 30 mins! Works perfectly!! Thank you Appliance Parts Pros!! Read more

$51.28

Compare At:: $61.02
You Save:: $9.74

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Whirlpool part

Maytag Infinite Switch (Surface Burner Control)

By: Whirlpool

Part Number: 74011070

This infinite switch restores variable heat control for an electric cooktop surface burner, letting the knob regulate element temperature smoothly. Replace a faulty switch to regain consistent burner power and control. What it does:

Regulates power to a cooktop surface heating element for variable heat settings
Commonly fails when a burner won't heat, stays off, or won't reach/select set heat levels
Can cause erratic heating or loss of click/response at certain knob settings
Works with the burner control knob to step power through multiple heat ranges

What's included: One infinite switch Install notes:

Disconnect power at the breaker before starting any repair to avoid shock
May require removal of the cooktop or control panel and the control knob for access
Match wiring connections and mounting orientation exactly; take a photo before disassembly
Test function with power restored only after panels and controls are safely reassembled

$83.73

Compare At:: $99.64
You Save:: $15.91

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Whirlpool part

Maytag Switch, Rocker

5.0 (2)

By: Whirlpool

Part Number: 7403P067-60

Color: Black

Do-It-Yourself Stories from Customers like You Oven would not heat up past 100 degrees and the light switch was broken Gary B. • Redondo Beach , CA • August 28, 2015

A new ignitor was installed, and a new light switch was installed Read more

$56.52

Compare At:: $67.26
You Save:: $10.74

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Whirlpool part

Maytag Rocker Switch (Ro)

By: Whirlpool

Part Number: 7403P985-60

This rocker switch is a direct-replacement control button that restores reliable on/off input for the appliance. It replaces a worn or broken front-panel switch so controls respond correctly during normal use. What it does:

Replaces a failed rocker/control switch used to send on/off or selection signals to the appliance's control circuitry
Restores consistent electrical contact when the original switch is cracked, stuck, or intermittently working
Commonly used when push/panel buttons no longer activate functions or display response is erratic
Simple, single-function mechanical switch — no programming or calibration required

What's included: One replacement rocker switch (RO) — exact item pictured. Install notes:

Disconnect power to the appliance before attempting any service to avoid shock or injury
Access may require removal of the control panel; keep screws and fasteners organized for reassembly
Verify switch orientation and wiring before final reassembly; match connectors to original terminals

$55.46

Compare At:: $66.55
You Save:: $11.09

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Whirlpool part

Maytag Light Switch (Oven/Range Light), 1 Pack

By: Whirlpool

Part Number: W11243424

This replacement light switch controls the oven/range interior light so you can safely check cooking progress without opening the door. Restores proper on/off function when the original switch fails or becomes intermittent. What it does:

Replaces the failed oven/range interior light switch to restore on/off control
Stops flickering or intermittent lighting caused by a worn switch
Allows the oven light to turn on for safe, clear viewing of food while cooking
Fits behind the control panel or light housing depending on model

What's included:

One replacement light switch

Install notes:

Turn off power to the appliance at the breaker or unplug before starting
Remove access panels or control housing to reach the switch; keep track of fasteners
Disconnect wiring connectors by gently pulling straight off; note wire locations before removal

$65.95

Compare At:: $78.48
You Save:: $12.53

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Whirlpool part

Maytag Infinite Switch (Top Burner Control)

5.0 (1)

By: Whirlpool

Part Number: W11122008

This infinite switch controls heat output to an electric range surface burner, restoring variable temperature control for cooking. Replacing a worn or faulty burner control brings back smooth, stepless power adjustment at the cooktop. What it does:

Regulates electrical power to a surface/top burner so you can set low-to-high heat levels.
Re-establishes variable temperature control when a burner is stuck high, stuck low, or won't heat.
Replaces a failing rotary control that clicks, won't change settings, or loses continuity.
Works with the cooktop wiring and mounting used by the original burner control.

What's included: One infinite switch. Install notes:

Disconnect power at the breaker before starting any repair to avoid electric shock.
Verify the replacement matches the old switch's terminals and mounting before installation.
Reconnect wiring securely and test the burner operation after restoring power.

Do-It-Yourself Stories from Customers like You Burner idn't work Glenn L. • Westbury , NM • January 23, 2017

Unscrewed the glass top and replaced the switch. Read more

$94.95