Parts for Lg LDT7797BD/00: Upper Rack Assembly Parts

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

This lower frame is the factory replacement trim piece that mounts to the base of the appliance door/cabinet, restoring proper fit and finished appearance. It helps protect the lower edge and keeps the door aligned. What it does:

• Replaces a dama

Detergent and rinse aid dispenser

Replacement door handle assembly for your dishwasher. Restores secure grip and smooth opening. Needed when original handle is cracked, loose, or broken.

Secures dishwasher to countertop or cabinet to prevent tipping. Includes mounting brackets for stable installation. Replace if broken, missing, or worn.

This factory-assembled replacement installs in the same location as the original assembly on your appliance. It restores proper fit and operation when the original component is broken, worn, or missing.

• Replaces the complete assembly specified f

Small sleeve bushing that supports pivoting or rotating joints in your dishwasher. Replace when worn, cracked, or causing excess friction between moving parts.

A replacement hinge spring that restores proper door tension and alignment for smooth opening and closing. Helps correct sagging or uneven door movement so the door seals and operates reliably when installed correctly. What it does:

• Provides ten

The Dishwasher Door Cable Connector Assembly is an OEM replacement part for LG dishwasher. The cable connector assembly works with the door cable to properly guide and support the door as it moves through the full range of opening and closing motions.&

This drum roller supports the dryer drum for smooth rotation and quieter operation. Replacing a worn roller helps reduce noise and drum wobble so the dryer runs more reliably. What it does:

• Supports the drum rim and allows the drum to spin smoot

The WATER LEVEL SENSOR ASSEMBLY is an OEM component specifically designed for LG dishwashers. It is an electronic sensor responsible for monitoring and detecting the water level inside the dishwasher tub during each cycle. Precise water level detection

Check valve that prevents water backflow in the appliance's supply line, helping restore proper water flow to the ice maker or dispenser. Replaces a failed valve to address leaking, slow fills, or no-fill conditions. What it does:

• Stops reverse

The Diverter Motor Assembly is an OEM part for LG dishwashers. It is a critical component used to control the direction of water flow within the dishwasher, ensuring that water is properly diverted between the different spray arms during various wash c

The Micro Switch is an OEM part for LG dishwashers. It plays a crucial role in detecting when the door is securely closed prior to starting a cycle. This important safety feature prevents accidental exposure to hot water, detergent, and chemicals. 

Replace your dishwasher's damaged or cracked front cover assembly. This panel attaches to the outer door for a clean appearance and structural support.

Dishwasher not draining, making loud humming or whining noises, or showing HE error code? The circulation pump assembly is likely the issue. DIY-friendly.

Fix visible cracks or damage to your dishwasher's base enclosure with this lower cover assembly. Houses motor and pump components securely.

This guide assembly is the sliding rail that supports and aligns the freezer drawer. When worn or damaged, it can cause sticking, sagging, or poor sealing; replacing it restores smooth operation and proper drawer closure.

• Supports the freezer dr

This inlet hose directs the incoming water supply into the appliance so it can fill and operate properly. Replacing a damaged or worn inlet hose restores a secure water connection and helps prevent leaks and fill issues. What it does:

• Channels h

A small snap-on trim cap used to cover and protect exposed fasteners or openings, restoring the appliance's finished appearance and helping keep debris out of the cavity. What it does

• Covers and conceals exposed screw heads or shaft

The Drain Pump Case Assembly is an OEM replacement part for LG dishwashers. This component houses the drain pump, which is responsible for removing water from the dishwasher tub during the drain cycle.

Causes of a bad drain pump case assembly c

The Lower Spray Arm is an OEM part for LG dishwashers. It is responsible for cleaning dishes positioned in the lower rack through its rotating spray of water.

Causes of failure can be mineral or limescale buildup inhibiting rotation, broken or

The Shaft,Nozzle is an OEM part for LG dishwashers. This part is located inside the dishwasher's spray arm assembly and is responsible for distributing water to the spray arms during the wash cycle.

Causes of failure can be mineral deposits

The Fill Funnel Gasket is an OEM part for LG dishwashers. It is located inside the fill funnel that pours water into the dishwasher during cycles. The gasket seals around the fill funnel to prevent leaks and direct water as intended. 

Symp

Fixes poor cleaning and spotty dishes caused by weak water spray. This dishwasher spray nozzle assembly restores proper water distribution. Moderate DIY.

Fix poor cleaning or weak spray with a new dishwasher spray arm manifold. Distributes water to all spray arms for complete dish coverage. DIY repair.

Captures food particles and debris to maintain proper water flow. Replace when clogged or damaged to restore filtering performance. Confirm fit with your model.

This refrigerator water filter cartridge helps reduce common impurities and improves the taste and clarity of drinking water and ice. It's a direct-replacement style designed to fit compatible LG refrigerator filter housings. What it does

• Reduce

This replacement wire rack restores secure storage and organization inside your appliance so dishes, pans, or food items sit stable and move smoothly. It replaces worn, bent, or damaged shelving to help maintain normal loading. What it does

• Prov

This case assembly is the outer housing that holds and protects the appliance's control components and switches, restoring a finished appearance and keeping electronics secure. It's a direct-replacement style part for visible control areas. What it does:

This safety switch assembly replaces a failed door/interlock switch to restore the appliance's ability to detect and respond to door position, helping ensure cycles only run when the door is closed. Fits as a direct replacement for the original switch ass

This Door Seal is an OEM part for LG dishwashers. It plays a crucial role in preventing water leaks by creating a watertight seal around the dishwasher door. 

Over time, door seals can degrade due to constant exposure to water, detergents,

This parts assembly is a direct-replacement assembly used to restore the original mechanical/electrical components it contains so the appliance can operate as designed. It replaces a worn or damaged assembly to help resolve related failures. What it does

This parts assembly is a factory-style replacement component designed to restore the original function of the affected subsystem. Use it to replace a damaged or failed assembly and return the appliance to normal operation. What it does

• Replaces

The Rail Assembly is an OEM part for LG dishwashers. This rail assembly supports the upper dish rack and guides it smoothly in and out of the dishwasher.

Causes of a bad rail assembly include wear from repeated rack extension and retraction ove

Holds utensils and small items upright in your dishwasher's lower rack. Replace if the basket is cracked, broken, or missing prongs that no longer secure items.

The Blower Motor Casing Assembly is an OEM part for LG dishwashers. This part houses the blower motor which generates airflow through the wash arms and drying vent. The casing is precision-engineered to fit securely within the dishwasher's structur

This locker lock is the replacement latch mechanism that secures the appliance door during operation, restoring proper door closure and helping the unit run safely and reliably. Use when a door won't stay closed or the machine won't start. What it does:

This door latch holder secures the microwave oven's door lock assembly so the door closes and latches reliably. Replacing a worn or broken holder restores proper door engagement and helps the unit start and operate safely. What it does:

• Secures

Stopper roller guides and cushions dishwasher panels for smooth, quiet operation. Replace if door binds, rubs, or moves unevenly. Confirm fit with your model.

The Cover Assembly is an OEM component specifically designed for LG dishwashers. This assembly consists of the outer tub cover and inner mounted components that protect internal mechanisms.

Causes of a bad cover assembly can include cracks, den

This door boot gasket seals the opening between the door and tub on front-load washers, keeping wash water contained. Replacing a worn boot restores a tight seal to prevent leaks and ensure proper door closure.

• Creates a watertight seal between

This blower cover is the outer housing piece that directs airflow from the blower assembly and protects the fan motor and internal components. It helps maintain proper airflow path and reduces contact with moving parts. What it does:

• Directs and

The Drain Hose Assy is an OEM component specifically designed for LG dishwashers. This hose works with the drain pump to effectively drain wash water from the dishwasher tub after each cycle. 

The drain hose assy is responsible for efficie

Creates a watertight seal around the dishwasher tub opening. Replace if you notice leaks, excess noise, or poor wash performance. Confirm fit with your model.

This hose connector links two components in the appliance's water path to create a flexible, leak-resistant connection. Replacing a worn or cracked connector helps stop leaks and restore proper water flow and performance.

• Joins fittings or assem

Fix dishwasher electrical issues with this wire harness connector assembly. Restores secure electrical connections between internal components.

The Drain Hose Assembly is an OEM component specifically designed for LG dishwashers. It safely directs wash water and waste from the dishwasher to a drain source such as the garbage disposal or vent pipe after each wash cycle.

Causes of failur

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

This hinge reattaches and supports a refrigerator door, restoring proper alignment and smooth opening. It helps prevent sagging doors and uneven sealing that can affect cooling and energy use. What it does:

• Provides the pivot point that lets the

The Rack Assembly is an OEM part for LG dishwashers. It is the rack that holds dishes, glassware, utensils, and cookware during the wash cycle. 

Causes of a bad rack assembly can include normal wear and tear from years of use, such as bend

This hinge is the door pivot assembly that supports and guides a refrigerator/freezer door for smooth opening and reliable closing. Replacing a worn hinge restores proper door alignment and helps maintain an airtight seal. What it does:

• Supports

Replacement roller for dishwasher lower rack. Installs on the dishrack axle to enable smooth gliding. Replace if cracked, broken, or missing.

This supporter hinge secures and supports a refrigerator/freezer door at the hinge point to keep the door aligned and operating smoothly. Replaces a worn or broken hinge to reduce sagging and uneven door closure. What it does:

• Provides structural support where the door meets the cabinet to maintain proper door alignment
• Helps the door open and close smoothly by stabilizing the hinge assembly
• Commonly used when door sags, binds, or does not seal properly
• Works with the cabinet hinge assembly to prevent excess wear on door seals and gaskets

• 1 supporter hinge

• Unplug the appliance or disconnect power before starting any repair
• Support the door while removing/installing the hinge to prevent dropping or damage
• Retain and reuse any original screws if undamaged, or replace with OEM-specified fasteners

This supporter hinge is a replacement hinge support bracket that helps secure and align the appliance door so it opens and closes smoothly. It restores proper hinge positioning to reduce door sag and uneven sealing. What it does:

• Secures the door hinge assembly and provides a stable mounting point
• Helps maintain door alignment to improve sealing and reduce gaps
• Reduces door sag and uneven wear on hinge components
• Restores smooth door movement and consistent closing

• One supporter hinge / hinge support bracket

• Disconnect power to the appliance before starting any repair
• Remove the door per the service manual instructions to access the hinge support
• Use appropriate hand tools and keep fasteners organized for reassembly
• Do not overtighten mounting screws; adjust hinge alignment as needed after installation

The Holder is an OEM part for LG dishwashers. This clip is designed to secure the tine rows in place, ensuring that your dishes and utensils are held securely during the washing cycle. It provides a reliable hold for the tine rows, preventing them from

The Holder is an OEM part for  LG dishwashers. It is a mounting bracket or clip located inside the dishwasher that securely holds racks, baskets and other accessories in place during wash cycles. The holder plays a supporting role, making sure dis

Secures tine rows in place on your dishwasher rack. Replace if the clip is cracked, broken, or missing to keep tines from shifting or falling out.

The Rack Assembly is an OEM part for LG dishwashers. It is responsible for providing adjustable shelf space in the upper section of the dishwasher, allowing for versatile loading of dishes, glasses, and other washable items.

Causes of a bad upp

This wire rack restores stable support and organization inside your appliance, letting you load items securely and slide them in and out smoothly. It's a direct-fit replacement when the original rack is bent, broken, or missing. What it does:

• Pr

This replacement parts assembly restores the original sub-assembly function in compatible LG appliances, letting the appliance operate as designed. Use it when a worn or damaged internal assembly is preventing normal operation. What it does:

• Rep

This roller assembly supports and helps the dryer drum turn smoothly, reducing noise and wear. Replace a worn roller to restore stable drum rotation and quieter operation. What it does:

• Supports the dryer drum so it spins evenly during drying cy

This roller assembly supports the dryer drum and helps it turn smoothly, reducing noise and wear. Replacing a worn roller restores quieter operation and proper drum rotation. What it does

• Supports the dryer drum and maintains correct drum alignm

The Tine Row Holder is an OEM part for LG dishwashers. It is a molded plastic bracket located inside the dishwasher that firmly holds the horizontal tine rows of the upper spray arm assembly in place. Subject to vibrations during the wash cycle, the ti

The Noise Filter Assembly is an OEM part for LG dishwashers. It is designed to reduce electrical noise and interference that can affect the dishwasher's operation. The noise filter helps ensure that the electronic components function smoothly and w

This wire rack assembly replaces a damaged or worn shelf to support items inside the appliance and restore organized storage and stable loading. Durable coated wire construction resists bending and helps keep items secure during use. What it does:

<

This is a replacement interior tray that holds items and helps contain spills and crumbs inside the appliance. It restores a stable surface where the original tray was cracked, warped, or missing. What it does:

• Provides a flat, stable surface for cookware, food containers, or components
• Helps catch drips, crumbs, and minor spills to keep the appliance interior cleaner
• Replaces damaged, cracked, or warped trays that no longer sit level
• Restores proper part alignment so other components that rest on the tray function correctly

• One replacement interior tray

• Handle carefully to avoid scratching or chipping; wear gloves if needed
• Disconnect power to the appliance before working in or around electrical components
• If any mounting clips or fasteners are missing or damaged, replace them per the OEM manual

Incudes latch and safety switches.

Replace your dishwasher door gasket to stop leaks and restore a watertight seal. Install when water escapes during cycles. Confirm fit with your model.

This outer door frame restores the appliance's front trim for proper fit and finished appearance. It replaces damaged or worn trim to help the door close evenly and maintain a clean look. What it does

• Replaces the outer door frame trim to restor

This genuine replacement rack restores shelf storage and organization in compatible refrigerators, providing a stable surface for food and containers. It replaces cracked, bent, or missing racks to help your fridge hold items securely. What it does

This genuine replacement rack restores a stable platform for cookware and bakeware so items sit level and heat circulates properly. Use it to replace a bent or missing oven/range rack and keep cooking performance consistent. What it does:

• Provid

Restore the second-level cooking surface inside your microwave. This interior cooking rack sits on the factory support hooks to elevate dishes for certain cycles, replacing a lost, bent, or chipped rack so cookware stays level and heats properly. What it does:

• Creates a second cooking level when your model calls for it
• Elevates dishes above the turntable for multi-item reheating or convection/grill use
• Replaces a rack that is missing, bent/wobbly, or has damaged coating that may cause arcing
• Seats in designated support positions to maintain proper clearances

• 1 cooking rack

• Disconnect power before cleaning or servicing; handle carefully to avoid chipping the coating
• Position only on the designated support hooks; ensure it is level and not touching cavity walls
• Use strictly as directed in your model's owner's manual
• Discontinue use and replace if arcing occurs or the rack is damaged

This upper dishwasher rack replaces a worn or damaged rack to restore safe, stable support for dishes and glassware during wash cycles. It provides proper spacing and alignment so items clean evenly and stay protected. What it does

• Holds plates,

This water guide directs and supports water flow inside the refrigerator to the dispenser or ice-making path, helping ensure consistent delivery and reducing misdirected leaks. It's a small plastic channel used where tubing or water needs routing. What i

Dishes not getting clean or water not spraying properly? This dishwasher nozzle assembly sprays water during wash cycles. Moderately easy DIY repair.

Support bracket that secures internal components to the dishwasher chassis. Replace if bracket is cracked, broken, or missing to restore proper alignment.

Fix an unresponsive or cracked dishwasher control panel with this complete assembly. Restores buttons, display, and touchpad functionality.

The Display Panel is an OEM part for LG dishwashers. This display panel is responsible for conveying important information about the wash cycle as well as enabling cycle and option selection. 

Causes of a bad display panel can include dama

The Dishwasher Inlet Valve is an OEM part for LG dishwashers. This valve controls the flow of water into the dishwasher, opening to allow water in at the start of the wash cycle and closing to prevent any further water entry once the desired level is r

A replacement damper assembly that controls airflow between compartments to help the refrigerator maintain proper temperatures. Restores the air pathway so the fresh food and freezer sections cool more consistently. What it does:

• Regulates airfl

Right side

The Rail Assembly is an OEM part for LG dishwashers. It is a part that supports and guides the motion of the dish racks in and out of the dishwasher. The rail assembly is designed with precision fits and smooth surfaces to allow easy

Fix a refrigerator that won't cool, has display errors, or isn't responding to controls. This control board module regulates temperature and functions.

Replacement dishwasher name plate with model information. Installs on exterior door panel. Replace if missing, faded, peeling, or damaged.

The Display PCB Assembly is an OEM replacement part for LG dishwashers. It is the circuit board located within the control panel that operates the digital display interface. The PCB processes signals to illuminate touch buttons and cycle indicators, sh

This front PCB assembly is the electronic control board that manages user inputs and front-panel functions, restoring responsive controls and display operation. Use it to replace a failed or unresponsive front control board and recover normal panel behavi

This factory parts assembly replaces a damaged or failed component assembly to restore proper operation and control. It's a direct-fit replacement made to the original manufacturer's specification for reliable performance. What it does:

• Replaces

The Leg is an OEM part for LG dishwashers. It serves as a critical base component that elevates the dishwasher body above the floor for proper drainage. Legs are constructed with durable corrosion-resistant materials and adjustable height features to a

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.