Kenmore Refrigerator 106.8650513 (1068650513, 106 8650513) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10662129
The Run Capacitor is an OEM part for Whirlpool appliances, designed to provide the necessary electrical charge to start and run the compressor motor. This part attaches to the compressor to aids in maintaining a consistent motor speed and ensuring smooth operation. The run capacitor plays a crucial role in the appliance's electrical system, storing and releasing energy as needed to power the motor.
Causes of a bad Run Capacitor include electrical surges, wear and tear over time, or overheating, which can lead to a failure in providing the necessary start-up energy or maintaining motor speed.
Symptoms of a bad Run Capacitor include:
- The appliance does not start.
- The motor shuts off shortly after starting.
- The appliance is humming but not running.
- Increased energy consumption.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Too warm
-
Clicking sound
-
Won't start
-
Freezer section too warm
See more...
Do-It-Yourself Stories from Customers like You
Both the freezer and refrigerator stopped cooling Raymond O. • Kerrville , TX • April 11, 2015
I have a Kitchen Aid side by side refrigerator/freezer which is 8 years old. One day it just stopped cooling. At first I was just going to junk it and purchase a new one. However, I took off the lower back cover and noticed the compressor was not running. I knew from experience that these compressors need a starter capacitor and relay and it is not uncommon for these parts to fail. I looked on the Internet for a video which showed how to remove the parts. I also found a video which showed how...
Read more
More
$42.95
- Compare At:
-
$50.68
- You Save:
-
$7.73
Genuine Whirlpool part
By: Whirlpool
Part Number: W10822278
The Whirlpool Defrost Timer is an OEM replacement part for Whirlpool refrigerators. The defrost timer regulates the automatic defrost cycle, which prevents ice buildup on the evaporator coils in the freezer compartment by sending a signal to the defrost heater to turn on and melt any ice buildup on the coils.
Causes of a bad defrost timer can include mechanical wear over time, electrical failures, or internal component damage. Prolonged usage and voltage spikes can also affect the timer's functionality.
Symptoms of a bad Defrost Timer include:
- Excessive frost buildup in the freezer compartment
- The refrigerator or freezer not maintaining the set temperatures
- Unusual noises coming from the appliance
- The appliance running continuously without cycling off
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Too warm
-
Fridge runs too long
-
Fridge too cold
-
Frost buildup
See more...
Do-It-Yourself Stories from Customers like You
Defrost not working on upright 20 year old freezer W D D. • Spring , TX • September 19, 2014
A word of thanks to AppliancePartsPros - they delivered in one day. Ordered at 4PM CDT and received the part by noon the next day. Also, Alicia in the help department was able to locate an electrical diagram for my old freezer. This was essential for proper setup and her persistence in tracking down the diagram was top notch. Now on to my problem. One day I opened the freezer and found frost and thawing food. I attributed this to the door hitting an item in the freezer and not completely...
Read more
More
$33.95
- Compare At:
-
$40.06
- You Save:
-
$6.11
Genuine Whirlpool part
By: Whirlpool
Part Number: 833697
This OEM Replacement Part is a high-quality, 2-watt condenser fan motor for Whirlpool refrigerators.The motor is designed to optimize your refrigerator's cooling performance. This 115-volt motor operates with a clockwise rotation.
Symptoms of a bad condenser fan motor kit include:
- Gradual rise in interior freezer temperatures
- Inability to maintain consistent cooling performance
- Loud buzzing or grinding noises coming from inside
- Tripped breakers or failure to restart after service
Causes stem from normal wear of ball bearings as the high-efficiency motor operates continuously. Exposure to dust or debris introduced through openings accelerates wear over many years of use.
This OEM part is also compatible with brands including Kenmore, KitchenAid, and Danby.
This part fixes the following symptoms
-
Fridge runs too long
-
Noisy
-
Freezer section too warm
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
Conderser motor went out David W. • Durand , MI • April 03, 2014
After reviewing the 'how to' video on AppliancePartsPros.com, I unplugged the refrigerator and removed the back cover to access the motor. I then unplugged the wiring and removed the bad motor. I cut the clip plug and wired it to the new motor, installed the fan blade from the old motor and re-installed the new motor. After connecting the clip plug and re-installing the back cover, I plugged the refrigerator in and checked the interior about 5 minutes after the repair. Everything has been...
Read more
More
$61.95
- Compare At:
-
$73.72
- You Save:
-
$11.77
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2149705
The Light Switch is an OEM part for Whirlpool refrigerators. This switch is responsible for controlling the refrigerator's interior light, turning it on when the door is opened and off when it is closed.
Symptoms of a failing refrigerator light switch include:
- The interior light staying on when the refrigerator door is closed
- The light not activating when the refrigerator door is opened
- Intermittent or flickering light due to a loose connection or faulty switch
Causes of light switch failure typically involve mechanical wear from repeated use, accumulation of dirt or debris that can interfere with the switch mechanism, or electrical issues such as short circuits.
This OEM part is also compatible with other brands manufactured by Whirlpool, including Maytag, KitchenAid, Jenn-Air, Amana, and others.
Do-It-Yourself Stories from Customers like You
The refrigerator lights in our whirlpool refrigerator did not go on when the door was opened Dennis G. • Somerville , NJ • August 16, 2014
We had delayed repairing the problem because we received a price of more than $ 100 from a local appliance repairman. However, after viewing the view on the ApplianceParts Pro website, I saw what an easy repair it would be. After receiving the part from you, I had my son do the repair because I felt it would a good father - son bonding time. It was so easy and he was proud of his ability. Thanks for your excellent repair video and the excellent price. It costs less than $ 22 instead of more...
Read more
More
$39.76
- Compare At:
-
$47.31
- You Save:
-
$7.55
Genuine Whirlpool part
By: Whirlpool
Part Number: W11745278
The Bracket-Door Stop is an OEM replacement part for Whirlpool appliances. This zinc-finished bracket is designed to prevent the appliance door from opening beyond its intended range, protecting both the door and surrounding components from potential damage. It ensures the door stays secure and functions smoothly during regular use.
Symptoms of a bad Bracket-Door Stop include:
- The door overextending when opened
- Difficulty in maintaining the door's position
- Visible bending, cracking, or damage to the bracket
Causes of a failing Bracket-Door Stop can include repeated stress from excessive force when opening the door, normal wear over time, or accidental impacts. A damaged bracket can compromise the door's alignment and overall functionality.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Bottom of right door was broken not repairable. Joseph M. • Lombard , IL • August 11, 2023
Replaced the complete door assembly.
Read more
More
$7.34
- Compare At:
-
$8.16
- You Save:
-
$0.82
Genuine Whirlpool part
By: Whirlpool
Part Number: 482731
The Evaporator Fan Motor Kit is an OEM replacement part for Whirlpool refrigerators. It includes the evaporator fan motor, which is responsible for circulating air over the evaporator coils, and any necessary mounting hardware or accessories.
Symptoms of a need to replace the evaporator fan motor kit include:
- Inadequate cooling or uneven temperature distribution within the refrigerator
- Loud noises or excessive vibrations coming from the evaporator area
- Complete failure of the refrigerator to cool or maintain temperature
Causes of a faulty evaporator fan motor can include general wear and tear, electrical malfunctions, bearing failures, or physical damage from impact or foreign objects.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models.
This part fixes the following symptoms
-
Noisy
-
Freezer section too warm
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
Noisy evaporator fan motor Ken L. • Maryland Heights , MO • August 10, 2014
Replaced motor/fan assembly
Read more
More
$65.95
- Compare At:
-
$77.82
- You Save:
-
$11.87
Genuine Whirlpool part
By: Whirlpool
Part Number: 350930
Color: White. Size: 13 oz can. Acrylic appliance aerosol can spray paint.
The Appliance Spray Paint is an OEM part for Whirlpool appliances, designed to provide a quick and effective way to touch up or completely refinish the exterior of various appliances. This specialty spray paint is formulated to adhere to metal surfaces, offering a durable and resistant finish that can withstand the routine wear and tear of kitchen environments, including heat, moisture, and everyday use.
The primary reason for using such a specialized paint is to maintain or restore the aesthetic appeal of your appliances while protecting them from further damage.
Symptoms needing for Appliance Spray Paint include:
- Scratches, chips, or rust spots on the appliance's exterior that can lead to further damage or corrosion if left untreated
- A desire to refresh or update the appearance of the appliance without the need for complete replacement
- Discoloration or fading of the original finish due to age, exposure to sunlight, or cleaning agents
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015
Replaced It With New One
Read more
More
$24.95
- Compare At:
-
$29.94
- You Save:
-
$4.99
Genuine Whirlpool part
By: Whirlpool
Part Number: 72017
The Appliance Touchup Paint is an OEM product for Whirlpool appliances. This touchup paint is used to cover scratches, chips, and minor blemishes on the surface of various appliances, helping to maintain their appearance and protect them from rust and other damage. It is specifically formulated to match the original color and finish of Whirlpool appliances, ensuring a seamless repair.
Causes of needing touchup paint include everyday wear and tear, accidental impacts that cause chipping or scratching, and exposure to harsh cleaning chemicals that can damage the finish. Regular use of touchup paint can help keep appliances looking new and extend their lifespan.
Symptoms indicating the need for Appliance Touchup Paint include:
- Visible scratches or chips on the appliance surface
- Areas of exposed metal prone to rust
- Blemishes that affect the overall aesthetic of the appliance
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Chipped paint Thomas S. • Middletown , DE • September 03, 2014
Touch up paint
Read more
More
$12.55
- Compare At:
-
$15.06
- You Save:
-
$2.51
Genuine Whirlpool part
By: Whirlpool
Part Number: 4318297
The Door Shelf End Cap Kit is an OEM part for Whirlpool refrigerators. This kit includes the end caps that attach to the refrigerator door, securing the shelves in place and providing support for storing various items. These end caps are crucial for maintaining the stability and functionality of the door shelves.
Causes of bad end caps can include regular wear and tear, impact from heavy items, or repeated removal and replacement of the shelves.
Symptoms of bad door shelf end caps include:
- Shelves sagging or not staying in place
- Cracks or visible damage to the end caps
- Difficulty in securing the shelves to the door
- Shelves falling out when the door is opened
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken end pieces for an old fridge Frank C. • Framingham , MA • November 17, 2017
Fixed with new exact replacement parts.
Read more
More
$21.95
- Compare At:
-
$26.12
- You Save:
-
$4.17
Genuine Whirlpool part
By: Whirlpool
Part Number: 4386917
The Door Shelf Bar End Cap Kit is an OEM part for Whirlpool refrigerators. The kit consists of two end caps that secure the door shelf bar in place, ensuring that the shelf stays stable and can support items stored on it.
Causes of a bad end cap can include wear and tear over time, physical damage due to impact, or plastic degradation from repeated use and exposure to varying temperatures. These factors can lead to the end caps becoming loose or broken, compromising the integrity of the door shelf bar.
Symptoms of a bad end cap include:
- Door shelf bar not staying in place
- Items falling off the shelf
- Visible cracks or damage to the end caps
- Difficulty in securing the door shelf bar properly
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken shelf bar end cap on whirlpool refrigerator David K. • El Dorado Hills , CA • October 31, 2014
I can't believe that we lived with this shelf bar continually falling off for years due to a broken end cap. Easily found the replacement end cap on AppliancePartsPros for our 18 year old refrigerator. The "repair", if you can call it that, took perhaps 30 seconds -- remove old broken end cap, insert new one. Done. No more shelf bar falling off. One of life's little annoyances just went away.
Read more
More
$18.95
- Compare At:
-
$22.74
- You Save:
-
$3.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP488729
This screw is used to secure the handle end cap to the center of the door. The screw size measures 8-18 x 1/2 inches.
Do-It-Yourself Stories from Customers like You
The lint catch was broken Misti P. • Spokane , WA • January 18, 2019
This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one.
Read more
More
$8.36
- Compare At:
-
$9.95
- You Save:
-
$1.59
Genuine Whirlpool part
By: Whirlpool
Part Number: 4387478
The Light Socket Kit is an OEM part for Whirlpool refrigerators. This kit includes the light socket and necessary components to ensure proper installation and functionality. It is designed to hold the refrigerator light bulb securely and provide reliable electrical connections to illuminate the interior of the refrigerator.
Common causes of failure include wear and tear, corrosion from moisture, or damage from handling or bulb replacement.
Symptoms of a bad Light Socket Kit include:
- Refrigerator light not turning on
- Flickering or intermittent lighting
- Visible damage or corrosion on the socket
- Burned or melted areas around the socket
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The refrigerator light didn't work Maria V. • Sonoma , CA • November 21, 2014
I saw your video on you tube and it seems very easy to do it my self, so I ordered the parts and I did it my self. It was very easy. Thank you for sharing with us on how to did it. One more thing, the parts arrived on the time they said it would come.
Read more
More
$48.95
- Compare At:
-
$58.25
- You Save:
-
$9.30
Genuine Whirlpool part
By: Whirlpool
Part Number: 2188450A
This is the perimeter seal for the refrigerator's fresh food compartment door. It restores an airtight seal to keep cold air in and humid room air out, helping maintain temperature, reduce condensation, and improve overall efficiency.
- Seals the fresh food door opening to prevent air leaks
- Helps stabilize internal temperature and reduce run time
- Replace if torn, cracked, deformed, or not sealing evenly
- Symptoms can include condensation or moisture around the door, warm spots, frost near the door edge, or the door not closing fully
What's included: One refrigerator door gasket. Install notes:
- Disconnect power; allow the door area and new gasket to warm to room temperature
- Soften the new gasket in warm water to relax bends before installation
- Remove the old gasket; seat the new one fully into the channel, starting at the corners—do not stretch
- Use gentle, low heat (hair dryer) to smooth waves; perform a "paper test" around the perimeter and adjust hinges if needed
Do-It-Yourself Stories from Customers like You
Door seals were cracked and leaking causing temperature control issues and wasting electricity Mike W. • Canoga Park , CA • December 14, 2015
Ordered new door seals (gaskets) from Appliance Parts Pros. I was able to replace the freezer door seal without taking the door off the refrigerator. (Note: this is an over/under type refrigerator, with the freezer section on top) However, the first attempt at replacing the refrigerator door seal without removing the door from the fridge did not go well as the door appeared "warped" after I reassembled it and would not come close to sealing when I closed it. When I took the door off the fridge...
Read more
More
$122.72
- Compare At:
-
$144.81
- You Save:
-
$22.09
Genuine Whirlpool part
By: Whirlpool
Part Number: WP681414
Specs: 10-16 x 1/2 inch.
Do-It-Yourself Stories from Customers like You
Dryer drum was beginning to stall occasionally Dana J E. • San Marcos , CA • March 17, 2015
After shopping for a new Whirlpool Thin Twin Stack, Found appliance parts pros online and decided to take it apart to see if repair was a possibility. APPro's online instructions were easy to follow, in a couple hours it was apart, and I placed the order. Reg ground took a week from NY, so the laundry piled up that week. The parts arrived on Monday morrning, by afternoon the machine was running like new! The cause was the belt tensioner pulley had frozen. Replaced it, drum wheels,snap...
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489478
Size: 8 x 1/2 ab.
Do-It-Yourself Stories from Customers like You
Wanted to update wood paneled compactor Julie S. • San Antonio , TX • December 09, 2014
Removed the handle with two screws on the inside front and pulled out the custom wood panel. Pulled the compactor out from under cabinet. Tipped it over on back of unit, supporting it with a little foot stool. Unscrewed two lower screws at bottom of unit holding black trim panel (that held wood panel in place) and lower black rubber flap. Removed two screws on lower outside side of unit that held the foot pedal. Slid off black U shaped metal frame from top of compactor towards bottom. Slid on...
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2172748
This crisper cover support mounts to the refrigerator liner and holds the crisper cover frame/glass level. Replacing a broken or missing support restores a stable shelf surface and helps the crisper drawers slide and close properly.
- Supports the crisper cover frame/glass along the cabinet wall
- Maintains a level surface to help prevent sagging or glass shifting
- Keeps crisper drawers aligned and moving smoothly
- Common symptoms: cracked or missing support, shelf tilts, glass slips, drawers scrape or won't close fully
What's included: 1 crisper cover support Install notes:
- Disconnect power and clear the shelf area
- Remove crisper drawers and lift out the cover/glass
- Release and remove the damaged support; snap or screw the new support into the same position
- Reinstall the cover and drawers; verify level fit
Do-It-Yourself Stories from Customers like You
The bar that supports the lower glass shelf and drawers was missing Derek C. • Nashville , TN • January 11, 2015
I had to cut down the length of the bar using a Dremel so that it would fit into the channels, it was originally too wide to fit into the fridge. One thing to note, only cut it as wide as the actual fridge; you can get it into the plastic shelf structure by sliding it too much into one side, and then guiding it into the other side.
Read more
More
$64.61
- Compare At:
-
$76.24
- You Save:
-
$11.63