Kenmore Dishwasher 665.14213K900 (66514213K900, 665 14213K900) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10282479
Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.
More
$20.95
- Compare At:
-
$24.72
- You Save:
-
$3.77
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8565925
Replaces cracked, broken, or missing dishwasher rack stop clips. Secures upper or lower dishrack to track rail, preventing rack from sliding out too far.
Do-It-Yourself Stories from Customers like You
Dishwasher would not discharge water John S. • Lebanon , NJ • August 15, 2015
My discharge would not empty after a wash cycle and I always had gross gray water left in the bottom approx 3" deep?
After doing the obvious things of checking the simp for garbage, and checking that the discharge hose wasn't blocked, I removed my discharge pump ( not too hard to do) and tested. My pump which did run and turn the impeller. However, the pump evidently had weakened with time and weakened and could no longer pump the waste water up hill to the "T" connection under the sink.
A...
Read more
More
$9.41
- Compare At:
-
$11.10
- You Save:
-
$1.69
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10509257
The Door Gasket is an OEM part for Whirlpool dishwashers. This gasket is designed to create a watertight seal around the dishwasher door, preventing water from leaking out during wash cycles. It ensures that the dishwasher operates efficiently by keeping water inside the unit, maintaining optimal cleaning performance, and protecting your kitchen from water damage.
Causes of a bad door gasket can include regular wear and tear from frequent use, exposure to high temperatures and harsh detergents, or damage from debris and foreign objects. Over time, these factors can lead to the gasket becoming brittle, cracked, or deformed, compromising its sealing ability.
Symptoms of a bad door gasket include:
- Water leaking from the dishwasher door during or after a cycle
- Visible cracks, tears, or deformities in the gasket
- The dishwasher door not closing properly or requiring extra force to close
- Mold or mildew buildup on the gasket
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Dishwasher was leaking from the bottom front Alicia M. • Morganton , NC • January 12, 2015
I thought it was the gasket so I ordered a new one. While waiting for it to arrive I read some other forums where I read that sometimes the air vent on the front could be dirty and cause leaking. I popped out that vent cover and it was clogged. Using an old toothbrush and a tiny paint brush I cleaned all of the gunk out. No more leak even with the old gasket in place. I'll save the new gasket for when I need it in the future.
Read more
More
$55.95
- Compare At:
-
$67.14
- You Save:
-
$11.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP717273
The Rubber Washer is an OEM part for Whirlpool dishwashers. This washer plays a role in ensuring a leak-proof seal at various connection points within the dishwasher, such as at the water inlet valve or hose connections. Its primary function is to prevent water from leaking out of the dishwasher during operation, thereby ensuring efficient and safe use of the appliance.
Over time, rubber washers can deteriorate due to the constant exposure to water and chemicals found in dishwasher detergents.
Symptoms of a bad Rubber Washer in a dishwasher include:
- Visible signs of wear or damage to the washer, such as cracks, brittleness, or deformation.
- Water leaking from the dishwasher, particularly around areas where hoses and valves connect.
- A decrease in dishwasher performance due to water not being contained properly during cycles.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
This part fixes the following symptoms
-
Not drying dishes properly
See more...
Do-It-Yourself Stories from Customers like You
Dishwasher not heating. Ben M. • Sacramento , CA • February 18, 2020
Replaced heater element: Once I had the dishwasher out of the cabinet with supply hose, drain hose and electric disconnected, removing the heater element was fast and easy. However, it was confusing that the new heater element had rubber washers on it already, something not mentioned in the product listing, although kinda visible in the photo. I ordered the separate rubber washer parts recommended by Appliance Parts Pros together with the heater element. The separate rubber washers were the...
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: W11752368
This dishrack replaces a damaged, rusted, or warped rack to restore smooth loading and secure support for dishes. A solid rack keeps items upright for better spray coverage, cleaner results, and helps prevent rust transfer and chipping.
- Holds and organizes plates, bowls, and cookware for proper spacing and spray access
- Provides stable support to reduce tipping and breakage during wash cycles
- Replaces racks with rust, broken wires, or bent/missing tines
- Can help resolve issues like rust marks on dishes and loading difficulties
What's included: 1 dishrack Install notes:
- Disconnect power at the breaker before servicing
- Open the door; slide the old rack out—on some models, release rack stops to remove
- Transfer any reusable accessories from the old rack to the new rack if applicable
- Wear cut-resistant gloves; set the new rack on the rails and verify smooth movement and proper door closure
Do-It-Yourself Stories from Customers like You
Rusted Armando G. • Gilbert , AZ • April 26, 2025
Good
Read more
More
$155.79
- Compare At:
-
$173.10
- You Save:
-
$17.31
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3368921
Torx screw secures burner assemblies, igniters, and internal components in gas cooktops and ranges. Replace rusted, stripped, or broken screws.
Do-It-Yourself Stories from Customers like You
Two of the ignition electrode was not working and the torx screws holding the burner assembly were rusted so badly they are broken during dissassembly Huseyin K. • Auburn , AL • October 27, 2014
I have tried to remove the burner assemblies by removing the torx screws but they were badly rusted, and unfortunately they all were broken during removal. I just discarded the ruined orifices and assembled the new orifices and burner assembly.
Read more
More
$6.95
- Compare At:
-
$8.20
- You Save:
-
$1.25
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10204131
Replace cracked or broken dishwasher rack roller axle assemblies. Installs on upper or lower dish racks to restore smooth gliding. Includes clips.
Do-It-Yourself Stories from Customers like You
Broken rollers. Roger H. • Brownstown , IN • July 11, 2017
Snaped off and snaped on.
Read more
More
$9.41
- Compare At:
-
$11.20
- You Save:
-
$1.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8066018
The Detergent Lid Spring is an OEM part for Whirlpool dishwashers. It is responsible for providing the necessary tension to open and close the detergent dispenser lid during the wash cycle.
Over time, the detergent lid spring can wear out, lose tension, or break due to repeated use, exposure to water and detergent, or accidental mishandling. If the spring becomes faulty, the dispenser lid may not function properly, leading to poor washing results.
Symptoms of a bad detergent lid spring include:
- Detergent dispenser lid not opening during the cycle
- Difficulty in closing the dispenser lid
- Inconsistent or incomplete release of detergent
- Visible damage or wear on the spring
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
For the complete detergent dispenser kit order 4387043.
Do-It-Yourself Stories from Customers like You
Latch would not open consistently on detergent dispenser James G. • Waxhaw , NC • January 12, 2015
Appeared to be two problems: the latch was worn and one of the pins that slid in a guide on the actuator located in the inner panel had broke off. Detergent lid spring and pin appeared to be OK but decided to replace since I was aready working on it. I ordered all the inner panel mechanism from the control arm to the latch actuator on the inner panel. The repair was successful as the detergent dispenser now opens during its cycle.
Read more
More
$7.31
- Compare At:
-
$8.70
- You Save:
-
$1.39
Genuine Whirlpool part
By: Whirlpool
Part Number: W10161215
The Dishrack is an OEM replacement part for Whirlpool dishwashers. It measures 21" wide x 21" deep. It provides a stable framework for organizing and holding dishes, glasses, utensils, and other items during the washing cycle. Designed to fit securely in the dishwasher, it ensures proper water flow and cleaning efficiency for all loaded items.
Causes of a bad Dishrack can include prolonged exposure to high temperatures and moisture, leading to rust or corrosion, damage to the coating from sharp utensils, or bending or breaking due to heavy or improperly loaded items. Over time, these issues can compromise its functionality.
Symptoms of a bad Dishrack include:
- Rust or peeling coating on the rack
- Broken or bent tines that can’t hold dishes properly
- Difficulty sliding the rack in and out of the dishwasher
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Coating was coming off allowing rust to form and leave marks on dishes Waldo G. • Wichita , KS • December 30, 2014
Replaced the lower rack
Read more
More
$306.95
- Compare At:
-
$365.27
- You Save:
-
$58.32
Genuine Whirlpool part
By: Whirlpool
Part Number: W10844024
Dishwasher won't fill or overfills with water? The water inlet valve controls fill cycles. Most DIYers complete this repair in under 60 minutes.
Do-It-Yourself Stories from Customers like You
14 year old kitchenaid dishwasher wasn't filling with water (only partially) had to add water during cycles William S. • Annapolis , MD • March 27, 2017
Ordered new inlet water valve and float switch kit. After repairs it now works fine. However the water inlet valve outlet end for fill hose (not water source) and wire connections (supposedly for this unit) were oriented 180 degrees opposite. I had to gently remove the blue plastic valve off the metal support bracket and turn it around and press back in place. Fortunately it appears it was designed for either orientation. Also the solenoid had to be unclipped and also rotated. Again it was...
Read more
More
$50.43
- Compare At:
-
$60.34
- You Save:
-
$9.91
Genuine Whirlpool part
By: Whirlpool
Part Number: 72017
Touch-up paint for covering scratches, chips, and minor blemishes on appliance exteriors. Restores appearance and protects surfaces when finish is damaged.
Do-It-Yourself Stories from Customers like You
Chipped paint Thomas S. • Middletown , DE • September 03, 2014
Touch up paint
Read more
More
$11.51
- Compare At:
-
$13.70
- You Save:
-
$2.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP596669
The Hose Clamp is an OEM part for Whirlpool appliances. It secures hoses in place, ensuring a tight connection and preventing leaks in various systems such as washing machines, dishwashers, and refrigerators. This clamp is crucial for maintaining the integrity of the water or air lines it secures.
Causes of a bad hose clamp include wear and tear over time, exposure to water and detergents, or mechanical stress from repeated tightening and loosening.
Symptoms of a bad hose clamp include:
- Leaks at the hose connection points
- Hoses slipping off the connections
- Visible rust or damage on the clamp
- Reduced appliance efficiency due to leaks
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Will not stop filling with water
-
Leaking
See more...
Do-It-Yourself Stories from Customers like You
My washing machine smelt horrible Bryan W. • Ogdensburg , NY • August 20, 2018
First off I have to say that Appliance Parts Pro's saved me from hiring a repair person, and quite possibly just getting rid of my washing machine. Their video's helped out SOOOOOOOO much and the advice one of their agents gave me over their online chat helped me trouble shoot something when I got stuck. On top of this they shipped my parts fast enough that less than 12 hrs later they arrived, which allowed me to get my machine up and running way faster than the other options I had available....
Read more
More
$7.31
- Compare At:
-
$8.77
- You Save:
-
$1.46
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268645
Replacement wheel assembly for dishwasher lower rack. Snaps onto rack to allow smooth gliding along tracks. Replace if cracked, broken, or missing.
Do-It-Yourself Stories from Customers like You
Parts were missing from the dishwasher lower rack Carl P. • Glendale , AZ • March 18, 2017
Parts snapped into place very easily. Appliance Parts Pros have always delivered on the right part, timely delivery and videos to help. I wouldn't go anywhere else.
Read more
More
$49.40
- Compare At:
-
$59.28
- You Save:
-
$9.88
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3385089
The Upper Dishrack Rail is an OEM replacement part for Whirlpool dishwashers. It guides upper racks in and out for easy access to dishes.
Causes of faulty rails can include worn rollers, broken clips, or stress cracks in modules after repeated cycles.
Symptoms of a bad upper dishrack rail include:
- Difficulty inserting or removing the upper rack smoothly
- Off-track movement that impacts washing coverage
- Detached ends or segments that compromise stability
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Wheels my top dishwasher rack fell off Paul M. • Ramona , CA • September 11, 2020
Ordered the parts and followed the instruction videos that Sears provide, Initially tried to order parts from Sears directly but the web-page kept complaining about my shipping address. Their loss- no wonder they're going out of business. Also, should note that the original assembly was plastic but the replacement was metal. Sure sign of a crappy cost-cutting decision. Overall, very happy with Appliance Parts Pros!
Read more
More
$56.95
- Compare At:
-
$68.34
- You Save:
-
$11.39
Genuine Whirlpool part
By: Whirlpool
Part Number: 676413
Fix a detergent dispenser that won't open or close properly with this latch kit. Includes all components for secure closure. 10-15 minute repair.
Do-It-Yourself Stories from Customers like You
Latch would not open consistently on detergent dispenser James G. • Waxhaw , NC • January 12, 2015
Appeared to be two problems: the latch was worn and one of the pins that slid in a guide on the actuator located in the inner panel had broke off. Detergent lid spring and pin appeared to be OK but decided to replace since I was aready working on it. I ordered all the inner panel mechanism from the control arm to the latch actuator on the inner panel. The repair was successful as the detergent dispenser now opens during its cycle.
Read more
More
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3380854
The Latch Bolt is an OEM replacement part for Whirlpool dishwashers. This component is essential for securing the dishwasher door during operation, ensuring that it remains tightly closed to prevent water leaks and allow the dishwasher to run properly. The latch bolt engages with the door latch assembly, creating a secure seal.
Causes of a bad latch bolt can include regular wear and tear, damage from forceful closing of the dishwasher door, or misalignment that affects the latch's engagement.
Symptoms of a bad Latch Bolt include:
- The dishwasher door not staying closed
- Water leaking from the door during operation
- Difficulty in latching or unlatching the door
- The dishwasher not starting because it detects an open door
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
For black lever order WP3369457. For white use WP3369457. For biscuit use 3375062
Do-It-Yourself Stories from Customers like You
The door latch would not catch as a result i was unable to use my dishwasher Joel C. • Shreveport , LA • January 09, 2016
I ordered the Door Switch Kit, along with a few other items. However, the switch kit was all that was needed. Isimply followed the instructions that came with the kit. It was necessary to cut the wires which connected to the wire assembly in the door of the dishwasher. I then connected the pieces from the switch kit and then connected the end pieces to the door. I closed the door, and started up the dishwasher. It worked as well as before.
Read more
More
$54.95
- Compare At:
-
$65.94
- You Save:
-
$10.99