Mtd String Trimmer Parts

Hex screw fastener for securing lawn mower components. Replace if stripped, rusted, or missing to ensure proper assembly and equipment stability.

This is a wheeled string trimmer belt compatible with many brands. The belt's purpose is to drive the unit, transferring power from the engine to the cutting head. Over time, belts are subject to wear and tear, heat, and humidity. This can make the belt brittle and eventually it will snap. In other instances, belts will stretch after being used for long periods and need to be replaced. Replacing the belt is a simple process. Start with the engine off and the spark plug disconnected. Remove the screw holding the chassis cover in place and then the screws holding the debris shield. With the debris shield out of the way, the belt should be clearly visible. Remove the engine pulley, but make sure to note the pulley's position for replacement. Install the new belt and reassemble the trimmer. This part is a genuine OEM part sourced directly from the manufacturer and sold individually. This belt is compatible with Craftsman, Bolens, Remington, Ryobi, and Yard-Man brands.

Wing knob for lawn mowers and snow blowers. Secures chutes, bagger frames, and adjustable components. Replace if cracked, broken, or missing.

Lower flexible drive shaft for line trimmer attachments. Mounts inside the lower boom housing to drive the trimmer head. Replace when worn round or cracked.

Hex head self-tapping screw for outdoor power equipment. Securely fastens components throughout your machine. Replace if missing, stripped, or worn.

Foam air filter prevents debris from entering your engine. Replace if dirty, clogged, or causing black smoke and high fuel consumption. Verify fit.

The clutch assembly uses centrifugal force to connect the shafts and create the drive shaft motion that powers the machine. The drive shaft nests inside the other shaft, and over time these parts can wear and become damaged with regular use. Today's parts can even continue to function long past when they should, so it may not be apparent that a clutch assembly needs to be replaced until the entire unit is bad. If the engine is not performing as it should or if the drive shaft seems unstable, it may be time to replace the clutch assembly. This genuine OEM part includes everything needed for the job. This OEM clutch replacement is designed for use with various cultivators, edgers, and trimmers. It can be used on machines from MTD, RYOBI, Troy-Bilt, Bolens, Yard-Man, Cub Cadet, Murray, and Husky. This assembly includes the clutch, clutch drum, washer, and left-hand threaded screw. Always disengage the spark plug and allow the engine to cool completely before beginning repairs.

This is a genuine OEM replacement air filter and housing designed for select outdoor trimmers. The air filter and housing are important to keeping the engine clean. The filter helps to keep debris and dirt from getting into the engine while the filter housing protects it from excess debris or impact damage. Together, they ensure that the engine only gets clean, filtered air for optimal performance. Over time, the filter will become clogged and checking and replacing it should be part of routine maintenance. It is a good idea to inspect the cover assembly when replacing air filters or doing other maintenance to identify potential repairs or issues that need attention. Be sure to wear gloves when performing this repair. Replacing the filter is easy, but there are some instances where the entire unit needs replaced. This genuine OEM part can provide the perfect fit for select trimmers from Craftsman and MTD. It is sold as a complete assembly with the filter and housing. No hardware is included. There are no tools required to install this part.

Extension spring for snow blower idler pulley assemblies. Mounts to housing to maintain proper tension in belt drive system. Replace if stretched, broken, or missing.

Cogged rubber belt that rotates the augers in your snowblower. Replace when stretched, cracked, or slipping. Verify fit with your model number.

Air filter for lawn mowers and outdoor power equipment. Replace when dirty or clogged to maintain engine performance. Verify fit with your model number.

Carriage screw that secures various components on lawn mowers and snowblowers. Replace if your screw is stripped, loose, missing, or damaged during use.

Star knob connects upper and lower handles on lawn mowers and outdoor equipment. Replace if threading is worn, cracked, or knob is missing for secure assembly.

Throttle cable assembly for gas line trimmers. Connects carburetor to control lever. Replace if cable is stretched, frayed, kinked, or broken from use.

This is an insulator assembly includes the insulator, seals, and hardware. It is designed to create the right spacing between the cylinder and carburetor on many blowers and trimmers made by various manufacturers. The insulator assembly also keeps heat from moving between the other components. Over time, the insulator assembly can become damaged or crack. When this occurs, air can reach the engine and create a condition where the engine can't perform at its best. If this happens, the insulator assembly will need to be replaced. Take off the air filter, drain the fuel, and remove the intake assembly. The insulator can be taken off of the engine before the replacement is added. Use mounting screws to fit the insulator to the other components. Reassemble the other parts to use the tool.This insulator assembly is a genuine OEM replacement part sourced directly from the manufacturer. It is sold as an individual part. This component is made to be used in leaf blowers, tillers, and string trimmers manufactured by Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Bolens, and Yard-Man.

Secures the air filter and protects internal engine components from debris. Replace if cracked, broken, or damaged to maintain proper filtration coverage.