Mcculloch Parts

If your chainsaw won't start or the pull cord doesn't retract, the starter pulley may be damaged. This component helps engage the engine during startup.

Bar and chain not getting enough oil? This chainsaw oil pump assembly delivers proper lubrication to reduce friction and overheating during operation.

This rear handle is a genuine Husqvarna part, sold individually. This rear handle can be used as a replacement part for a chainsaw. A rear handle chainsaw can be used with one hand, whereas a top handle chainsaw must be guided with two hands.The rear handle of a chainsaw might have to be replaced in the event that the part has come loose, that the part does not function as usual as a steering grip, or that the part is damaged to the point that it cannot be repaired. If the rear handle has been torn, punctured, or eroded so it is rendered useless, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This rear handle is compatible with the following outdoor appliance brands: Husqvarna and Poulan.

This part is a replacement upper tube blower. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a faulty or damaged upper tube blower on a variety of leaf blower models. This particular upper tube blower is used with gas powered leaf blowers. This part connects the lower tube to the blower housing. No special tools are required to replace this part. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this upper tube blower, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this upper tube blower is suitable for use on several different models of leaf blowers manufactured by Husqvarna. This is a genuine part made of high-quality, durable materials and is sold individually.

This is a complete carburetor assembly designed for use on a snowblower engine. The carburetor mixes fuel and air in the correct ratio to allow the engine to run properly. Replace this assembly if the engine is hard to start, surges, stalls, runs rough, or if the old carburetor is leaking fuel and cannot be restored by cleaning or rebuilding.

This part is a replacement choke lever. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective choke lever in outdoor power equipment.The choke lever is important to the functionality of the choke, which enables the user to enrich the fuel mixture in an internal combustion engine. This lever will need to be replaced if broken, snapped, corroded, or otherwise faulty. It's important when working on or near to an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this choke lever, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this choke lever is suitable for use on several outdoor power equipment manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Please This is a genuine part made of high-quality, durable materials and is sold individually.

This is a threaded fastening bolt used in string trimmers to secure internal components in place. It ensures that parts remain tightly assembled during operation, preventing loosening from vibration. Replace this bolt if it is stripped, corroded, or missing, which can cause excessive vibration or component detachment.

Fix fuel leaks or starting problems with this gas line trimmer fuel tank assembly. Direct replacement for worn or cracked tanks. Moderate DIY repair.

This replacement part is a bar. This is a genuine replacement part made by MTD. This specific part is typically found in chainsaws. The bar holds the chain in place and connects the moving parts to the user settings at the top of the machine.A new bar might be needed if the current one is damaged in any way. This might include being dented, bent, or cracked. If the bar is not in working condition, the chain will most likely not be able to stay in place and the entire machine could be useless. Be sure to wear work gloves as this part is close to the chain in the chainsaw and can cause injury. This part is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit.

This genuine replacement part is a MTD 14 inch chain for use with chainsaws. A properly functioning chain is essential for the safe and reliable use of a chainsaw. The chain attaches to the cutting bar and rotates quickly to provide cutting functionality. The chain may become worn out or damaged due to extended use, necessitating replacement. Remember to check the chain periodically to spot any wear or damage. This part is an identical replacement for a chain that is missing, worn out, or damaged. Prior to working with this part, please refer to the original product manual for a full list of included parts and installation instructions. Additional tools may be required for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and is sold individually. It is made of high-quality durable metal. This part is compatible with Troy-Bilt, Cub Cadet, and other chainsaws. Please note: original part numbers 214919, 214919-33, and MC-6220-210803 are now obsolete, and manufacturer has replaced the original part numbers with this part.

Engine won't start or runs rough? This carburetor mixes fuel and air for smooth operation. Essential for restoring proper engine performance in handheld products.

Fix grinding noises or motor failure with this chainsaw motor gear. Replaces stripped gears that prevent smooth engine operation. Essential repair part.

Replacement brush cutting blade for wood chippers and shredders. Replace when dull or damaged to restore cutting performance. Verify fit with your model.

This is the left-side handle tube for a leaf blower. It serves as a structural grip point, allowing the operator to hold and direct the blower during use. Replace this tube if it is cracked, bent, or broken, which can make the blower difficult or unsafe to control.