Parts for Lg LDT7797BD/00: Panel Assembly Parts

The Affresh Dishwasher Cleaner is an OEM accessory designed specifically for Whirlpool brand dishwashers. This citrus-scented tablet removes residue, odor-causing soils, and food particles from the dishwasher tub and gasket area during the cleaning cycle. Symptoms of a buildup include unwanted odors emanating from the dishwasher, especially after opening the door. Over time, residue and grime accumulate in hard-to-reach areas and provide an environment for mold and mildew growth.

Regular cleaning helps prevent this by removing leftover soils before they harden or encourage bacterial activity. The Affresh tablet utilizes a unique blend of cleaning ingredients that target soils and biofilms through a combination of powerful scrubbing action and natural cleaning enzymes.

As the #1 recommended dishwasher cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and select Kenmore dishwashers for consistent cleanliness and freshness. The package includes six tablets 4.2 ounces

This lower frame is the factory replacement trim piece that mounts to the base of the appliance door/cabinet, restoring proper fit and finished appearance. It helps protect the lower edge and keeps the door aligned. What it does:

• Replaces a damaged, cracked or bent lower cabinet/door frame to restore proper sealing and appearance.
• Supports the bottom edge of the door or cabinet opening to help maintain alignment and smooth operation.
• Prevents debris and moisture from collecting under the door trim.
• Helps eliminate rattling or loose trim caused by broken or worn lower frame pieces.

• One lower frame

• Basic removal of the door or front panel may be required; retain screws and fasteners for reassembly.
• Handle panels and sharp edges with care; wear gloves to protect hands.
• Disconnect power (and water if applicable) to the appliance before beginning any disassembly.

Detergent and rinse aid dispenser

This handle assembly is the replacement door handle that restores a secure grip and normal door operation. It replaces a damaged, cracked or loose handle so the door opens and closes reliably. What it does:

• Replaces a worn or broken door handle to restore safe, solid grip and control
• Corrects issues like a cracked, loose or missing handle that make the door hard to open
• Matches OEM fit and mounting points for a direct replacement when installed correctly
• Helps prevent further damage to the door or latch caused by using a compromised handle

• Use common hand tools; follow OEM diagram for correct screw locations and orientation
• Support the door while removing and installing the handle to avoid scratching or misalignment
• Do not overtighten fasteners — snug is sufficient to avoid cracking the handle

The Dishwasher Installation Bracket Kit is an OEM part for LG dishwashers. This kit includes brackets that secure the dishwasher to the countertop, cabinetry, or floor, ensuring it remains stable during operation. Proper installation of these brackets is essential for preventing excessive movement and vibration during the dishwashing cycle.

Over time, installation brackets can become loose or damaged due to constant vibrations, improper installation, or accidental impacts. If the brackets are compromised, the dishwasher may not be securely anchored, leading to various operational issues.

Symptoms of a bad installation bracket kit include:

• The dishwasher moving or shifting during operation
• Increased noise and vibration levels
• Difficulty in keeping the dishwasher level
• The dishwasher door not closing properly

This OEM LG part is also compatible with Sears/Kenmore.

This factory-assembled replacement installs in the same location as the original assembly on your appliance. It restores proper fit and operation when the original component is broken, worn, or missing.

• Replaces the complete assembly specified for your model
• Restores correct fit, alignment, or movement of the associated mechanism
• Helps resolve issues caused by cracks, wear, or physical damage in that area
• Match by part number and model for an exact fit

• Disconnect power before servicing; shut off water or gas supply if applicable
• Use your model's parts diagram to confirm location and orientation
• Transfer any mounting hardware or brackets from the original assembly
• Handle sharp edges carefully and verify proper operation before final reassembly

This small sleeve bushing supports a pivoting or rotating joint in your dishwasher, providing a smooth bearing surface. Replacing a worn bushing helps restore quiet operation and protects mating parts from further wear. What it does

• Provides a low-friction surface between a shaft/pin and bracket
• Helps maintain proper alignment and reduces wobble at the joint
• Can quiet squeaks or grinding caused by wear
• Replacing a cracked or flattened bushing can improve smooth movement

• 1 bushing

• Disconnect power and shut off water before servicing
• Support the door or component attached to the joint to relieve tension
• Note orientation; transfer any spacers/washers in the same order
• Inspect the mating pin/shaft for wear and replace related parts if damaged

A replacement hinge spring that restores proper door tension and alignment for smooth opening and closing. Helps correct sagging or uneven door movement so the door seals and operates reliably when installed correctly. What it does:

• Provides tension for the door hinge to support and balance door movement during opening and closing.
• Helps the door close fully and stay aligned, reducing visible gaps or misalignment.
• Replaces worn or broken springs that can cause sagging, uneven closing, or noisy operation.
• Restores smoother, more controlled door action and reliable sealing when combined with intact hinge hardware.

• Disconnect power or unplug the appliance before starting any repair to avoid electrical hazards.
• Handle the spring carefully—stored tension can cause sudden movement; use proper tools and eye protection.
• Installation may require removing the door or hinge cover and supporting the door while swapping the spring.

The Dishwasher Door Cable Connector Assembly is an OEM replacement part for LG dishwasher. The cable connector assembly works with the door cable to properly guide and support the door as it moves through the full range of opening and closing motions. 

Causes of a bad door cable connector can include wear and tear over time resulting in cracks, loose connections, or broken or damaged connectors that no longer securely attach the cable. 

Symptoms of a bad door cable connector include:

• The door not properly aligning when closed 
• Difficulty opening or closing the door smoothly
• Noisy operation or rattling sounds from the door area
• The door not latching securely in place

This OEM LG part is also compatible with select Sears/Kenmore brand models.

This drum roller supports the dryer drum for smooth rotation and quieter operation. Replacing a worn roller helps reduce noise and drum wobble so the dryer runs more reliably. What it does:

• Supports the drum rim and allows the drum to spin smoothly under load
• Reduces squeaks, thumps and vibration caused by worn or damaged rollers
• Helps prevent uneven drum wear and excessive belt stress
• Works as a direct replacement for the factory roller in compatible dryers

• Disconnect power (and gas, if applicable) before beginning any service
• Access the roller per the manufacturer's service instructions (panel/drum removal is typically required)
• Inspect the drum, belt and other rollers/shafts while the unit is open; replace any worn components
• After installation, rotate the drum by hand to ensure smooth movement before reassembly

The WATER LEVEL SENSOR ASSEMBLY is an OEM component specifically designed for LG dishwashers. It is an electronic sensor responsible for monitoring and detecting the water level inside the dishwasher tub during each cycle. Precise water level detection allows the dishwasher to optimize water usage and ensure all cycles run as intended. 

Causes of a bad sensor assembly can include the buildup of sediment or minerals on the sensor contacts over time, leading to improper readings. Physical damage from impact could also affect sensor function.

Symptoms of a bad water level sensor assembly include:

• Incomplete or failed wash cycles 
• Error codes related to water issues
• Inability to fill or drain properly
• Flooding or leaks from the dishwasher 

Replace yours today with this genuine OEM LG part to maintain proper dishwasher operation. This OEM LG part is also compatible with Sears/Kenmore.

Check valve that prevents water backflow in the appliance's supply line, helping restore proper water flow to the ice maker or dispenser. Replaces a failed valve to address leaking, slow fills, or no-fill conditions. What it does:

• Stops reverse flow in the water line so water only moves toward the dispenser or ice maker
• Helps prevent water leaks and cross-contamination of the supply line
• Common symptom fixes: intermittent or no water to ice maker/dispenser, weak fills, or water pooling
• Fits inline with existing water tubing and works with the appliance's fill system

• Shut off water supply and unplug the appliance before replacing the valve
• Confirm tubing size and orientation before installation; install with correct flow direction
• Tighten fittings to prevent leaks but avoid overtightening plastic fittings

The Diverter Motor Assembly is an OEM part for LG dishwashers. It is a critical component used to control the direction of water flow within the dishwasher, ensuring that water is properly diverted between the different spray arms during various wash cycles.

Symptoms of a failing Diverter Motor Assembly include:

• Inadequate cleaning of dishes, with some areas remaining dirty
• Unusual noises, like humming or clicking, indicating the diverter motor is struggling to operate
• Error codes displayed on the dishwasher that relate to water distribution problems
• Water not reaching all spray arms

Causes of a bad diverter motor can include wear and tear from regular use, electrical issues such as faulty wiring or motor failure, and mechanical obstructions or debris that prevent the diverter from moving smoothly.

This OEM LG part is also compatible with Sears/Kenmore models.

The Micro Switch is an OEM part for LG dishwashers. It plays a crucial role in detecting when the door is securely closed prior to starting a cycle. This important safety feature prevents accidental exposure to hot water, detergent, and chemicals. 

Causes of a bad micro switch include degradation from years of repeated use, debris interfering with mechanisms, or damage from attempts to force or slam the dishwasher door closed.

Symptoms of a bad micro switch include:

• Cycles failing to start despite a closed door
• Hot water or steam visible escaping when running 
• The dishwasher not detecting the closed door position
• Error codes displayed related to door position sensors

This OEM LG part is also compatible with Sears/Kenmore. Replacing only when truly faulty helps ensure safe and reliable dishwasher function.
 

The Circulation Pump Assembly is an OEM part for LG dishwashers. This part circulates the water and detergent solution throughout the dishwasher tub and spray arms during the wash cycles.

Causes of a bad dishwasher circulation pump assembly can include wear and tear on the pump impeller or seals, blockages or obstructions preventing proper water flow, or electrical or mechanical failures within the pump assembly itself.

Symptoms of a faulty circulation pump assembly include:

• Inadequate water circulation or lack of water spray
• Dishes not getting clean or having food residue left behind
• Excessive noise or vibration during wash cycles
• Leaks or water spillage from the dishwasher

This OEM LG part is also compatible with some Kenmore models.

The Lower Cover Assembly is an OEM replacement part for LG washing machines. It serves as the base enclosure for the washer, housing various components such as the motor, pump, and other mechanical parts.

Symptoms of a need to replace the lower cover assembly include:

• Visible cracks, damage, or warping of the cover
• Leaks or water seeping from the bottom of the washer
• Excessive noise or vibration during operation

Causes of a damaged lower cover assembly can range from physical impact or stress, to wear and tear over time. Water exposure or moisture buildup can also contribute to the deterioration of the cover.

This OEM LG part is also compatible with select Sears/Kenmore washing machine models.

This guide assembly is the sliding rail that supports and aligns the freezer drawer. When worn or damaged, it can cause sticking, sagging, or poor sealing; replacing it restores smooth operation and proper drawer closure.

• Supports the freezer drawer and lets it glide smoothly in and out
• Keeps the drawer square and aligned with the front panel
• Helps the drawer close fully to maintain a proper seal
• Common symptoms: drawer hard to open/close, crooked or sagging drawer, grinding/squeaking, frost from incomplete closure, visible rail damage

• Disconnect power before servicing; empty the freezer drawer
• Pull the drawer out, remove the front panel and basket as needed
• Remove mounting screws and the old guide; reuse existing hardware if applicable
• Install the new guide, then verify both sides move evenly and the drawer seals properly

This inlet hose directs the incoming water supply into the appliance so it can fill and operate properly. Replacing a damaged or worn inlet hose restores a secure water connection and helps prevent leaks and fill issues. What it does:

• Channels household water from the supply to the appliance's fill system.
• Ensures a watertight connection at the water inlet to reduce leak risk.
• Restores normal fill behavior when a cracked, split, or clogged hose causes slow fill or no fill.
• Works with standard inlet fittings and clamps used on compatible appliances.

• One inlet hose.

• Turn off the water supply and unplug or disconnect power before servicing.
• Use the correct fittings and clamps; hand-start threads to avoid cross-threading, then snug with a wrench—do not overtighten.
• Inspect hose ends and inlet seal for damage; replace clamps or seals if needed.
• After installation, restore water and power, run a short fill cycle and check thoroughly for leaks.

A small snap-on trim cap used to cover and protect exposed fasteners or openings, restoring the appliance's finished appearance and helping keep debris out of the cavity. What it does

• Covers and conceals exposed screw heads or shaft ends for a clean look
• Helps prevent dust and lint from entering small openings
• Restores damaged or missing finish trim on the appliance
• Fits as a simple cosmetic/protective replacement — commonly used where a snap-fit cap is required

What's included

• One cap cover

Install notes

• Snap into place over the exposed fastener or opening; no special tools usually required
• Disconnect power or follow appliance safety procedures if working near electrical components
• Replace only with the matching part number to ensure proper fit

The Drain Pump Case Assembly is an OEM replacement part for LG dishwashers. This component houses the drain pump, which is responsible for removing water from the dishwasher tub during the drain cycle.

Causes of a bad drain pump case assembly can include physical damage or cracks in the case, worn-out seals or gaskets, or issues with the internal components, such as the pump impeller or motor.

Symptoms of a bad drain pump case assembly include:

• Water not draining from the dishwasher tub
• Loud grinding or humming noises during the drain cycle
• Leaks around the pump area
• Error codes or indicators related to drainage problems

This OEM LG part is also compatible with Sears/Kenmore dishwasher models.

The Lower Spray Arm is an OEM part for LG dishwashers. It is responsible for cleaning dishes positioned in the lower rack through its rotating spray of water.

Causes of failure can be mineral or limescale buildup inhibiting rotation, broken or loosened mounting brackets, or damage from impact.

Symptoms of a bad lower spray arm include:

• Items in the lower rack remaining dirty or soiled after cycles
• Noticeable reduction in spray pressure from the lower rack
• Arm not rotating or spinning during the wash cycle

This OEM LG part is also compatible with some Kenmore models.

The Shaft,Nozzle is an OEM part for LG dishwashers. This part is located inside the dishwasher's spray arm assembly and is responsible for distributing water to the spray arms during the wash cycle.

Causes of failure can be mineral deposits that clog the nozzle openings or flexible shaft deterioration over time.

Symptoms of a bad shaft or nozzle include:

• Inadequate or uneven spray coverage inside the dishwasher
• Dirty dishes, especially on hard to reach areas
• Reduced water pressure during the wash cycle

This OEM LG part is also compatible with some Kenmore models.

The Fill Funnel Gasket is an OEM part for LG dishwashers. It is located inside the fill funnel that pours water into the dishwasher during cycles. The gasket seals around the fill funnel to prevent leaks and direct water as intended. 

Symptoms of a bad fill funnel gasket include:

• Water leaking from the fill funnel area into the interior tub during washing cycles
• Puddles forming inside the tub, not related to normal operation  
• Gaps or tears appearing where the funnel meets the surrounding gasket seal

Causes of a bad fill funnel gasket can be wear and tear over time if the funnel is moved often during loading or maintenance. Chemical residue or mineral buildup could also deteriorate the rubber material.

This replacement part is also compatible with Sears/Kenmore models for simple installation and reliable repairs.

This Nozzle Assembly is an OEM part for LG dishwashers. Crafted to seamlessly fit and function within LG dishwasher models, this vital component ensures optimal water distribution for efficient cleaning. Constructed with high-quality materials, the assembly guarantees durability and longevity.

A common issue with this part arises when sediments or debris obstruct the nozzles, leading to inadequate water flow or uneven spraying. Additionally, wear and tear can cause the nozzles to become clogged or damaged, affecting the dishwasher's performance.

Symptoms of a faulty Nozzle Assembly include:

• Incomplete cleaning of dishes
• Poor water pressure during cycles
• Spots or residues on cleaned items
• Unusual noises from the dishwasher

This OEM LG part is also compatible with some Sears/Kenmore models.

The Spray Arm manifold is an OEM component specifically designed for LG dishwashers. This manifold is responsible for distributing water from the inlet valve to each spray arm throughout the dishwasher. It provides direct pathways for water to reach all areas of the tub.

Causes of a bad spray arm manifold can include mineral or sediment buildup within the waterways over time. Small debris could also potentially clog or restrict the pathways.

Symptoms of a bad spray arm manifold include: 

• Uneven or incomplete spray pattern from one or more spray arms
• Reduction in cleaning power and water pressure
• Staining or residue left on dishes
• Loud clanking or knocking noises from inside the dishwasher

This OEM LG part is also compatible with select Sears/Kenmore dishwashers. 

This dishwasher mesh filter assembly sits in the sump to screen food particles from the wash water. Replacing a damaged or clogged filter helps restore water flow, protect the pump, and maintain cleaning performance.

• Traps food debris before water recirculates through the spray system
• Helps prevent pump and spray-arm clogs that can reduce wash pressure
• Supports cleaner results by reducing redeposit and gritty residue
• Typical signs it needs replacement: torn mesh, warped frame, persistent residue, or grinding noises from debris

• Disconnect power at the breaker and shut off water before servicing
• Remove the lower rack; rotate/unlock and lift out the old mesh filter; clean the sump area
• Seat the new filter flat, align tabs, and lock it in place; reinstall the rack and run a quick test cycle

This refrigerator water filter cartridge helps reduce common impurities and improves the taste and clarity of drinking water and ice. It's a direct-replacement style designed to fit compatible LG refrigerator filter housings. What it does

• Reduces sediment, chlorine taste and odor commonly found in household water supplies
• Helps improve the taste and clarity of ice and dispensed water
• Restores proper filtration when your fridge shows reduced water quality or off-flavors
• Maintains normal water flow when properly installed and not clogged

• Replace with power on and water supply turned on; follow refrigerator manufacturer instructions
• Flush several gallons of water through the filter after installation to remove trapped air and loose carbon fines
• Dispose of used cartridge according to local recycling/disposal rules
• If you continue to experience poor water quality or low flow after installation, check the refrigerator's filter housing and water supply line

This replacement wire rack restores secure storage and organization inside your appliance so dishes, pans, or food items sit stable and move smoothly. It replaces worn, bent, or damaged shelving to help maintain normal loading. What it does

• Provides a stable platform for dishes, cookware, or food containers
• Replaces bent, broken, or rusted wire shelving that can cause unstable loads
• Restores proper spacing and support to prevent items from shifting during use
• Helps prevent scratches and contact damage to interior surfaces

• One replacement wire rack

• Refer to your appliance's service manual for exact removal and installation steps
• Handle edges carefully; wire racks may have sharp points or exposed ends
• No special tools usually required — lift, slide, or snap into position per OEM guides
• If the rack uses clips or rollers, inspect and replace any worn hardware for best fit

This case assembly is the outer housing that holds and protects the appliance's control components and switches, restoring a finished appearance and keeping electronics secure. It's a direct-replacement style part for visible control areas. What it does:

• Provides a protective enclosure for control boards, switches and user interface components
• Restores a secure, stable mounting point for buttons, levers and display elements
• Helps prevent dust, moisture and debris from reaching internal electronics
• Can resolve loose or damaged control bezel issues and improve appliance appearance

• Handle carefully to avoid scratching the visible surfaces and damaging tabs or mounting points
• Power off and unplug the appliance before starting work to reduce risk of shock
• Retain and reuse any clips, screws or gaskets from the original part unless replacements are supplied

This safety switch assembly replaces a failed door/interlock switch to restore the appliance's ability to detect and respond to door position, helping ensure cycles only run when the door is closed. Fits as a direct replacement for the original switch assembly. What it does:

• Detects door/lid position and prevents operation when the door is open
• Helps stop the motor or heating function if the door is opened mid-cycle
• Commonly replaces units that show no power to controls or won't start with the door closed
• Can address intermittent operation or machines that behave as if the door is open

• Disconnect power before servicing to avoid shock or injury
• Replacement requires access to the door/lid area; basic hand tools needed
• Verify proper wiring orientation and secure connectors before reassembly

This Door Seal is an OEM part for LG dishwashers. It plays a crucial role in preventing water leaks by creating a watertight seal around the dishwasher door. 

Over time, door seals can degrade due to constant exposure to water, detergents, and varying temperatures. This can lead to a compromised seal, increasing the risk of leaks during operation.

Symptoms of a failing door seal in a dishwasher include:

• Water leaking from around the dishwasher door.
• Visible signs of wear, cracks, or damage to the seal.
• The door not closing as tightly or securely as it used to.
• Dampness or water marks on the floor near the dishwasher after use.
• An increase in noise during operation, potentially due to water escaping the seal.

This OEM LG part is also compatible with some Sears/Kenmore models.
 

This parts assembly is a direct-replacement assembly used to restore the original mechanical/electrical components it contains so the appliance can operate as designed. It replaces a worn or damaged assembly to help resolve related failures. What it does

• Replaces the factory assembly that houses the appliance's internal components and connections.
• Restores proper component alignment and secure mounting to prevent intermittent faults.
• Addresses symptoms such as failure to operate, unusual noises, loose or damaged internal parts, or intermittent electrical/connectivity issues.
• Works as the factory-specified repair for units showing wear or damage in the affected assembly area.

• Disconnect power (unplug or shut off breaker) before servicing to avoid shock or injury.
• Handle internal components carefully to avoid damage to wiring, connectors, or sensors.
• Follow the OEM service manual and wiring diagrams for correct installation and routing.

This parts assembly is a factory-style replacement component designed to restore the original function of the affected subsystem. Use it to replace a damaged or failed assembly and return the appliance to normal operation. What it does

• Replaces the failed factory assembly that controls or supports a specific appliance subsystem.
• Restores mechanical or electrical connections needed for normal operation.
• Common symptom linkage: appliance fails to operate, shows error codes, runs intermittently, or has reduced performance.
• Helps address issues caused by visible damage, burnt connectors, or broken mounting points.

• One parts assembly.

• Disconnect power (and water, if applicable) before beginning any repair.
• Handle connectors and circuit paths carefully to avoid damage; replace any damaged fasteners or wiring.

The Rail Assembly is an OEM part for LG dishwashers. This rail assembly supports the upper dish rack and guides it smoothly in and out of the dishwasher.

Causes of a bad rail assembly include wear from repeated rack extension and retraction over many cycles, damage due to overloading racks, or impact that has bent rail components out of proper alignment.

Symptoms of a bad rail assembly include:

• Upper rack not smoothly rolling in and out of the dishwasher
• Binding, catching, or loud noises when operating the upper rack
• Rack unable to fully extend or retract as designed
• Rack unable to stay securely locked in closed position

This LG part is also compatible with some Kenmore models.
 

The Utensils Basket Assembly is an OEM replacement part for LG dishwashers. This assembly holds utensils and other small dishes upright during the washing cycle. It is designed with multi-level prongs and slots to accommodate different-sized utensils in an organized manner. 

Symptoms of a bad utensils basket assembly include:

• Prongs that are bent or broken, preventing proper placement of utensils
• Detached or missing pieces that compromise the structural integrity of the basket
• Difficulty removing or replacing the basket due to damage or wear

Causes of failure may include normal wear and tear over time, damage from improper loading of utensils, or handling during cleaning. 

This LG replacement part is also compatible with select Sears/Kenmore brand models..

The Blower Motor Casing Assembly is an OEM part for LG dishwashers. This part houses the blower motor which generates airflow through the wash arms and drying vent. The casing is precision-engineered to fit securely within the dishwasher's structure.

Causes of a bad blower motor casing assembly can include cracked or warped plastic from repeated heating and cooling cycles. The seals around the motor connection points may also deteriorate over time.

Symptoms include:

• Incomplete or overly long drying cycle times
• Water pooling in the bottom of the dishwasher after cycles
• Sloshing or excess moisture noise heard coming from inside
• Irregular or strange smells emanating from within the unit

This LG part is also compatible with some Kenmore models.

This locker lock is the replacement latch mechanism that secures the appliance door during operation, restoring proper door closure and helping the unit run safely and reliably. Use when a door won't stay closed or the machine won't start. What it does:

• Replaces a worn or broken door latch to restore secure door closure
• Helps ensure the appliance detects a closed door and can start cycles
• Commonly used when the door is loose, won't latch, or causes door-sensor errors
• Fits into the door strike area and engages the cabinet catch for a firm hold

• Locker lock (single replacement latch)

• Disconnect power and water supply before servicing to avoid shock or injury
• Remove the outer door panel or access cover as needed to reach the latch area
• Verify alignment of the latch and striker when reinstalling to ensure proper engagement

This door latch holder secures the microwave oven's door lock assembly so the door closes and latches reliably. Replacing a worn or broken holder restores proper door engagement and helps the unit start and operate safely. What it does:

• Secures the door lock/latch assembly to the oven frame so the door closes and stays latched
• Commonly replaced when the door feels loose, won't stay closed, or the oven doesn't start
• Works with the lock components to maintain proper door alignment and switch activation
• Helps prevent intermittent operation caused by a misaligned or damaged latch mount

• Basic hand tools required; access typically through the front control/door area—refer to model service instructions
• Power off and unplug the appliance before attempting any repair; disconnect power at the breaker if hardwired
• Handle door and latch components gently to avoid harming the door glass, switches, or wiring

Replacement stopper roller that helps guide and cushion a moving component so panels or doors run smoothly and quietly. Restores stable operation and reduces rubbing or binding. What it does:

• Guides and supports a moving panel or door to maintain alignment and smooth travel
• Cushions contact to reduce noise, vibration, and wear
• Prevents rubbing or binding that can lead to uneven movement or damage
• Common symptoms a bad stopper roller may cause: squeaking, grinding, sticking, or misaligned panels

• Disconnect power to the appliance before beginning any repair
• Remove any panels or trim blocking access; keep track of fasteners
• Replace the worn stopper roller with the exact part, secure fasteners, and confirm smooth movement

The Cover Assembly is an OEM component specifically designed for LG dishwashers. This assembly consists of the outer tub cover and inner mounted components that protect internal mechanisms.

Causes of a bad cover assembly can include cracks, dents, or other physical damage from regular loading and unloading of dishes. Harsh or abrasive cleaners can degrade protective surfaces over time as well. 

Symptoms of a bad cover assembly include:

• Water leaks inside or outside the dishwasher 
• Loose, unstable, or damaged outer tub cover
• Detached or broken mounting clips for inner components

This OEM LG part is also compatible with Sears/Kenmore dishwashers. Replacing the entire cover assembly restores integrity to protect sensitive inside parts. Proper maintenance extends the lifespan of exterior components.
 

This door boot gasket seals the opening between the door and tub on front-load washers, keeping wash water contained. Replacing a worn boot restores a tight seal to prevent leaks and ensure proper door closure.

• Creates a watertight seal between the washer door and front tub
• Helps prevent leaks, drips, and moisture at the front of the machine
• Common signs of failure: visible tears/cracks, persistent mildew, clothes snagging, or the door not sealing flush
• Restores correct door sealing to maintain efficient wash performance

• Unplug the washer and turn off water supplies before servicing
• Remove the outer and inner spring/clamp rings; note orientation of the gasket and drain port
• Lightly soap the lip to ease installation and align the drain/weep holes at the 6 o'clock position
• Reinstall clamps securely and run a short cycle to check for leaks

This blower cover is the outer housing piece that directs airflow from the blower assembly and protects the fan motor and internal components. It helps maintain proper airflow path and reduces contact with moving parts. What it does:

• Directs and channels airflow from the blower to the unit's vents for efficient circulation
• Protects the blower wheel and motor from debris and accidental contact
• Helps reduce rattling and vibration when the cover is intact and properly seated
• May cause decreased airflow or unusual noise if cracked, warped, or missing

• Disconnect power to the appliance before performing any service
• Typically installed with a few screws or clips after removing the front grill or access panel
• Handle plastic tabs gently to avoid breakage; align clips before tightening fasteners

The Drain Hose Assy is an OEM component specifically designed for LG dishwashers. This hose works with the drain pump to effectively drain wash water from the dishwasher tub after each cycle. 

The drain hose assy is responsible for efficiently draining wash water during and after the dishwashing cycle. It allows used water to be drained properly, keeping the dishwasher tub and components clean and dry between cycles. 

Symptoms of a bad drain hose assy include:

• Incomplete draining of wash water after cycles
• Water remaining or pooling in the bottom tub 
• Leaks or puddling near the drain pump or hose area
• Loud noises or vibrations from the drain pump

This OEM LG part is also compatible with select Sears/Kenmore.

This door gasket forms the airtight, watertight seal around the dishwasher tub opening. A fresh, pliable seal helps prevent leaks, reduce noise, and ensure proper wash performance by keeping water and steam inside the cabinet.

• Creates a continuous seal between the tub and door to prevent leaks
• Can help resolve water leaking from the sides or bottom of the door
• May improve door closure feel if the old seal is flattened, torn, or brittle
• Replacing a worn gasket can reduce cycle noise and moisture escaping during operation

• Unplug the dishwasher and shut off water supply before service
• Gently pull out the old gasket from the channel; clean the groove of debris and residue
• Press the new gasket evenly into the channel, keeping equal length on both sides and top
• Close the door and let the gasket settle; check for even compression and test for leaks

This hose connector links two components in the appliance's water path to create a flexible, leak-resistant connection. Replacing a worn or cracked connector helps stop leaks and restore proper water flow and performance.

• Joins fittings or assemblies within the internal water system
• Maintains a watertight seal under normal operating pressure
• Helps resolve leaks, pooling, or related error codes/performance issues
• Common failure signs: visible cracks, swelling, brittleness, or a loose fit at the connection points

• Disconnect power and shut off the water supply before servicing
• Note hose routing and orientation; take a photo for reference
• Transfer and correctly position any clamps; tighten securely without over-tightening
• After installation, run a test and inspect all joints for leaks

This connector assembly links a refrigerator's wiring harness to internal components, restoring a secure electrical connection for reliable operation and safe component communication. What it does

• Provides a secure plug connection between the wiring harness and internal modules or components
• Restores power/communication when a broken or damaged connector causes intermittent operation or failure
• Helps stop arcing, loose connections, and related error symptoms from faulty or corroded terminals
• Supports reliable signal transfer for sensors, lights, or control boards where used

• One connector assembly

• Disconnect power to the appliance before inspecting or replacing electrical connectors
• Handle wiring and terminals carefully to avoid bending pins or damaging insulation
• After installation, restore power and test affected functions for normal operation

The Drain Hose Assembly is an OEM component specifically designed for LG dishwashers. It safely directs wash water and waste from the dishwasher to a drain source such as the garbage disposal or vent pipe after each wash cycle.

Causes of failure typically include wear and tear over multiple years of daily use carrying hot, soapy water. Hoses can become weakened from kinking, impact damage or deterioration of plastics from chemical exposure. 

Symptoms of a bad drain hose include:

• Puddles or water leakage from the dishwasher 
• Inability to fully drain all wash water after cycles
• Damp containers inside from standing water issues

This OEM LG part is also compatible with select Sears/Kenmore dishwashers.

The Affresh Dishwasher Cleaner is an OEM accessory designed specifically for Whirlpool brand dishwashers. This citrus-scented tablet removes residue, odor-causing soils, and food particles from the dishwasher tub and gasket area during the cleaning cycle. Symptoms of a buildup include unwanted odors emanating from the dishwasher, especially after opening the door. Over time, residue and grime accumulate in hard-to-reach areas and provide an environment for mold and mildew growth.

Regular cleaning helps prevent this by removing leftover soils before they harden or encourage bacterial activity. The Affresh tablet utilizes a unique blend of cleaning ingredients that target soils and biofilms through a combination of powerful scrubbing action and natural cleaning enzymes.

As the #1 recommended dishwasher cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and select Kenmore dishwashers for consistent cleanliness and freshness. The package includes six tablets 4.2 ounces

This hinge reattaches and supports a refrigerator door, restoring proper alignment and smooth opening. It helps prevent sagging doors and uneven sealing that can affect cooling and energy use. What it does:

• Provides the pivot point that lets the appliance door open and close securely
• Restores correct door alignment to improve seal and reduce rattle
• Helps eliminate sagging, sticking, or uneven door movement
• Works as a direct replacement hinge when original is damaged or worn

• Disconnect power and empty door shelves before starting; follow OEM safety guidance
• Support the door while removing/installing the hinge to avoid dropping or damaging the door
• Use the correct fasteners and torque to secure the hinge; verify door alignment after installation

The Rack Assembly is an OEM part for LG dishwashers. It is the rack that holds dishes, glassware, utensils, and cookware during the wash cycle. 

Causes of a bad rack assembly can include normal wear and tear from years of use, such as bending or warping from heavy crockery loads. 

Symptoms of a bad dishwasher rack assembly include:

• Racks that no longer lay flat or slide smoothly 
• Difficulty loading large plates and pans
• Dishes falling over during the wash due to slanted racks
• Loose rocks that shift or don't remain secure inside the cavity

This OEM LG part is also compatible with Sears/Kenmore dishwashers. 

This hinge is the door pivot assembly that supports and guides a refrigerator/freezer door for smooth opening and reliable closing. Replacing a worn hinge restores proper door alignment and helps maintain an airtight seal. What it does:

• Supports the door weight and provides the pivot point for opening and closing
• Keeps the door aligned so the gasket seals correctly and the appliance cools efficiently
• Reduces door sag, rubbing, or uneven gaps that can cause drafts or cooling loss
• Stops hinge noise and binding caused by worn or damaged hinge components

• Unplug the appliance or shut off power to avoid electrical hazards before beginning
• Empty or support the door and shelves to prevent tipping or damage during removal
• Use proper tools and thread-lock or specified fastener torque where applicable

The Lower Dishrack Roller is an OEM part for LG dishwashers. This roller assists in the smooth movement and positioning of the lower dishrack during operation. It plays a key supportive role in organizing and accommodating dishes of various sizes and shapes.

Causes of a bad roller can include wear and tear from repeated use, damage from excess weight or impact, or accumulation of debris that hinders movement.

Symptoms of a bad lower dishrack roller include:

• The lower dishrack not sitting securely or sliding out of place.
• Difficulty opening or closing the lower basket.
• Excessive noise or vibration coming from the lower dishrack area.
• Dishes or silverware falling through gaps in the lower rack.

This LG part is also compatible with some Kenmore models.

This supporter hinge secures and supports a refrigerator/freezer door at the hinge point to keep the door aligned and operating smoothly. Replaces a worn or broken hinge to reduce sagging and uneven door closure. What it does:

• Provides structural support where the door meets the cabinet to maintain proper door alignment
• Helps the door open and close smoothly by stabilizing the hinge assembly
• Commonly used when door sags, binds, or does not seal properly
• Works with the cabinet hinge assembly to prevent excess wear on door seals and gaskets

• 1 supporter hinge

• Unplug the appliance or disconnect power before starting any repair
• Support the door while removing/installing the hinge to prevent dropping or damage
• Retain and reuse any original screws if undamaged, or replace with OEM-specified fasteners

This supporter hinge is a replacement hinge support bracket that helps secure and align the appliance door so it opens and closes smoothly. It restores proper hinge positioning to reduce door sag and uneven sealing. What it does:

• Secures the door hinge assembly and provides a stable mounting point
• Helps maintain door alignment to improve sealing and reduce gaps
• Reduces door sag and uneven wear on hinge components
• Restores smooth door movement and consistent closing

• One supporter hinge / hinge support bracket

• Disconnect power to the appliance before starting any repair
• Remove the door per the service manual instructions to access the hinge support
• Use appropriate hand tools and keep fasteners organized for reassembly
• Do not overtighten mounting screws; adjust hinge alignment as needed after installation

The Holder is an OEM part for LG dishwashers. This clip is designed to secure the tine rows in place, ensuring that your dishes and utensils are held securely during the washing cycle. It provides a reliable hold for the tine rows, preventing them from shifting or falling out during operation.

Symptoms of a bad retainer clip include:

• Loose or wobbly tine rows
• Difficulty in loading or unloading dishes
• Missing or lost retainer clips

A bad retainer clip can occur due to wear and tear, damage, or loss. If you notice symptoms such as loose or wobbly tine rows, difficulty in loading or unloading dishes, or missing retainer clips, it's time to replace the the faulty or missing retainer clip with this genuine OEM part.

This OEM LG part can also be used on Kenmore/Sears appliances. 
 

The Holder is an OEM part for  LG dishwashers. It is a mounting bracket or clip located inside the dishwasher that securely holds racks, baskets and other accessories in place during wash cycles. The holder plays a supporting role, making sure dishes and utensils are stabilized for cleaning.

Causes of a bad holder typically include breakage or cracks in plastic mounting clips from repeated uses. Fatigue of metal brackets may also occur over time due to vibrations.

Symptoms of a bad holder can include:

• Accessories that no longer stay firmly fixed in position during the wash cycle
• Items may dislodge or racks may become loose

This LG part is also compatible with some Kenmore models.

The Holder is an OEM part for LG dishwashers. This clip is designed to secure the tine rows in place, ensuring that your dishes and utensils are held securely during the washing cycle. It provides a reliable hold for the tine rows, preventing them from shifting or falling out during operation.

Symptoms of a bad retainer clip include:

• Loose or wobbly tine rows
• Difficulty in loading or unloading dishes
• Missing or lost retainer clips

A bad retainer clip can occur due to wear and tear, damage, or loss. If you notice symptoms such as loose or wobbly tine rows, difficulty in loading or unloading dishes, or missing retainer clips, it's time to replace the faulty or missing retainer clip with this genuine OEM part.

This LG replacement part is also compatible with Sears/Kenmore models.
 

The Rack Assembly is an OEM part for LG dishwashers. It is responsible for providing adjustable shelf space in the upper section of the dishwasher, allowing for versatile loading of dishes, glasses, and other washable items.

Causes of a bad upper rack assembly can include damage or wear to the adjustable components over time, cracks or breaks in the plastic structure, or issues with proper mounting or installation that cause stability problems.

Symptoms of a bad upper rack assembly include:

• Dishes not being properly washed in the upper rack section
• Items falling through or between the prongs/rails during the cycle
• The rack sliding or collapsing inward during washing

This OEM LG part is also compatible with some Kenmore models.

This wire rack restores stable support and organization inside your appliance, letting you load items securely and slide them in and out smoothly. It's a direct-fit replacement when the original rack is bent, broken, or missing. What it does:

• Provides stable shelving for cookware, dishes, or internal components depending on application
• Restores smooth sliding and load support when original rack rails or wires are damaged
• Helps prevent items from shifting or contacting internal walls/heating elements
• Commonly replaced when rack wires are bent, rusted, or mounting tabs break

• One replacement wire rack as shown

• Turn off and unplug the appliance (or disconnect power) before starting any repair
• Remove surrounding components or shelves as needed to access mounting points
• Align rack mounting tabs with support slots and seat fully; secure any retainers or clips
• If rust or other damage is present on surrounding supports, inspect and repair to prevent repeat failure

This replacement parts assembly restores the original sub-assembly function in compatible LG appliances, letting the appliance operate as designed. Use it when a worn or damaged internal assembly is preventing normal operation. What it does:

• Replaces a damaged or worn internal sub-assembly to restore proper operation
• Addresses symptoms such as intermittent operation, a component not responding, or unusual noises coming from the affected area
• Restores mechanical or electrical connections within the appliance where this assembly is used
• Useful when disassembly reveals broken clips, connectors, or mounting features on the original part

• Disconnect power and water (if applicable) before beginning any repair
• Keep all mounting hardware and connectors; some may need to be reused

This roller assembly supports and helps the dryer drum turn smoothly, reducing noise and wear. Replace a worn roller to restore stable drum rotation and quieter operation. What it does:

• Supports the dryer drum so it spins evenly during drying cycles
• Reduces scraping, grinding or thumping noises caused by worn rollers
• Helps prevent excessive drum wobble that can stress the motor and belt
• Restores proper drum alignment to improve overall operation

• Disconnect power before starting any repair to avoid shock or injury
• Access usually requires removing the dryer cabinet or front panel — follow your model's service guide
• Inspect the belt and adjacent rollers for wear and replace if needed

This roller assembly supports the dryer drum and helps it turn smoothly, reducing noise and wear. Replacing a worn roller restores quieter operation and proper drum rotation. What it does

• Supports the dryer drum and maintains correct drum alignment while spinning.
• Reduces rubbing, grinding, or squeaking caused by worn drum support.
• Helps prevent uneven drum rotation that can lead to belt wear or poor tumbling.
• Restores smooth drum movement for more efficient drying.

• Disconnect power (and gas supply for gas dryers) before starting any repair.
• Access may require removing the dryer top or front panel; keep track of fasteners and clips.
• Inspect related parts (other rollers, bearing pads, drum glides, and belt) and replace if worn.

The Tine Row Holder is an OEM part for LG dishwashers. It is a molded plastic bracket located inside the dishwasher that firmly holds the horizontal tine rows of the upper spray arm assembly in place. Subject to vibrations during the wash cycle, the tine row holder must securely grip this assembly.

Symptoms of a bad tine row holder include:

• Loosened or detached upper spray arm that causes insufficient washing 
• Rattling noises from loose components inside the tub 
• Potential leaks if the plastic material cracks fully over time

Causes of failure can include cracking of the holder plastic from solvent exposure and mineral buildup over thousands of wash cycles. Replace with this OEM LG part to ensure balanced water distribution to all areas of dishes. It is also compatible with Sears/Kenmore dishwasher models.

The Noise Filter Assembly is an OEM part for LG dishwashers. It is designed to reduce electrical noise and interference that can affect the dishwasher's operation. The noise filter helps ensure that the electronic components function smoothly and without disruption, contributing to the overall efficiency and reliability of the appliance.

Causes of a bad noise filter assembly can include electrical surges, wear and tear over time, or damage due to moisture or physical impact.  

Symptoms of a bad noise filter assembly include:

• The dishwasher not starting or stopping unexpectedly
• Error codes related to electrical issues
• Intermittent power loss during a cycle
• Unusual noises coming from the control panel area

This OEM LG part is also compatible with some Kenmore models.

This wire rack assembly replaces a damaged or worn shelf to support items inside the appliance and restore organized storage and stable loading. Durable coated wire construction resists bending and helps keep items secure during use. What it does:

• Provides a stable support surface for dishes, cookware, or stored items
• Replaces bent, rusted, or broken rack sections that cause items to tip or slide
• Restores proper alignment so drawers or racks glide smoothly
• Helps prevent contact damage by keeping items off interior surfaces

• One rack assembly

• Disconnect power and, if applicable, turn off the water supply before beginning
• Remove existing rack or trim pieces per the appliance's service instructions
• Handle edges carefully; coated wire can have sharp ends where broken
• If the rack uses rollers or clips, inspect and replace any worn hardware for best fit

This is a replacement interior tray that holds items and helps contain spills and crumbs inside the appliance. It restores a stable surface where the original tray was cracked, warped, or missing. What it does:

• Provides a flat, stable surface for cookware, food containers, or components
• Helps catch drips, crumbs, and minor spills to keep the appliance interior cleaner
• Replaces damaged, cracked, or warped trays that no longer sit level
• Restores proper part alignment so other components that rest on the tray function correctly

• One replacement interior tray

• Handle carefully to avoid scratching or chipping; wear gloves if needed
• Disconnect power to the appliance before working in or around electrical components
• If any mounting clips or fasteners are missing or damaged, replace them per the OEM manual

Incudes latch and safety switches.

This genuine replacement gasket restores a tight, reliable seal between mating parts in your appliance to prevent leaks and performance loss. Replacing a worn or damaged gasket helps stop moisture intrusion and keeps the unit operating as designed.

• Forms a compressible barrier to keep air or water from escaping at the joint
• Helps maintain proper operation and efficiency by preserving the intended seal
• Common failure signs: leaks or drips, visible cracks/tears or flattening, hardening/brittleness, or gaps that won't stay closed

• Disconnect power and, if applicable, shut off the water supply before service
• Clean and dry all sealing surfaces; remove old residue or adhesive
• Seat the gasket evenly without stretching; press for full contact all around
• Let the gasket relax at room temperature (or warm slightly) to ease fit, then check the seal after reassembly

This outer door frame restores the appliance's front trim for proper fit and finished appearance. It replaces damaged or worn trim to help the door close evenly and maintain a clean look. What it does

• Replaces the outer door frame trim to restore correct alignment and sealing.
• Secures the door assembly and helps prevent gaps that can cause drafts or heat loss.
• Eliminates cosmetic damage like cracks, dents, or warped trim for improved appearance.
• Can reduce rattling or noisy operation caused by a loose or broken frame.

• Disconnect power to the appliance before starting any repair.
• Remove the door or access panels per the service manual to reach mounting screws—keep track of fasteners.
• Handle trim and any attached glass carefully to avoid breakage or injury.

This genuine replacement rack restores shelf storage and organization in compatible refrigerators, providing a stable surface for food and containers. It replaces cracked, bent, or missing racks to help your fridge hold items securely. What it does

• Provides a stable shelving surface for food, containers, and beverages
• Replaces racks that are cracked, bent, or no longer supporting weight
• Prevents items from shifting or falling inside the refrigerator
• Restores usable storage space and proper organization

• One replacement rack

• Remove all food and containers from the area before installing
• Slide or lift out the old rack per the appliance's service instructions; then position and secure the replacement rack in the same location
• Use caution to avoid pinching fingers; wear gloves if edges are sharp

This genuine replacement rack restores a stable platform for cookware and bakeware so items sit level and heat circulates properly. Use it to replace a bent or missing oven/range rack and keep cooking performance consistent. What it does:

• Provides a sturdy shelf for pots, pans, and baking sheets
• Maintains proper spacing for even heat circulation during baking or roasting
• Replaces bent, warped, or rusted racks that cause uneven cooking or unstable loads
• Helps prevent cookware from tipping or slipping when sliding in and out

• Install rails or rack in the appliance only when cool; use gloves to avoid sharp edges
• Slide rack into existing oven/range guides until fully seated; ensure correct orientation
• Do not modify the rack; use only as intended by the appliance manufacturer

Restore the second-level cooking surface inside your microwave. This interior cooking rack sits on the factory support hooks to elevate dishes for certain cycles, replacing a lost, bent, or chipped rack so cookware stays level and heats properly. What it does:

• Creates a second cooking level when your model calls for it
• Elevates dishes above the turntable for multi-item reheating or convection/grill use
• Replaces a rack that is missing, bent/wobbly, or has damaged coating that may cause arcing
• Seats in designated support positions to maintain proper clearances

• 1 cooking rack

• Disconnect power before cleaning or servicing; handle carefully to avoid chipping the coating
• Position only on the designated support hooks; ensure it is level and not touching cavity walls
• Use strictly as directed in your model's owner's manual
• Discontinue use and replace if arcing occurs or the rack is damaged

This upper dishwasher rack replaces a worn or damaged rack to restore safe, stable support for dishes and glassware during wash cycles. It provides proper spacing and alignment so items clean evenly and stay protected. What it does

• Holds plates, cups and lightweight dishware in the dishwasher's upper loading area
• Restores missing or broken tines and support that can cause items to shift or tip
• Helps maintain correct spray coverage for consistent cleaning results
• Reduces risk of chipping or scratching by keeping items separated

• One upper dishwasher rack

• Designed for drop-in replacement; remove lower rack and slide out upper rack guides as needed
• Inspect and replace any damaged rollers or rail clips at the same time for smooth operation
• Disconnect power and follow manufacturer guidelines when accessing internal components

This water guide directs and supports water flow inside the refrigerator to the dispenser or ice-making path, helping ensure consistent delivery and reducing misdirected leaks. It's a small plastic channel used where tubing or water needs routing. What it does

• Guides and stabilizes the water flow path between the supply tubing and dispenser or ice-maker components
• Helps prevent water from spraying or pooling by keeping the line aligned
• Can stop intermittent leaks caused by misrouted tubing or broken guide clips
• Reduces vibration-related noise by supporting tubing in place

• One water guide

• Disconnect power and turn off the water supply before installing
• Replace only with the exact replacement part; inspect adjacent tubing and seals while open
• Handle the guide gently to avoid cracking the plastic; use basic hand tools only

The Nozzle Assembly is an OEM component specifically designed for LG dishwashers. It is a crucial part of the wash arm assembly, responsible for spraying water throughout the dishwasher during cycles. 

Causes of a bad nozzle assembly can include mineral buildup, clogs from food debris, or cracks/splitting from repeated thermal cycling.

Symptoms of a bad nozzle assembly include:

• Ineffective or uneven spraying coverage 
• Dirty dishes despite running cycles
• Splashing or water leaks from wash arm area
• Reduced water pressure 

This OEM LG part is also compatible with select Sears/Kenmore dishwashers.

This holder is a small support bracket that secures an internal component to the appliance chassis, restoring proper alignment and reducing noise or movement. It's a simple replacement that helps maintain reliable operation. What it does

• Secures and supports an internal assembly to the appliance frame
• Prevents unwanted movement, vibration, and rattling of components
• Helps maintain proper alignment for connected parts and fasteners
• Can resolve intermittent contact or noise caused by a loose/missing bracket

• One holder as shown

• Disconnect power before starting any repair to avoid shock or injury
• Installation typically requires basic hand tools; keep fasteners for reuse unless damaged
• Handle sharp sheet-metal edges carefully and avoid forcing parts into place
• Refer to the appliance's service manual or OEM instructions for proper location and torque specs

A complete control panel assembly that houses the oven/range user interface, buttons and display so you can restore control and feedback from the appliance. Replaces a damaged, cracked, or unresponsive front control module. What it does:

• Provides the user-facing buttons, touchpad or membrane switches and display used to select cycles and functions
• Sends user commands to the main control board and displays status, time, and error codes
• Common symptom fix: unresponsive or stuck buttons, missing/blank display, or incorrect input recognition
• Restores a secure, factory-fit front control surface and mounting points for reliable operation

• One complete control panel assembly

• Disconnect power (unplug or shut off breaker) before starting any work
• Handle the display/overlay gently to avoid scratching or damaging circuitry
• Remove trim and housing per service instructions to access connectors; note screw locations for reassembly

The Display Panel is an OEM part for LG dishwashers. This display panel is responsible for conveying important information about the wash cycle as well as enabling cycle and option selection. 

Causes of a bad display panel can include damage to the screen or buttons from accidental impact or liquid, failure of electronic components responsible for powering and communicating with the control board, or general wear and tear over time.

Symptoms of a bad display panel include:

• Buttons and/or screen not functioning properly
• Inability to select wash cycles or options
• Flickering, fading, or unresponsive display
• Electrical shortages or random operational issues

This LG part is also compatible with some Kenmore models.

The Dishwasher Inlet Valve is an OEM part for LG dishwashers. This valve controls the flow of water into the dishwasher, opening to allow water in at the start of the wash cycle and closing to prevent any further water entry once the desired level is reached. It ensures that the dishwasher receives the correct amount of water for optimal cleaning performance.

Causes of a bad inlet valve can include mineral deposits or debris clogging the valve, electrical issues, or general wear and tear from prolonged use. A malfunctioning valve can lead to improper water levels and potential flooding.

Symptoms of a bad dishwasher inlet valve include:

• The dishwasher not filling with water
• Water entering the dishwasher even when it is turned off
• Incomplete or prolonged wash cycles
• Leaks or puddles of water under the dishwasher

This OEM LG part is also compatible with Sears/Kenmore models.

A replacement damper assembly that controls airflow between compartments to help the refrigerator maintain proper temperatures. Restores the air pathway so the fresh food and freezer sections cool more consistently. What it does:

• Regulates airflow between freezer and fresh-food compartments for balanced cooling
• Stops or reduces abnormal clicking or air-flap noises when the damper motor is stuck
• Re-establishes proper airflow after a damaged or broken damper prevents opening/closing

• Disconnect power before beginning work to avoid electrical shock
• Handle surrounding trim and shelves carefully; some panels may need removal to access the damper
• Verify fit and orientation against the original part; do not force the new assembly into place

Right side

The Rail Assembly is an OEM part for LG dishwashers. It is a part that supports and guides the motion of the dish racks in and out of the dishwasher. The rail assembly is designed with precision fits and smooth surfaces to allow easy extension and retraction of the racks.

Causes of a bad dishwasher rail assembly can include wear and deterioration over time, damage from heavy loads that put stress on the rails, or impact damage from accidental handling.

Symptoms of a bad rail assembly include:

• Difficulty extending or retracting the dish racks
• Noisy or grinding sounds when operating the racks
• Misalignment of the racks that causes dishes to rub or stop moving properly
• Leaks or pooling of water inside the dishwasher door

This LG part is also compatible with some Kenmore models.

The Display PCB Assembly is an OEM replacement part for LG dishwashers. It is the circuit board located within the control panel that operates the digital display interface. The PCB processes signals to illuminate touch buttons and cycle indicators, showing status updates at each stage of the wash.

Symptoms of a faulty display PCB include:

• Blank or unresponsive control display screen
• Inability to select wash cycles or options  
• Touch buttons not activating functions properly
• Flashing error codes or abnormal display messages

Causes of a bad PCB can be moisture damage, component failures over time, or electrical damage from power surges. 

This precision-engineered LG replacement is compatible with select Kenmore Elite models.

This front PCB assembly is the electronic control board that manages user inputs and front-panel functions, restoring responsive controls and display operation. Use it to replace a failed or unresponsive front control board and recover normal panel behavior. What it does:

• Sends and receives signals between the control panel and the appliance for cycle selection and status display
• Re-establishes responsive push-button/touch input and display/LED feedback
• Stops intermittent or total control-panel failures that cause unresponsive controls or wrong display indications
• Works as the primary front-facing electronics for user interface and front-end diagnostics

• Disconnect power before starting; follow all safety precautions to avoid shock
• Handle the board by its edges and avoid touching components; protect against electrostatic discharge (ESD)
• Retain all mounting hardware and note cable/connector positions for correct reinstallation

This factory parts assembly replaces a damaged or failed component assembly to restore proper operation and control. It's a direct-fit replacement made to the original manufacturer's specification for reliable performance. What it does:

• Replaces the failed assembly that can cause power, control, or function failures
• Restores responsive controls and normal operation when the original assembly is malfunctioning
• Addresses symptoms such as intermittent power, unresponsive controls, or errors tied to the assembly
• Works as a direct OEM-fit replacement when installed correctly

• One parts assembly

• Disconnect power and water before starting any repair
• Use appropriate tools and avoid forcing connectors or fasteners
• Retain and reuse mounting hardware only if undamaged; replace damaged fasteners

The Leg is an OEM part for LG dishwashers. It serves as a critical base component that elevates the dishwasher body above the floor for proper drainage. Legs are constructed with durable corrosion-resistant materials and adjustable height features to accommodate most flooring types. 

Symptoms of a bad leg can include:

• The dishwasher wobbles or is uneven during operation
• Standing water or improper draining of wash water  
• Visible damage like cracks, bending, or rust affecting stability

Causes of leg failure typically arise from normal wear over extended use of hard flooring. Replacing deteriorated legs restores the appliance's security and balance for optimum performance.

This affordable OEM LG part ensures the dishwasher stays firmly in place during cycles while conveniently adjusting to most installation situations. It provides customers with many more trouble-free years of use. This replacement leg is also compatible with KitchenAid models.

The Affresh Dishwasher Cleaner is an OEM accessory designed specifically for Whirlpool brand dishwashers. This citrus-scented tablet removes residue, odor-causing soils, and food particles from the dishwasher tub and gasket area during the cleaning cycle. Symptoms of a buildup include unwanted odors emanating from the dishwasher, especially after opening the door. Over time, residue and grime accumulate in hard-to-reach areas and provide an environment for mold and mildew growth.

Regular cleaning helps prevent this by removing leftover soils before they harden or encourage bacterial activity. The Affresh tablet utilizes a unique blend of cleaning ingredients that target soils and biofilms through a combination of powerful scrubbing action and natural cleaning enzymes.

As the #1 recommended dishwasher cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and select Kenmore dishwashers for consistent cleanliness and freshness. The package includes six tablets 4.2 ounces