Kenmore Washer 796.41722010 (79641722010, 796 41722010) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10135699
The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.
This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.
Do-It-Yourself Stories from Customers like You
Broken spider assembly; aka washer drum shaft assembly Jeff J. • Los Angeles , CA • November 01, 2015
I followed Matt's awesome video from AppliancePartsPros.com to build up my "I can do this" reserves. But here's the story leading up to that point...
We purchased our Samsung WF419 on a “Black Friday” special November 2009 expecting to get some good years out of the washer/dryer pair. We don’t run more than 2 or 3 loads a week in the washer, so ours has had relatively little use over the beginning of its anticipated and expected long life-cycle. When the “thumping” started on the spin cycle a...
Read more
More
$13.95
- Compare At:
-
$16.60
- You Save:
-
$2.65
Genuine Lg part
By: Lg
Part Number: 5220FR2006H
The Water Inlet Valve Assembly is an OEM replacement part for LG washing machines, designed to control the flow of water into the laundry tub. This part is responsible for opening and closing to allow water into the wash drum at the appropriate times during the wash cycle, providing the correct water level and temperature.
Causes of a bad Water Inlet Valve Assembly can include mineral deposits blocking the valve, electrical failure preventing the valve from opening or closing properly, or physical damage to the valve mechanism itself.
Symptoms of a bad Water Inlet Valve Assembly include:
- Inadequate filling of the washer drum
- Water entering the drum when the washer is off
- Unusual noises during the fill cycle
- Water that is too hot or too cold, indicating a failure in valve operation that controls temperature
This OEM LG part can also be used on Kenmore/Sears appliances.
This part fixes the following symptoms
-
Will not stop filling with water
-
Leaking
-
Shuts off too soon
-
Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You
Lg wm2487hwm laundry machine had cold water overflowing and intermittent cold water operation on lg Bruce S. • Van Nuys , CA • December 13, 2015
Replaced the cold water valve unit (has 4 ports and 1 inlet) which is very straight forward;
requires : 1 phillips screwdriver ~#2
1 needlenose plier, medium size
1 channel lock plier, medium size
1 marker pen
1 - cold water valve assembly # AP4445613
1 - hot water valve assembly #AP4441935
1 - water level pressure switch #AP4440713
an old towel or two for absorbing small amounts of water
a cellphone / camera for making sure you have the...
Read more
More
$48.44
- Compare At:
-
$59.79
- You Save:
-
$11.35
Genuine Lg part
By: Lg
Part Number: 4280EN4001C
The Tub Ball Bearing is an OEM replacement part forLG washing machines. This crucial component supports the inner tub or drum, allowing smooth rotation during the wash and spin cycles.
Symptoms of needing to replace the tub ball bearing include:
- Excessive noise or grinding sounds during operation
- Vibration or shaking of the washing machine
- Difficulty in the tub or drum rotating or spinning
Causes of a faulty tub ball bearing can include normal wear and tear over time, exposure to excessive loads or unbalanced loads, or physical damage due to impact or mishandling.
This OEM LG part is also compatible with select Kenmore washer models.
Do-It-Yourself Stories from Customers like You
Noisy bearings Gerald D. • Belle Vernon , PA • October 18, 2014
Repair went fairly smoothly by following the EXCELLENT how-to video provided. I had only a few issues and suggestions. 1. Because many of the screws and fasteners are of multiple sizes, I would recommend laying them out in a muffin tray or on a paper with labels for where they go back. 2. After removing the weights and prepping to remove the shock absorbers, after the front ones were removed, the tub tilted so far the rear shock absorber separated. The friction pads fell out. It was easy...
Read more
More
$68.78
- Compare At:
-
$81.85
- You Save:
-
$13.07
Genuine Lg part
By: Lg
Part Number: EBF49827801
The Washer Door Lock Switch is an OEM part for LG washing machines. This critical safety feature locks the washer door during operation to prevent it from being opened, which ensures safety and proper functioning. The door lock switch also communicates with the washer's control system to indicate that the door is securely closed and the machine can begin its cycle.
Symptoms of a bad Washer Door Lock Switch include:
- The washing machine refusing to start, despite the door appearing to be closed.
- The door failing to lock properly, or the lock releasing prematurely during a cycle.
- Error messages on the washer's display related to door closure issues.
Causes of a bad door lock switch can include mechanical failures such as worn or damaged locking mechanisms, electrical issues like faulty wiring or failed solenoids, or alignment problems that prevent the door from engaging the switch properly.
This OEM LG part is also compatible with Sears/Kenmore models.
This part fixes the following symptoms
-
Won't start
-
Lid or door won't close
-
Door latch failure
-
Will not agitate
See more...
Do-It-Yourself Stories from Customers like You
E0 code replaced drain pump and circulating motor the door switch assembly was separate issue. Ann M. • Coral Springs , FL • May 09, 2020
Superfast parts delivery. Got packages by the second day. Videos were extremely helpful and well done; we couldn't have done without them although we came across slight differences in our machine and found workarounds. Our machine did not drain the water so I drained the water manually via drain tube at bottom of the machine and checked the filter for blockage. All clear so I read articles on the internet and watched videos and took a chance on replacing the drain pump and circulating motor...
Read more
More
$67.95
- Compare At:
-
$80.18
- You Save:
-
$12.23
Genuine Lg part
By: Lg
Part Number: 4036ER4001B
The Washer Gasket is an OEM replacement part for LG washing machines. It is a flexible seal that lines the opening of the washer tub, creating an airtight barrier to prevent water leaks and ensure proper containment during the wash and spin cycles.
Symptoms of a bad washer gasket include:
- Water leaking from the front of the washing machine
- Excessive moisture or condensation buildup around the gasket area
- Difficulty in properly closing and latching the washer door due to a worn or damaged gasket
Causes of a washer gasket failure can range from general wear and tear over time, to physical damage from being pinched or cracked, to improper installation or alignment issues.
This OEM LG part is also compatible with Sears/Kenmore models.
Do-It-Yourself Stories from Customers like You
Noisy bearings Gerald D. • Belle Vernon , PA • October 18, 2014
Repair went fairly smoothly by following the EXCELLENT how-to video provided. I had only a few issues and suggestions. 1. Because many of the screws and fasteners are of multiple sizes, I would recommend laying them out in a muffin tray or on a paper with labels for where they go back. 2. After removing the weights and prepping to remove the shock absorbers, after the front ones were removed, the tub tilted so far the rear shock absorber separated. The friction pads fell out. It was easy...
Read more
More
$22.95
- Compare At:
-
$27.31
- You Save:
-
$4.36
Genuine Lg part
By: Lg
Part Number: ACA56078801
The Outer Door Boot Seal Clamp is an OEM part for LG washing machines. This clamp secures the outer door boot seal, ensuring a tight seal to prevent water leaks during the wash cycle.
You should replace the outer door boot seal clamp if it becomes damaged or loses its tension, which can happen due to regular use, exposure to harsh cleaning agents, or physical wear and tear.
Symptoms of a bad outer door boot seal clamp include:
- Water leaks from the door area during the wash cycle
- Loose or shifting door boot seal
- Difficulty in closing the washing machine door securely
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
LG front load washer door gasket needed replacement due to mold buildup Howard F. • Port Orange , FL • April 15, 2020
If you have an older model WM8000H_A you MUST pay attention to the type of door gasket (boot seal) that it uses. Every video I could find for replacing the seal on the WM8000HWA involved a different product than what was required for our specific washer. I wound up getting the wrong one by ordering it without help and had to exchange it - after I had the machine taken apart. Thanks to AppliancePartsPros I got the correct seal and front retaining ring the next day.
NOTE! The retaining rings are...
Read more
More
$20.62
- Compare At:
-
$24.74
- You Save:
-
$4.12
Genuine Lg part
By: Lg
Part Number: 6501KW2002B
The Sensor Assembly is an OEM part for LG washing machines. This component is crucial for detecting and monitoring various conditions within the washing machine, such as water level, temperature, and load balance. It ensures the machine operates efficiently and effectively by providing accurate data to the control board.
Causes of a bad sensor assembly can include wear and tear from regular use, exposure to water and detergents, electrical malfunctions, or damage from impact. A faulty sensor assembly can lead to incorrect readings, which can affect the washing machine’s performance and lead to issues such as improper water levels or unbalanced loads.
Symptoms of a bad Sensor Assembly include:
- Incorrect water levels during cycles
- The washing machine stopping mid-cycle or not completing cycles
- Error codes related to water level or load balance
- The machine failing to start or operate correctly
This OEM LG part is also compatible with Sears/Kenmore models.
Do-It-Yourself Stories from Customers like You
Le error code Phil S. • Sumas , WA • February 06, 2016
I watched the Appliance Parts Pro video and saw that it was a job that I could easily do. I ordered the Rotor Position sensor switch for about $21 on a Monday and it was delivered by UPS on Wednesday. The process was straight forward: 1) remove the back cover from the washing machine (4 screws), 2) remove the main bolt holding the magnetic drum on the motor; 3) remove the 6 bolts holding the coil on the motor; 4) remove the ground screw and wire harness clamp screw; 5) take the old sensor...
Read more
More
$56.95
- Compare At:
-
$67.77
- You Save:
-
$10.82
Genuine Lg part
By: Lg
Part Number: 5215ER2002G
The Drain Hose Assembly is an OEM part for LG washing machines. It is a component designed to transport used water from the washer to the drain. This flexible hose assembly ensures that water flows smoothly out of your washing machine after each cycle, preventing leaks and maintaining the efficiency of your appliance.
Causes for replacement can include wear and tear over time, clogs from lint or small items, kinks that restrict water flow, or damage from moving or improper installation.
Symptoms of a bad Drain Hose Assembly include:
- Water leaking from the back or bottom of the washing machine
- Difficulty draining water out of the washer
- Puddles of water forming around the appliance during or after operation
This OEM LG part is also compatible with some Kenmore models.
Do-It-Yourself Stories from Customers like You
Drain hose was leaking on my lg washing machine Terry O. • Temecula , CA • June 12, 2014
I found a video, by another parts vendor, that showed in detail how to dismantle and repair the washer. I wouldn't have known how to even get to the problem without that repair video. Dismantling the washer was easy once I knew how, but would have been like a (litteral) Chinese puzzle without the video. Once I had cracked open the machine and identified the problem, the repair was easy.
I ordered from Appliance Parts Pros because they offered next-day delivery of parts. I had the washer back...
Read more
More
$34.54
- Compare At:
-
$41.10
- You Save:
-
$6.56
Genuine Lg part
By: Lg
Part Number: 4738ER1002A
The Tub to Pump Hose is an OEM replacement part for LG top-load washing machines. This hose safely transports water between the wash tub and drain pump. The hose measures 13 inches in length.
Causes of failure relate to constant flexing under water pressure strains that accumulate over years of usage. Excess minerals in hard water areas promote accelerated breakdown of flexible PVC material.
Symptoms of a cracked or leaking tub to pump hose include:
- Water not draining or taking an abnormally long time
- Water continually accumulating inside the machine cabinet
- Error codes related to drainage issues displayed
- Puddles forming near or under the back of the washer
This genuine LG hose is also compatible with select Sears/Kenmore units as well.
Do-It-Yourself Stories from Customers like You
Tear/hole in the pump hose Chris B. • Lynden , WA • January 12, 2017
First and foremost, much thanks to APP for perfect transaction, and incredible price!
The part was shipped quickly, and arrived fast. Immediate Availability of the part was outstanding, and truly saved this Canadian's day! See, in Canada, LG has their own unfair practice of NOT ALLOWING a Canadian citizen to purchase ANY functional parts for any of their appliances or products... furthermore, in order to get the part for any issue, you must pay directly for an LG direct service tech to come at...
Read more
More
$56.95
- Compare At:
-
$67.20
- You Save:
-
$10.25
Genuine Lg part
By: Lg
Part Number: 4738ER1004B
The Dispenser Hose is an OEM part for LG washing machines. It connects the detergent dispenser to the washer tub, allowing detergent and other cleaning agents to be delivered effectively during the wash cycle.
Causes of a bad dispenser hose can include regular wear and tear, damage from harsh detergents, or physical damage due to kinks, pinches, or impact. Over time, the hose can become brittle, cracked, or clogged, affecting its ability to function properly.
Symptoms of a bad dispenser hose include:
- Leaks or drips from the hose area
- Detergent not dispensing correctly or at all
- Water pooling around the washer
- Visible cracks or splits in the hose
This OEM LG part is also compatible with Sears/Kenmore models.
Do-It-Yourself Stories from Customers like You
It was leaking quite a bit out of the bottom sides and back between the washer and accessory shelf (front loader on top of lg shelf unit) Benjamin M. • Lynchburg , VA • December 12, 2015
****** always make sure the unit is fully unplugged from the power before you do anything with the outside of the unit to work inside of the unit and while you are working inside the unit... Also make sure that you turn the hot and cold water intake valves off and make sure you don't pull too much on the two water intake hoses that lead to your washer because they can leak with too much pressure exerted on either end*******
1. Took top off unit by unscrewing mounting brackets at two similar...
Read more
More
$40.78
- Compare At:
-
$48.53
- You Save:
-
$7.75
Genuine Lg part
By: Lg
Part Number: MDS62058301
The Rear Tub Gasket is an OEM part for LG washing machines. It provides a watertight seal between the rear tub and the front tub assembly, preventing water leaks during the wash and spin cycles. This gasket ensures that water remains contained within the drum, contributing to the overall efficiency and performance of the washing machine.
You should replace the rear tub gasket if it becomes worn out, cracked, or damaged. Causes of a bad rear tub gasket can include general wear and tear, mold or mildew buildup, and damage from foreign objects during washing.
Symptoms of a bad rear tub gasket include:
- Water leaking from the back of the washing machine
- Visible cracks, tears, or deformation in the gasket
- Mold or mildew buildup around the gasket area
- Unusual noises during the wash cycle indicating a loose or misaligned gasket
This OEM LG part is also compatible with certain models of Kenmore washing machines.
Do-It-Yourself Stories from Customers like You
Washing machine was making loud noise that sounded like an engine running and we believed this was caused by a bad bearing Michele P. • Mayville , WI • January 07, 2020
LG Washing Machine WM3885HCCA
I searched the Appliance Parts Pros "Get Repair Help" tab, typed in the LG washing machine model number (WM3885HCCA), watched videos and searched for the parts shown on the diagrams of my LG washing machine. After finding parts, I confirmed on both the Appliance Parts Pros site and LG site that the parts I selected were correct. I highly recommend using the LG site . I was able to type in the original part number from the Appliance Parts Pro site and LG directed...
Read more
More
$44.71
- Compare At:
-
$53.65
- You Save:
-
$8.94
Genuine Lg part
By: Lg
Part Number: 383EER2001A
The Pump Filter Assembly is an OEM replacement part for LG washing machines. It is a crucial component that filters out lint, debris, and other particles from the wash water, preventing them from recirculating and damaging the pump or other internal components.
Symptoms of a need to replace the pump filter assembly:
- Clogging or blockages, leading to poor drainage or water not draining completely
- Excessive buildup of lint, hair, or other debris in the filter screen
- Leaks or water seeping from the filter housing or surrounding area
- Unusual noises or vibrations during the drain or spin cycles, indicating a potential blockage
Causes of a faulty pump filter assembly can include excessive lint accumulation, damage to the filter screen or housing due to impact or mishandling, and general wear and tear over time.
This OEM LG part is also compatible with Sears/Kenmore washing machines.
Do-It-Yourself Stories from Customers like You
Water was leaking around the filter cap on our lg front loading washer and flooded our laundry room John C. • The Villages , FL • May 12, 2015
Unscrewed the leaking filter and replaced with the new one. End of problem. Great service and prices at Appliance Parts Pros.com. This will be the first place I check whenever I need repair parts for any of our appliances in the future.
Read more
More
$22.95
- Compare At:
-
$27.31
- You Save:
-
$4.36
Genuine Lg part
By: Lg
Part Number: 4970FR2084Z
The Suspension Spring is an OEM part for LG washing machines, specifically designed to support the tub assembly and maintain its stability during the wash and spin cycles. This spring plays a critical role in absorbing vibrations and reducing the amount of movement transferred to the washing machine's frame, ensuring smooth and quiet operation.
Causes for a Suspension Spring to fail include normal wear and tear from repeated use, overloading the washing machine beyond its capacity, which can stretch or stress the springs, and corrosion from exposure to moisture and laundry detergents.
Symptoms of a bad Suspension Spring include:
- Increased vibration and noise during the spin cycle.
- The washing machine "walking" or moving from its original position.
- Uneven drum movement, leading to inconsistent washing and spinning.
This OEM LG part can also be used on Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
The drum on the spin cycle made very loud noises and it sounded like a broken suspension spring Tom Z. • Mahwah , NJ • July 23, 2015
I removed the top cover and found the left main suspension spring broken. Appliance Part Pros had the new springs (2 I replaced both) at my door in 26 hours. Excellent service from this company.
After disassembling the drum from the chassis of the machine, it was very easy to replace the springs.
i do wish however that I had purchased a higher quality machine. LG refused to do anything to help and the machine is only 3 years old and gets minimal use.
Hats off however to Appliance Parts Pros....
Read more
More
$44.71
- Compare At:
-
$53.20
- You Save:
-
$8.49
Genuine Lg part
By: Lg
Part Number: EAU61383518
The PUMP MOTOR is an OEM part for LG washing machines. It is an electric motor that powers the pump responsible for circulating water inside the washing machine tub and through hoses during all wash cycles. Efficient water flow is necessary for proper cleaning and rinsing performance.
Causes of a bad pump motor can include mineral buildup inhibiting smooth rotation, worn motor windings affecting current flow, or damage from water damage into the motor housing.
Symptoms of a bad pump motor include:
- Incomplete or failed wash cycles
- Inability to fill or drain properly
- Strange noises emanating from the pump area
- Leaks or water issues related to poor water circulation
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Washer making strange noise got error code and water wouldn't drain from the tub. Joseph V. • Bargersville , IN • September 12, 2017
First off I want to say Appliance Part Pros rock! I have used them for purchasing repair items for other appliances in the past, so when my washer started making weird noises this was my go to source. I thought my problem was likely pump motor related as the water wasn't draining and I could hear the sound of the pump trying to work. After reviewing what others who had similar situations found to be the problem I took a gamble and decided to get the drain pump.
Some who had that problem...
Read more
More
$100.95
- Compare At:
-
$119.12
- You Save:
-
$18.17
Genuine Lg part
By: Lg
Part Number: 4280FR4048Z
The Tub Bearing is an OEM part for LG washing machines. It supports the washer drum, ensuring it spins smoothly and quietly during wash and spin cycles.
Common causes of a bad tub bearing include regular wear and tear from frequent use, exposure to heavy or unbalanced loads, and water damage from leaks. A faulty bearing can lead to noisy operation and reduced efficiency, potentially causing further damage to the washing machine.
Symptoms of a bad tub bearing include:
- Loud noises during the wash or spin cycles
- Excessive vibration or movement of the washer
- Difficulty in spinning or the drum not spinning at all
- Water leaks from the drum area
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Washing machine was making loud noise that sounded like an engine running and we believed this was caused by a bad bearing Michele P. • Mayville , WI • January 07, 2020
LG Washing Machine WM3885HCCA
I searched the Appliance Parts Pros "Get Repair Help" tab, typed in the LG washing machine model number (WM3885HCCA), watched videos and searched for the parts shown on the diagrams of my LG washing machine. After finding parts, I confirmed on both the Appliance Parts Pros site and LG site that the parts I selected were correct. I highly recommend using the LG site . I was able to type in the original part number from the Appliance Parts Pro site and LG directed...
Read more
More
$94.95
- Compare At:
-
$113.94
- You Save:
-
$18.99
Genuine Lg part
By: Lg
Part Number: 5214FR4006G
The Drain Hose is an OEM part for LG washing machines. It is designed to carry used water from the washing machine to the household drain. This hose ensures that water is efficiently expelled from the washer, preventing any overflow or leakage issues.
Causes of a bad drain hose can include cracks or splits due to wear and tear, clogs from debris or residue buildup, and damage from mishandling or improper installation. Such issues can compromise the hose's ability to transport water effectively.
Symptoms of a bad Drain Hose include:
- Water leaks during or after the wash cycle
- The washer not draining properly
- Visible cracks or damage to the hose
- Unpleasant odors due to trapped debris or standing water
This OEM LG part is also compatible with Sears/Kenmore models.
Do-It-Yourself Stories from Customers like You
There was a hole in the tube to pump hose Gary M. • Watkinsville , GA • June 28, 2016
I replaced the Tube to pump hose which was very easy. I just tilted the washer on it side and replaced the Hose.
Read more
More
$11.95
- Compare At:
-
$14.22
- You Save:
-
$2.27