Parts for Ge JES1290ML02: 01 - Microwave Parts

The Microwave Door Switch is an OEM replacement part for GE microwaves. It is crucial for safety functionality as it detects when the door is properly closed and latched before initiating cooking cycles. The switch prevents operation if the door is ajar.

Causes of a bad door switch can include wear and grime accumulation over many years of use, impact damage, or failures in the plastic actuator or electrical components.

Symptoms of a bad door switch include:

• The microwave failing to start cooking even with the door closed and latched
• Error messages related to the door position being displayed
• Inability to lock or properly sense the closed door position

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Fix a microwave that won't heat but runs normally. This magnetron generates the microwaves that cook your food. Professional repair recommended.

Fix microwave overheating or not heating issues with this thermostat cavity housing. Secures temperature sensor for reliable control. Easy install.

Replace a cracked, discolored, or missing lamp cover in your microwave. This clear protective guard shields the interior light bulb from grease and heat.

This microwave magnetron thermostat is an authentic OEM part sourced directly from the manufacturer. It is used in microwave ovens to prevent fires and extensive damage to the machine if the magnetron overheats. If the thermostat reaches an unsafe temperature, determined by the factory, it will stop the microwave from cooking. If this happens, the magnetron thermostat may be the culprit and should be replaced. A built-in safety feature will prevent the microwave from working until the thermostat is replaced. To start, disconnect the power from the microwave. Use a screwdriver to remove the trim kit. Use a safety drill bit to remove the microwave panels. Locate the thermostat that is connected to the magnetron. To start, disconnect the wires and remove the thermometer from the microwave. Install the new thermostat and connect the wires. Reassemble the microwave and reconnect the power. Test to make sure the power works with the new thermostat installed.This magnetron thermometer is an electrical part that is sold individually. It is designed for use in microwave ovens manufactured by General Electric and Hotpoint.

Replace your microwave's damaged, frayed, or missing power cord assembly. This main power cord restores the electrical connection for safe operation.

Replacement drive coupler for microwave turntable motor assembly. Needed when the plastic coupling is cracked, broken, or stripped, preventing tray rotation.

Convection fan not working or intermittent? This wiring harness restores electrical connections between your microwave's convection system and controls.

Secures the high voltage capacitor in your microwave. Replace if broken, loose, or missing to prevent capacitor movement and electrical hazards.

Microwave not heating or making loud buzzing noise? The high voltage diode converts AC to DC power for the magnetron. Common fix, moderate difficulty.

The Primary and Secondary Door Switch is an OEM replacement part for GE microwaves. This part interrupts the power supply to the microwave when the door is opened.   

Causes of bad door switches can include regular wear and tear, electrical malfunctions, or physical damage from slamming the door.  

Symptoms of a bad Primary and Secondary Door Switch include:

• The microwave not starting or operating intermittently
• The appliance operating with the door open
• The interior light not turning on or off appropriately

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Fix a microwave door that won't open or latch properly with this sliding latch component. Restores secure door engagement when the release button fails to work.

The Wave Guide Locking Button is an OEM part for GE microwaves. This small yet essential component secures the wave guide cover in place, ensuring that the microwave's internal components are protected from food particles and debris. It plays a key role in maintaining the microwave's efficiency and safety.

Causes of a bad wave guide locking button can include regular wear and tear, damage from frequent use, or accidental breakage. If the locking button is compromised, the wave guide cover may become loose, leading to potential damage or inefficiency in the microwave's operation.

Symptoms of a bad wave guide locking button include:

• Wave guide cover becoming loose or falling off
• Difficulty securing the wave guide cover in place
• Rattling noise inside the microwave
• Visible damage or wear on the locking button

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Note: This part is a quantity of one. Order quantity needed.

Lower door hinge for microwaves. Mounts to the base cabinet to support and secure the door. Replace if cracked, broken, or bent to restore proper alignment.

Replacement foot for microwaves. Provides stable, cushioned support for the cabinet or removable rack. Needed when original is cracked, broken, or missing.

This is a light bu, and it is made for microwaves. This is a genuine replacement part made by General Electric. This specific light bu has a voltage of 120 and a wattage of 25.A new light bu might be needed if the current one does not turn on when the microwave door is opened. The light bu should also be on when the microwave is in use so that the user may see the food during the heating cycle. It is common for light bu to burn out over time and they are very easy to replace when needed.This is an OEM part sourced directly from the manufacturer. It is sold individually and is compatible with microwaves made by General Electric.

Terminal spring for microwave electrical connections. Installs on terminal blocks to secure wire connections. Replace if spring is broken, bent, or missing.

Secures the damper assembly inside your microwave. Replace this bracket if it's cracked, bent, or broken to properly mount and support the damper component.

Fix a microwave that's overheating or not cooling properly with this blower wheel replacement. Restores proper ventilation and prevents shutdowns.

This tray glass is the replacement glass shelf used inside compatible ovens to hold cookware and bakeware safely. It restores a stable, heat-resistant surface so you can cook and clean with confidence. What it does:

• Provides a flat, heat-toleran

Replacement turntable tray rack assembly for your microwave. Installs on the rotating base to support the glass tray. Order when cracked or broken.

Replace a damaged U-shaped oven bake element with this exact-fit heater assembly to restore even baking and browning. Designed to slide into the oven cavity and heat reliably when the range is on. What it does:

• Heats the oven cavity for baking a

Fix a microwave that won't start, has no display, or buttons don't respond. This main control board restores full functionality. Moderate difficulty repair.

Microwave stops heating but clock still works? This door interlock switch monitors door position and prevents operation when the door isn't latched securely.

This bag screw assembly secures and fastens the appliance bag or liner, restoring proper fit and preventing shifting during operation. It's a direct-fit service part that helps maintain reliable performance. What it does:

• Fastens and secures the appliance bag or liner in place
• Prevents the bag from slipping or bunching during use
• Reduces noise and potential debris spillage caused by a loose bag
• Helps restore normal operation when bag movement is the symptom

• Disconnect power to the appliance before starting any repair
• Inspect surrounding components for wear; replace any damaged retainers or clips
• Use appropriate hand tools; avoid overtightening to prevent damage