Mcculloch Parts

Leaf blowers are noisy machines in general, but could be far louder if they were not fitted with mufflers. This is the part that catches the sound emitted by the engine and keeps pressure in the engine at a balanced level. When a blower seems to running at a level of noise that is far above normal or if it doesn't seem to run as powerfully as it should, it might be that the muffler needs to be replaced. This replacement blower muffler is designed for use on blowers made by Husqvarna, Poulan and Weed Eater. It will suppress the amount of noise exiting from the engine. This is an OEM replacement part that is made of metal and ships individually. Replacing it is not a very complex task, but will vary from model to model. It can often be managed with only a screwdriver.

This replacement part is a screw. It is a genuine replacement part made by Husqvarna. Normally screws are found in many different types of appliances. These parts are important in holding different pieces together so that the user is able to operate the machine effectively. A new screw might be needed if some parts of the appliance are loose or missing from place.Screws can become stripped over time with normal equipment use. If this is the case it is recommended that they be replaced. The repair for this screw is simple and will most likely require common household tools as well as pliers. This screw is made of durable metal made for long-lasting use. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is also a genuine OEM replacement part.

This part is a replacement screw. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a defective or misplaced screw in a variety of lawn equipment. This screw is a high-quality piece of standard hardware with multiple different uses. Screws are essential for securing parts of the equipment, but can easily become lost, stripped, or otherwise damaged. If screws are missing, it can affect the functionality of the equipment. A Phillips head or flat head screwdriver can be used to install this screw. It's important when working on or near any engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this screw, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this screw is suitable for use on several models of lawn equipment manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable metal and is sold individually.

This is a genuine OEM lawn and garden equipment screw that is used in various types of machines. It is a tapping screw that may have several applications depending on the exact equipment in question. A hex key screw is responsible for providing a secure hold for various components. It is made of durable metal, but also exposed to high heat and constant vibrations which can lead to wear, damage, or even breaking. The screw should always be replaced with an OEM replacement. This genuine OEM tapping screw is manufactured by Poulan. It is designed to be used in select outdoor power equipment units from the brand. It can also be used in compatible models from Paramount, Weed Eater, Jonsered, and Husqvarna. It fits trimmers, chain saws, and hedge trimmers from these brands. The tapping screw is sold individually and does not include any additional hardware or parts. A Torx screwdriver or hex key will be required to replace this tapping screw. Be sure to wear gloves when performing engine repairs and allow the machine to cool completely before starting work.

This screw is a genuine Husqvarna part, sold individually. This screw can be used as a replacement part in a chainsaw. The purpose of the screw in a chainsaw is to serve as a small fastening component within the internal mechanisms of the appliance. The screw in a chainsaw might need to be replaced if it is lost, misplaced, or stripped away over time from general wear and tear. If the screw is lost or misplaced, which is easy to do as it is a small part that can disappear without affecting the functionality of the appliance, the screw should be replaced by this genuine OEM replacement part. The same should occur if the screw has been damaged.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This screw is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, and Poulan Pro.

This spark plug is a genuine Husqvarna part, sold individually. This spark plug can be used as a replacement part for tillers, string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, and pole pruners.Spark plugs in outdoor appliances such as these might have to be replaced if they are not functioning as usual. If the ignition system is not working, if the spark plugs are not igniting in the first place, or if the spark plugs are igniting but the engine is not powering on, it is likely that the spark plugs are damaged and should be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This spark plug is compatible with the following outdoor appliance brands: Husqvarna, Stihl, Craftsman, Weed Eater, Toro, Cub Cadet, Ryobi, Homelite, Poulan, Wheel Horse, Tecumseh, Tanaka, Black Max, and Green Machine.

This chainsaw bar adjuster is a genuine replacement tool that can be used with select models of chainsaws. The purpose of the bar adjuster is to make it easy to adjust the chain bar to tighten the chain. The angular design of this tool makes it easy to tighten and loosen the bar to create the ideal tension in the chain. This bar is made of durable metal but it can still become worn, bent, or otherwise damaged with regular use. A new bar wrench will ensure that the chainsaw can always be adjusted as needed. This genuine OEM bar adjuster is manufactured by Husqvarna. It is designed as an exact replacement for the original tool and it is compatible with Craftsman, Poulan, Snapper, and Husqvarna chainsaws. There are over 150 models that can use this chainsaw bar wrench, which is made of premium durable metal material and sold as an individual unit. Never attempt to adjust a chainsaw bar or blade with anything but the right tool. This genuine part is a replacement for bar adjusters that have been lost, as well, and should be stored carefully out of the elements when not in use.

The genuine replacement primer bulb covers the primer base and plunger on specific leaf blower models. Before starting the leaf blower, the primer is pushed to allow fuel to flow into the carburetor to assist in a smooth engine start. It can also make starting the equipment easier after it has been sitting for a period of time. The bulb is made of plastic and exposed to the elements, so over time it can become cracked, worn, or even completely lost. Without it, the engine cannot be properly primed before operating and therefore will not run as well. Replacing the bulb with a genuine OEM model like this should be done as soon as possible. This OEM primer bulb is manufactured by Husqvarna and can be used for a variety of leaf blowers that are manufactured by the brand. This model is also compatible with Poulan, Craftsman, and Weed Eater products. The bulb is made of durable rubber and may require a screwdriver for replacement to assist in fitting the bulb into place. This unit is sold individually and does not include the primer base assembly or any hardware.

This exhaust gasket is a genuine Husqvarna part, sold individually. This exhaust gasket can be used as a replacement part in a chainsaw. The purpose of the exhaust gasket in a chainsaw is to seal off the area in and around the exhaust so that external materials so as dirt, debris, and pebbles cannot pass into the appliance.The exhaust gasket in a chainsaw might need to be replaced if it can no longer effectively seal off the area around the exhaust. This could occur if the exhaust gasket has been damaged or compromised from general wear and tear with long-term use or due to collision with a hard object. If this occurs, the exhaust gasket should be immediately replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This exhaust gasket is compatible with the following outdoor appliance brands: Husqvarna.

The clutch assembly is located in the clutch drum and connected to the drive shaft of the motor. This part is what allows the engine to idle without actually driving the cutter on lawn and garden equipment. The clutch is constantly engaged, so it can wear out over time and eventually need to be replaced. It may also become damaged in a direct impact or incident. If the clutch assembly fails, this could impact the ability of the engine to idle properly or even to remain running once it's started. This replacement part can offer an exact fit for compatible engines. This OEM clutch assembly is manufactured to high standards by Poulan and is designed to be compatible with various machines from Poulan, Weed Eater, Jonsered, and Husqvarna. The clutch assembly is a replacement part for various trimmers and pruners from the brands listed above. Replacing the clutch will require a wrench, screwdriver, pliers, and socket set. Be sure to cool the engine completely and wear gloves when doing repairs on lawn and garden equipment for safety.

This is a genuine outer bearing replacement for use on select models of outdoor lawn and garden equipment. The outer bearing is installed on the crankshaft and helps create a flexible joint for the various components to move against. This bearing is made of durable metal material, but over time it can become worn and damaged. It may also come loose or get lost in the process of other repairs. In any case, a faulty bearing will need an immediate and original replacement. Wear gloves and allow the engine to cool completely before beginning any repairs. Be sure to take the crankshaft components apart carefully to access the bearing so that they can be reassembled properly. Bearings should also be lubricated when installed.This is an OEM part that is manufactured to exact standards. It is made by Craftsman and can be used in machines from Weed Eater, Poulan, and Craftsman. This bearing can be used in compatible blowers, edgers, trimmers, pruners, and hedge trimmers. It is sold as an individual unit and there is no additional hardware included.

This is an OEM replacement chainsaw bar plate for select brands and models of chainsaws. The chainsaw bar plate is responsible for holding the chainsaw guide bar in place and providing a secure foundation to reduce vibrations, while also spacing the bar from the chassis. The plate itself can become loose over time, or can even become damaged and lead to things like oil leaks from a loose chain. If the bar plate is in disrepair or not functioning correctly, it should be replaced immediately. this genuine replacement part can provide an exact fit for compatible saws. This OEM bar plate is manufactured by Poulan and will fit a number of chainsaws from the brand Craftsman, as well as those from Husqvarna and Jonsered. This durable part is made from high-quality metal and can be replaced with only a few tools. The plate is sold individually as a single unit. Hardware is not included and will have to be purchased separately if it is required. Always wear gloves and disconnect the spark plug before beginning repairs on chainsaws.

This part can be used to replace a deteriorating or leaking oil pick-up in chainsaws. An oil pick-up is essential for a smooth-running piece of equipment, as it supplies oil to the engine. Over time, oil pick-ups can become worn, which can cause leaks and prevent the engine from receiving the necessary supply of oil to operate properly. This part is manufactured from high-quality, durable plastic and non-corrosive metal. This assembly pick-up oil tank is a genuine OEM replacement part that has been sourced directly from the manufacturer. This replacement assembly pick-up oil tank fits various different models of Husqvarna and Poulan chainsaws. Please note this part is sold individually.

The rear isolator spring is a genuine replacement part found in select models of chainsaws. This authentic part is made of durable metal and is responsible for providing tension between the chassis and rear handle to keep the unit operating properly. The spring could become worn over time, or it could become lost during other repairs. If this rear isolator spring is lost or damaged, it will need to be replaced with a genuine OEM model like this one before the unit will be safe to use. Pliers and an Allen wrench are to replace this part, which is sold individually and does not include any other parts or hardware. The rear isolator spring is manufactured to exact standards by Poulan and can be used in compatible models of chainsaws from Jonsered, Husqvarna, and Poulan. Users should wear gloves and allow the unit to cool completely, as well as to disengage the spark plug for safety when performing repairs on chainsaws.

This starter hub is a genuine Husqvarna part, sold individually. This starter hub can be used as a replacement part for chainsaws. The starter hub for a chainsaw is a component of the recoil starter mechanism; the starter rope is coiled around a pulley that is held in place by the tension of a spring, and that spring is attached to the starter hub. The function of the starter hub is to rotate the pawls of the flywheel such that the engine is activated.A starter hub might have to be replaced in the event that it suffers damage that impedes it from connecting to or facilitating the operation of the pawls of the flywheel. If the starter rope does not turn on the engine when pulled, this could be a sign of damage in the starter hub. The starter hub can suffer damage from general wear and tear or overuse, and if this is the case, it should be removed and replaced with this genuine OEM part before using the chainsaw again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This starter hub is compatible with the following brands: Husqvarna, Craftsman, and Poulan.