Maytag Wall Oven Parts

Called repairman who said he could not fix it, which I did not believe. Read about issue on line and confirmed the issue to be hinges when disassembled. Ordered, easy replacement, and door works perfect. Did not use backing plates, but likely not worth returning due to freight. Great service by your team. Read more

First check to see how many leads your switch has before ordering - I ordered before I took things apart, and got an incorrect 2 lead version when I needed a 3. On starting the repair, at first thought I might have to take apart console - but happily, no. After turning off power, just carefully pried the old switch out (putty knife to depress plastic clips above & below), pulled out gently (not much slack on wires) and removed the old wires by gently easing them off the broken switch with a... Read more

I replaced the thermostat and its control switch as it was not able to turn off. Read more

Replaced switch Read more

I attempted to diagnose the four thermostats/thermal switches in the microwave....two right behind the control panel, one on top of the cooking cabin, and one under a metal shroud above the magnetron. While checking continuity with a voltmeter, i questioned one of them behind the control panel and the one above the magnetron. I then noticed a burn mark on the plastic connector sleeve for the one above the magnetron. I took a scrap piece of 14 gage copper wire and beat the ends flat with a... Read more

Ordered the parts which the sales rep was extremely helpful courteous and knowledgeable. The order arrived within 3 working days. Very easy remove and replace. Job done! Extremely satisfied customer and now our go to vendor! Read more

So I ordered the burner and Ithe switch because I wasn't sure what part was defective. I pulled the oven out and I removed the 6 1/4 inch screws on each side of the glass top as well as the 2 Phillips head screws on the back, removing the 2 1/4 screws on the shield on the back gIves you easier access to them, then lifted the glass top up on the front to access the switch and burners. Make sure you turn the power off before beginning this process. When lifted up the wires connected to the... Read more

Changed the spark module electronic board. I ordered part # AP5999387 (W10860916) Read more

Could not level stove. Front leveling legs had pieces broken out where leg contacted floor. Back leveling legs were worn and did not stay at corrected height when stove returned to full weight on floor. Replaced both front and back leveling legs, and stove was able to be leveled. Also bought Touchup Paint for numerous nicks and scratches - color matched perfectly. Read more

Replaced damaged part Read more

Placed burners on. Read more

Removed back panel and top burner cover to replace thermostat Read more

I disassembled the top of the range and looked at the problem burner. It looked like there was a spark at all three other burners but not the problem burner. There was a visible spark at the connector between the wiring harness and the ceramic igniter but that spark wasn't making it up to the top of the igniter where it can light the burner. I ordered a new igniter for $19 and it was on my doorstep the next day. I replaced the part and now my wife thinks I am a genius. Don't tell her that... Read more

We ordered new knobs and a new burner unit which solved our problem even though our stove was purchased around 1987. Read more