Murray Fastener

This self-tapping screw is used to attach various parts to the engine housing of medium sized gasoline powered engines, in particular yard tools such as tillers, snow blowers, yard tractors, riding mowers, power vacuums, shredders, and chippers. It is used in over 150 different gasoline powered engines. Screws such as these are used particularly when a device is going to receive a great amount of vibration and stress while the engine is running and rotating tools are engaged. Such devices sustain a great deal of wear over time and the parts subject to replacement will eventually fail and need to be replaced. In such cases, it is wisest to replace the attaching hardware such as housing screws as well, because it is a self-tapping screw. Screws of this type are designed to forge a tight bond between the metal pieces they are securing together, but once loosened, they should ideally be replaced with new hardware. Make sure when replacing these screws to use genuine OEM parts like these screws. These replacement parts are manufactured to be identical to the original pieces. This hex screw is compatible with the following brands: MasterCut, Yard-Man, Yard Machine, Montgomery Wards, MTC, Murray, Bolens, Craftsman, Turf King, Troy Bilt, Cub Cadet, Huskee, Toro, and Ryobi.

This is a flange lock nut that can be used for a wide range of lawn and garden equipment. It can also be used in many other applications. A flange lock nut is a hex nut that features a large circular base at the bottom of the nut. This will act like a non-spinning washer and it is integrated right into the nut.Owners might find any number of reasons to replace the flange lock nuts on their equipment. They might become damaged or lost. The threads might be stripped. It is always better to make a replacement sooner rather than later. Owners will find that the difficulty of replacing the nut tends to be simple, but it can vary based on its location on the machine.The flange lock nut can be used with many types of equipment from MTD, Troy-Bilt, Craftsman, and Cub Cadet. This nut is sold individually, so owners might want to buy more than one to have extra on hand. This is a genuine OEM replacement part.

This part is a replacement screw. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken, stripped, or lost screw in outdoor power equipment. Screws hold together components in the equipment and thus are essential. They will need to be replaced if lost, stripped, corroded, or otherwise unable to hold parts together securely. Screws are a standard piece of hardware that have many different uses. It's important when working on or near to any engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this screw, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this screw is suitable for use on several outdoor power equipment manufactured by MTD, Craftsman, Troy-Bilt, Cub Cadet, Husky, and other brands. Please This is a genuine part made of high-quality, durable metal and is sold individually.

This replacement screw is useful for many different types of handheld outdoor equipment. Screws are used as a means to hold parts of the machine together. The screws also help to reduce the amount of vibration that occurs in the machine.These screws are used in outdoor equipment, so there is a chance they could corrode over time. In some cases, the screws may also lose their thread, or the heads of the screws could start to become worn down. Owners who notice issues with the screws, or who notice a missing screw should replace them to ensure the proper function of the machine. Failure to replace damaged screws could result in more difficulty replacing them after they wear down further.The screw works on various types of equipment including blowers and trimmers. It is compatible with a range of brands including Murray, Craftsman, Yard Machines, Bolens, Yard-Man, Craftsman, Ryobi, and McCulloch. This is a genuine OEM part sourced from the manufacturer, and it is sold individually.

The hex lock nut is found on many different types of outdoor lawn equipment, as well as other types of equipment. The lock nut works to secure bolted joints by adding friction to the bolt threads. The nut has flat sides, which can easily be gripped by a wrench to be tightened or loosened as needed. These types of nuts are common, as they provide easy assembly and disassembly of various parts. Buyers may need a new hex lock nut for a range of reasons. The nut that is currently on the equipment could have become damaged or lost while working on the machine. It is vital for all of the nuts to be in place and properly secured on the equipment before use. This is an authentic OEM part. Some of the products that use hex lock nuts include lawn mowers, snowblowers, tillers, edgers, string trimmers, and log splitters. Common equipment brands using these nuts include Craftsman, Toro, Cub Cadet, Yard Machines, and Troy-Bilt.

This is a flat washer with an inner diameter of .469 inches. The washer is a replacement part that is for use with types of lawn and garden equipment. Flat washers help to increase the size of a screw's bearing surface area. It will help to reduce the surface pressure that is applied when the pieces are fastened together, and it will help to protect the pieces being connected.The flat washer is made from metal, which means it is durable. However, even metal can start to wear away over time. It could become thinner, corrode, or even become cracked. When this happens, owners will need to replace the washer. In some cases, the washers might become lost when working on the machine. Getting a new washer to replace any that are missing is essential.The flat washer will work with a range of select machines including tillers, lawn tractors, snowblowers, cultivators, and mowers from Yard-Man, Troy-Bilt, Ryobi, MTD, Bolens, Yard Machines, Husky, and Cub Cadet. The washer is sold individually and is a genuine OEM replacement part.

This replacement part is a washer. This part is small but important in various types of equipment. Washers work with other small parts like screws and nuts to ensure that multiple parts are secure and in place during use.A new washer might be needed if the current one is worn down or damaged. It is not uncommon for washers to become dented or otherwise damaged over time due to friction and normal wear and tear within the machine. Work gloves are recommended when working with small parts like washers. Be sure the engine is powered down before attempting to complete this job.This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This washer is compatible with most lawn mowers and lawn tractors. The smooth, round edges fit perfectly with 5/8-inch bolts to attach the bolts to parts on the mower, as necessary. The washer provides a buffer between the bolt and the surface that it is being attached to. They are highly recommended for protecting parts that are being fastened together.The lack of a washer can cause permanent damage to the piece that the bolt is attached to. If the bolt does not have a washer to prevent it from moving and rusting, it can cause the bolt to fail. With products such as lawn mowers, this can spell disaster for both the appliance and its handler. These washers are high-quality and will prevent excess corrosion for the bolt. However, moisture and residue left after use can cause the washers to fail. In this case, a replacement will be necessary. This replacement part is compatible with most lawn mowers and tractors. This includes Ace, Ryobi, and MTD. This is an OEM replacement part sourced directly from the manufacturer. Sold individually.

This genuine MTD shoulder screw is an OEM replacement for use on select MTD machines and outdoor power equipment. The shoulder screw has several applications depending on the exact model of equipment, although it is often used to hold handles in place on push mowers. These screws can become worn or get lost over time, necessitating a replacement. It's important to always use genuine OEM parts when making a replacement on outdoor power equipment. This OEM shoulder screw is manufactured to exact standards by MTD and designed to work with several machines that are manufactured by the brand, along with select models from other outdoor power brands. It is sold as an individual unit, and those who need more than one will have to purchase additional quantities. This part can generally be replaced with minimal effort and won't usually require much disassembly. Gloves should be worn for safety whenever working on outdoor equipment, and it may be a good idea to disconnect the spark plug, as well.