Kenmore Refrigerator 596.72232200 (59672232200, 596 72232200) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: D7824706Q
The Replacement Icemaker is an OEM replacement part for Whirlpool made refrigerators including Whirlpool, Amana, Maytag, and many others. It is a component responsible for producing ice cubes or crushed ice, ensuring a constant supply of fresh ice for your convenience. Measuring approximately 11 inches long and 5 inches wide, this ice maker assembly is made of durable plastic and metal
Symptoms of needing a replacement icemaker include:
- No ice production or significantly reduced ice output
- Ice cubes appearing misshapen or clumped together
- Leaks or water buildup in the icemaker area
- Strange noises or grinding sounds coming from the icemaker
Causes of a faulty icemaker can include normal wear and tear over time, water supply issues, clogging or blockages, or electrical malfunctions.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models.
Please note: that this ice maker is a replacement only and not suitable for add-ons or brand-new installations. It does not include the harness or hardware. For wire harness(Plug)order WPD7813010. For cover order WPW10289690. For shut off bail arm order WP67004028.
This part fixes the following symptoms
-
Ice maker dispenses too little ice
-
Ice maker not making ice
-
Ice maker won't dispense ice
-
Leaking
See more...
Do-It-Yourself Stories from Customers like You
Ice maker stopped producing ice William W. • Southampton , NJ • July 31, 2015
My first hour: I investigated first by pulling out refridgerator to see if the water line hose was kinked. I started under the kitchen sink where it begins, coming from faucet water supply. Then I followed it to the back of the fridge to see if anything looked odd. Next I went to the ice maker itself. I investigated the ice maker by removing the freezer food sliding tray and hanging tray, and then unscrewing the door off the slides. When I looked inside at the ice maker, I saw the tube where...
Read more
More
$95.95
- Compare At:
-
$119.43
- You Save:
-
$23.48
Genuine Whirlpool part
By: Whirlpool
Part Number: 8009
Original Whirlpool light bulb, 40 watt.
Symptoms of needing to replace the light bulb include:
- Dimming or flickering light
- Complete lack of illumination inside the appliance
- Visible signs of damage or burnout on the bulb itself
Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Kenmore, Frigidaire, GE, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.
Do-It-Yourself Stories from Customers like You
Jennair jjw9630cas double oven doors did not close all the way and the light would not go out Wayne W. • East Longmeadow , MA • February 13, 2016
I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it...
Read more
More
$17.76
- Compare At:
-
$20.96
- You Save:
-
$3.20
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10671238
The Center Crisper Rail is an OEM part for Whirlpool refrigerators. It serves as a support for the crisper drawer, helping to guide and stabilize the drawer as it slides in and out.
Symptoms of a bad Center Crisper Rail include:
- Difficulty in sliding the crisper drawer in or out.
- The drawer sagging or not aligning properly when closed.
- Unusual noises or resistance when moving the drawer.
Causes of a bad center crisper rail can include physical damage from overloading the drawer, wear and tear from regular use, or breakage due to brittle plastic and aging components.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
A plastic end piece of the center crisper rail holding the 2 lower drawers broke leaving no center track to slide the drawers into Gertrude M. • Rock Port , MO • September 19, 2014
I ordered a replacement part...took the shelf out of the refrigerator and slid the new rail into place.
It was quick, required no tools and it works perfectly!
Read more
More
$52.32
- Compare At:
-
$62.78
- You Save:
-
$10.46
Genuine Whirlpool part
By: Whirlpool
Part Number: W10613606
The Compressor Start Relay is an OEM part for Whirlpool refrigerators. This component helps to kickstart the compressor, facilitating the refrigeration cycle that cools the interior of the fridge.
Such issues can stem from electrical failures within the relay, physical damage, or wear and tear from regular use. When the relay does not function correctly, it can lead to inconsistent cooling and, in severe cases, cause the compressor to overheat and fail prematurely.
Symptoms of a failing Compressor Start Relay include:
- The refrigerator not cooling properly or not cooling at all
- A noticeable clicking sound emanating from the back of the refrigerator, indicating the relay is trying to start the compressor but failing
- The refrigerator starts and stops frequently, unable to maintain a constant temperature
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Clicking sound
-
Won't start
-
Freezer section too warm
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
Fan would run but compressor would not start-resulting in no cooling. Thomas F. • De Soto , WI • March 14, 2014
Removed back cover and installed new start device. Plugged in refridgerator and it runs like new.
Read more
More
$53.27
- Compare At:
-
$74.44
- You Save:
-
$21.17
Genuine Whirlpool part
By: Whirlpool
Part Number: W11396033
The Door Switch is an OEM part for Whirlpool refrigerators. This switch is crucial for controlling the interior lights and the activation of certain refrigerator functions when the door is opened or closed.
Symptoms of a failing Door Switch include:
- Interior lights staying on when the refrigerator door is closed
- Interior lights not turning on when the door is opened
- The refrigerator unexpectedly starting or stopping
- Alarms or indicators malfunctioning, signaling an open door when it is closed
Causes of a bad door switch can involve mechanical failure due to wear and tear from frequent use, damage from impacts (such as slamming the door), or electrical issues like a short circuit or faulty wiring.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Light switch on bottom freezer compartment flakey (intermittant) Alfred M. • Pahoa , HI • September 07, 2014
I watched the video on replacing the switch on a side freezer where prying out to original switch did not look difficult. I then got on the floor and tried to pry out my switch. Had a terrible time (locking tab or switch body hardened with time?) and mangled the switch terribly and the upper panel of the freezer somewhat, but the switch did come out. AND THEN the top freezer panel with the switch and light assembly fell out into my hands! I was able to unplug one Molex connector and the...
Read more
More
$29.30
- Compare At:
-
$34.87
- You Save:
-
$5.57
Genuine Whirlpool part
By: Whirlpool
Part Number: 833697
This OEM Replacement Part is a high-quality, 2-watt condenser fan motor for Whirlpool refrigerators.The motor is designed to optimize your refrigerator's cooling performance. This 115-volt motor operates with a clockwise rotation.
Symptoms of a bad condenser fan motor kit include:
- Gradual rise in interior freezer temperatures
- Inability to maintain consistent cooling performance
- Loud buzzing or grinding noises coming from inside
- Tripped breakers or failure to restart after service
Causes stem from normal wear of ball bearings as the high-efficiency motor operates continuously. Exposure to dust or debris introduced through openings accelerates wear over many years of use.
This OEM part is also compatible with brands including Kenmore, KitchenAid, and Danby.
This part fixes the following symptoms
-
Fridge runs too long
-
Noisy
-
Freezer section too warm
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
Conderser motor went out David W. • Durand , MI • April 03, 2014
After reviewing the 'how to' video on AppliancePartsPros.com, I unplugged the refrigerator and removed the back cover to access the motor. I then unplugged the wiring and removed the bad motor. I cut the clip plug and wired it to the new motor, installed the fan blade from the old motor and re-installed the new motor. After connecting the clip plug and re-installing the back cover, I plugged the refrigerator in and checked the interior about 5 minutes after the repair. Everything has been...
Read more
More
$61.95
- Compare At:
-
$73.72
- You Save:
-
$11.77
Genuine Whirlpool part
By: Whirlpool
Part Number: W11384469
The Door Switch is an OEM part for Whirlpool refrigerators. This switch plays a crucial role in monitoring the status of the refrigerator door. It detects when the door is open and closed and signals the refrigerator to suspend or resume cooling operations accordingly.
Causes of a bad door switch can include general wear and tear over time, exposure to moisture, or impact damage. Please check for proper connection and that the wires are intact before replacing the switch.
Symptoms of a bad door switch include:
- The refrigerator fails to resume cooling after closing the door
- The inside light fails to turn on when the door is opened
- Abnormal energy usage due to improper door monitoring
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Fridge interior light kept going out Phil D. • Phoenix , AZ • June 16, 2014
Replaced door switch - it took less than 5 minutes - works perfectly
Read more
More
$29.30
- Compare At:
-
$35.16
- You Save:
-
$5.86
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2169142
The Evaporator Fan Motor Blade is an OEM part for Whirlpool refrigerators. It is a crucial component of the refrigerator's cooling system, attached to the evaporator fan motor to circulate air over the evaporator coils. This circulation helps distribute cold air throughout the refrigerator and freezer compartments, ensuring consistent temperatures and efficient operation.
Symptoms of a bad Evaporator Fan Motor Blade include:
- Unusual noise coming from the fan area, indicating the blade may be hitting another component or is unbalanced,
- Insufficient cooling in the refrigerator or freezer compartments,
- The refrigerator running longer than usual to maintain the desired temperature.
Causes of evaporator fan motor blade failure typically include physical damage from interference with other components, wear from continuous use, or buildup of ice or debris that unbalances the blade.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Loud noise coming from freezer. Periodic grinding like an old fan/motor. Jimmy F. • Evanston , IL • July 26, 2022
The fridge is 20+ years old in a home we recently moved into.
It sounded like a motor getting stuck on something or grinding weird... was hoping it wasn't something more serious. Found this site, clicked 'noisy' and got the replacement evaporator fan motor blade as well as the motor evaporator.
Turned out I didn't really need to replace the fan blade, but since I had it and ours was old, figured I might as well put in the new parts.
Followed the videos here, which were really helpful. The...
Read more
More
$26.95
- Compare At:
-
$32.84
- You Save:
-
$5.89
Genuine Whirlpool part
By: Whirlpool
Part Number: W10443315
The Gasket-FIP is an OEM part for Whirlpool refrigerators, ensures an airtight seal around the door, preventing cold air from escaping and warm air from entering. This component contributes to the refrigerator's energy efficiency and cooling effectiveness, maintaining the optimal internal temperature to keep your food fresh longer.
Causes of a bad Gasket-FIP can range from normal wear and tear, accidental damage, or deformation due to improper cleaning methods or exposure to extreme temperatures.
Symptoms of a bad Gasket-FIP include:
- Noticeable gaps between the gasket and the refrigerator door or frame
- Condensation or frost buildup near the door edges
- The refrigerator working harder to maintain its internal temperature, potentially leading to increased energy bills
- The door not closing as smoothly or firmly as it should
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Freezer needed new gasket George M. • Saint James , NY • July 12, 2016
Left new gasket on the table overnight so it could stretch out. Removed the door. Temporarily replaced it with plastic and tape. Pulled off old gasket. Cleaned surfaces with decreaser and wiped dry with paper towels and alcohol. Inserted new gasket. Replaced door.
Read more
More
$121.95
- Compare At:
-
$145.12
- You Save:
-
$23.17
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10568041
The Crisper Shelf Frame is an OEM part for Whirlpool side-by-side refrigerators. It provides sturdy tracked support for organizing vegetables and other produce items in the crisper drawers. The glass and center support are NOT included and must be ordered separately.
Causes of a bad crisper shelf frame can include heavy loads causing cracks or breaks, exposure to moisture leading to warping, or accidental impacts during loading and unloading of groceries.
Symptoms of a bad crisper shelf frame include:
- Cracks or breaks in the frame
- Difficulty sliding crisper drawers in and out
- Items stored on the shelf are unstable or fall through
- The frame not fitting securely in its designated space
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
This part doesn't have any support across the back in the center and it finally broke too bad to use Keith O. • Springfield , MO • January 11, 2019
So this is a poor design in the first case. Not having a center support in the back almost guarantees a failure there eventually. I kludged together a support in my original more than a year ago, but finally the part broke too bad to limp along with anymore.
This is the part I needed. That being said, be very attentive about the fact that it's not the entire shelf assembly.
There is a metal support across the front of the frame that is not included. The trim above the drawers, and the...
Read more
More
$87.75
- Compare At:
-
$105.30
- You Save:
-
$17.55
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10128551
The Evaporator Fan Motor is an OEM part for Whirlpool refrigerators. It is responsible for circulating air over the evaporator coils, which helps to maintain a consistent temperature throughout the refrigerator and freezer compartments. It operates at a power requirement of 115V, 60Hz, and 0.14A, featuring a shaft that measures 1/8" in diameter and 5/8" in length.
Causes of a bad evaporator fan motor can include electrical failures, wear and tear from continuous use, or obstruction from debris that hinders the fan's movement. A malfunctioning fan motor can lead to uneven cooling and compromised performance of the refrigerator.
Symptoms of a bad evaporator fan motor include:
- Inconsistent temperatures in the refrigerator or freezer
- Unusual noises coming from the fan area
- The refrigerator running continuously without cycling off
- Frost buildup on the evaporator coils
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Evaporator fan stopped working Robert M. • Metairie , LA • December 25, 2016
The fan has a very thin wire in it's coil, and when that wire breaks, you need a new fan. In a previous repair, i noticed that an ice build-up had dislodged the wiring on my fan and severed the coil winding. I was able to undo the winding a couple of turns and get it working again.
But more recently, the fan stopped and there was no repairing it. So i ordered a new fan from AppliancePartsPros.com and it got here in very good time. The new fan was slightly different as the prongs seemed to be...
Read more
More
$54.26
- Compare At:
-
$72.13
- You Save:
-
$17.87
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67001053
The Drawer Glide is an OEM part for Whirlpool refrigerators. This component facilitates the smooth sliding motion of refrigerator drawers, ensuring easy access to stored items.
Over time, drawer glides can become worn out or damaged due to constant use, heavy loads, or accidental impacts. A faulty drawer glide can hinder the smooth operation of the refrigerator drawers, making them difficult to open or close.
Symptoms of a bad Drawer Glide include:
- Difficulty in sliding the drawer in and out
- The drawer getting stuck or not aligning properly
- Unusual noises when operating the drawer
- The drawer not staying in place or sagging
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Note: Right hand side. For left side use WP67001054
Do-It-Yourself Stories from Customers like You
Deli bin side glides were cracked Gregory K. • Pickerington , OH • May 30, 2015
Ordered and installed new ones.
Read more
More
$10.43
- Compare At:
-
$12.41
- You Save:
-
$1.98
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67001054
The Drawer Glide is an OEM part for Whirlpool refrigerators. It ensures the smooth operation of refrigerator drawers, allowing them to slide in and out effortlessly. The glide measures approximately 15 inches in length.
Causes of a bad drawer glide can include wear and tear from regular use, accumulation of debris or dirt, or physical damage due to impact or overloading the drawers. When the glide becomes damaged, it can hinder the functionality of the refrigerator drawers, making it difficult to access stored items.
Symptoms of a bad drawer glide include:
- Difficulty opening or closing refrigerator drawers
- Drawers getting stuck or not sliding smoothly
- Unusual noises when operating the drawers
- Drawers misaligning or falling off their tracks
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Note: For the right side drawer glide, use part number WP67001053
Do-It-Yourself Stories from Customers like You
Deli bin side glides were cracked Gregory K. • Pickerington , OH • May 30, 2015
Ordered and installed new ones.
Read more
More
$10.43
- Compare At:
-
$12.31
- You Save:
-
$1.88
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67002633
The Pan, Crisper is an OEM part for Whirlpool refrigerators. It is designed to store fruits and vegetables, providing an optimal environment to keep produce fresh for a longer period. The crisper pan helps maintain the right humidity levels, ensuring your produce stays crisp and tasty. Its dimensions approximately measure 6.9" High x 14.05" Wide x 14.9" Long.
You should replace this crisper pan if it becomes damaged or broken. Causes of a bad crisper pan can include regular wear and tear, exposure to heavy items, or accidental drops. A damaged pan can lead to decreased storage efficiency and potential spoilage of produce.
Symptoms of a bad Pan, Crisper include:
- Cracks or breaks in the pan
- Difficulty in sliding the pan in and out of its compartment
- Reduced ability to maintain humidity levels
- Produce not staying fresh as long as expected
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken veggie drawer in frig Larry G. • Newport , RI • September 06, 2015
Ordered part, the correct part came the next day.
Read more
More
$100.26
- Compare At:
-
$118.31
- You Save:
-
$18.05
Genuine Whirlpool part
By: Whirlpool
Part Number: 12001937
The Defrost Thermostat Kit is an OEM part for Whirlpool refrigerators. It regulates the temperature in the freezer during the defrost cycle, ensuring that the defrost heater activates to melt any frost buildup and then turns off to maintain the proper freezer temperature. This thermostat opens at 42°F and closes at 30°F. This mechanism allows for short, controlled heating periods to melt frost without affecting the contents of the appliance.
You should replace this defrost thermostat kit if it becomes defective. Common causes of a bad defrost thermostat include electrical failures, prolonged exposure to extreme temperatures, or wear and tear over time.
Symptoms of a bad defrost thermostat include:
- Frost buildup in the freezer
- The refrigerator running continuously without cycling off
- The freezer not maintaining the correct temperature
- Water leaks from the freezer during the defrost cycle
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Freezer not defrosting
-
Freezer too cold
-
Fridge too warm
-
Freezer section too warm
See more...
Do-It-Yourself Stories from Customers like You
Freezer was cold but refrigerator was warm Beth M. • Marengo , IL • August 06, 2018
After we moved into our new home, we realized that the freezer was very cold and the fins were frosting over, and the refrigerator wasn't cold. We had to take it apart and manually defrost it about once every 8 to 10 days. After research online, we found Appliance Parts Pros videos, which clearly explained how to fix it ourselves, a savings of at least $1,000 or more, since a new one of this size would have been in the arena of $1,200 to $2000. We ordered the three most likely parts to be bad,...
Read more
More
$64.61
- Compare At:
-
$76.89
- You Save:
-
$12.28
Genuine Whirlpool part
By: Whirlpool
Part Number: WP681249
The Screw is an OEM part for Whirlpool refrigerators, designed to secure components of the ice maker assembly. This screw maintains the structural integrity of the ice maker, ensuring that all parts are tightly fastened to prevent malfunction or inefficiency in ice production.
Causes of failure can include stripping of the screw threads through over-tightening or corrosion, leading to a less secure fit.
Symptoms of a bad Screw include:
- Loose or dislodged components within the ice maker assembly.
- Inconsistent or halted ice production due to components shifting.
- Unusual noises emanating from the ice maker as a result of loose parts.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The handle on the refrigerator door was broken and needed to be replaced Richard W. • Baltimore , MD • April 12, 2015
Took off the freezer door, took off the top hinge on the refrigerator door, replaced the handle, re-installed the top hinge and the freezer door. This is a two person job - one to remove the top hinge and replace the handle, while a second person holds the refrigerator door in place. Replacing the handle was easy. The most irritating part was figuring out what parts to order. The drawing of the refrigerator door (Drawing # 4) used to figure out what parts to order was not clear. I paid $8...
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13