Bosch Dishwasher SHI6902 Parts
Genuine Bosch part
By: Bosch
Part Number: 00618605
The Roller and Cable Assembly is an OEM part for Bosch dishwashers. This assembly includes the roller and cable, which work together to facilitate the smooth operation of the dishwasher door, allowing it to open and close effortlessly.
Over time, the roller and cable can wear out or become damaged due to regular use, friction, or accidental mishandling. If either component fails, it can affect the balance and movement of the dishwasher door, making it difficult to operate.
Symptoms of a bad roller and cable assembly include:
- Difficulty in opening or closing the dishwasher door
- A sagging or misaligned door
- Unusual noises when operating the door
- The door not staying securely in place
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Door too heavy and mounting bracket broken. Jim H. • Minneapolis , MN • September 04, 2017
This turned out to be a major effort, requiring me to disconnect the dishwasher, pull it from the cabinetry and partially disassemble the dishwasher to replace the door closer pulley
Read more
More
$84.47
- Compare At:
-
$101.36
- You Save:
-
$16.89
Genuine Bosch part
By: Bosch
Part Number: 00171598
Seals connection between pump and sump to prevent leaks during wash cycles. Replace if water pools under dishwasher or pump noise occurs.
Do-It-Yourself Stories from Customers like You
The machine would not enter the wash cycle or would try John D. • Tewskbury , MA • April 20, 2018
Hearing a metal on metal noise and not actually circulate water cancelling cycle worked fine After some web research, I concluded it was highly likely to be the circulation pump, so I watched the video on AppliancePartPros.com and realized it was a lengthy repair (a lot of steps) but not technically difficult. I simply played and paused the video at each step and duplicated the steps.
The biggest things to take note of:
1) take good pictures of the wiring to use when you re-connect.
2) Wear...
Read more
More
$30.95
- Compare At:
-
$36.52
- You Save:
-
$5.57
Genuine Bosch part
By: Bosch
Part Number: 00165254
Replacement end cap stops for dishwasher upper rack rails. Clips onto rail ends to keep rack on track. Order when original caps are cracked or missing.
Do-It-Yourself Stories from Customers like You
Dish rack stop broke Gregory B. • Bayside , NY • September 23, 2019
Ordered the part, it was delivered quickly, back in business.
Thanks
Read more
More
$14.73
- Compare At:
-
$17.53
- You Save:
-
$2.80
Genuine Bosch part
By: Bosch
Part Number: 00263102
Seals the dishwasher sump to prevent water leaks during wash cycles. Replace if you notice leaking at the base or constant drain pump operation.
Do-It-Yourself Stories from Customers like You
Bosch shv4304 water leaking into base and drain pump running constantly Jonathan F. • Highland , NY • February 05, 2018
I replaced the gaskets with products from this site which I would not have been able to do without the video on this site. Hard job. The leak was still there though, so I have some hints with this kind of washer. 1) There is a float switch on the base that turns on the drain pump when there is a leak, that is why the drain pump runs constantly, it prevents catastrophic flooding in many cases. The float consists of a little styrofoam donut that lifts an arm, all white. The arm is connected to a...
Read more
More
$28.95
- Compare At:
-
$34.16
- You Save:
-
$5.21
Genuine Bosch part
By: Bosch
Part Number: 17008311
Traps food particles and debris during wash cycles to keep water clean. Replace if clogged with buildup or if plastic retainer fails. Verify fit by model.
Do-It-Yourself Stories from Customers like You
11 years old and all plugged up Richard R. • Boyds , MD • August 15, 2015
The wash arms and filters were plugged with calcium and no longer spraying. Needless to say this impacts cleaning. The replacement parts were top quality and fit perfect. This simple replacement of parts put new life in trusty Bosch.
Read more
More
$59.52
- Compare At:
-
$61.08
- You Save:
-
$1.56
Genuine Bosch part
By: Bosch
Part Number: 00166637
Seals the detergent dispenser to prevent leaks and ensure proper release during wash cycles. Replace if detergent leaks or dispenser malfunctions.
Do-It-Yourself Stories from Customers like You
Soap dispenser not opening Matt L. • Morrisville , VT • January 19, 2018
Replaced dispenser.
It was hard to snap into place. You don't need to order separate gasket it comes with it.
Read more
More
$14.95
- Compare At:
-
$17.79
- You Save:
-
$2.84
Genuine Bosch part
By: Bosch
Part Number: 00166625
The Sealing is an OEM replacement part for Bosch brand dishwashers. Located on the perimeter of the small rinse aid compartment door, this resilient rubber piece forms an essential water-tight seal when the dispenser is closed.
Symptoms of a potentially problematic rinse aid door sealing include:
- Leakage or spills within the rinse aid reservoir
- Mineral deposits or residue build up inside the compartment
- Cracks, tears, or deformation of the sealing material
Causes of a faulty rinse aid door sealing can be repetitive opening/closing stress breaking down pliability long-term. Exposure to chemical vapors from the rinse aid may also degrade sealing properties.
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Rinse aid door wouldn't close on Bosch dishwasher Ellen M. • Alamo , CA • June 28, 2019
Ordered rinse aid door w/ gasket to replace the broken one
Read more
More
$12.95
- Compare At:
-
$15.54
- You Save:
-
$2.59
Genuine Bosch part
By: Bosch
Part Number: 00088403
2 clamps included.
Do-It-Yourself Stories from Customers like You
Missing part to reinstall dishwasher to disposal James I. • Rochester , NY • October 07, 2014
ORDERED TUBE AND CLAMPS
Read more
More
$19.21
- Compare At:
-
$22.67
- You Save:
-
$3.46
Genuine Bosch part
By: Bosch
Part Number: 00165263
Plastic cover that protects the drain pump mechanism from debris. Replace if cracked, broken, or tabs are bent preventing proper seal during drain cycles.
Do-It-Yourself Stories from Customers like You
No spray during wash cycle pump impeller was broken. Robert K. • Cazenovia , NY • February 22, 2019
Watched AppliancePartsPros video, disassembled the dishwasher and replace impeller and seals.
Read more
More
$12.16
- Compare At:
-
$12.92
- You Save:
-
$0.76
Genuine Bosch part
By: Bosch
Part Number: 00165281
Fix dishwasher not heating or running for hours. This NTC temperature sensor monitors water temp and prevents overheating. Moderate DIY repair with video.
Do-It-Yourself Stories from Customers like You
Bosch dishwasher not heating water or drying dishes machine cycled for 3+ hours Tom B. • Arcade , NY • July 05, 2015
Ordered new heater/thermostat piece.
Read more
More
$93.89
- Compare At:
-
$103.28
- You Save:
-
$9.39
Genuine Bosch part
By: Bosch
Part Number: 00165279
This turbidity sensor detects how clear the dishwasher's wash water is so the control can adjust cycle time, rinses, and water changes. Replacing a faulty sensor helps restore proper cleaning performance and normal cycle lengths.
- Monitors soil level/clarity of the wash water
- Signals the control to extend or shorten wash and rinse phases as needed
- Helps optimize water use while maintaining cleaning results
- Failure symptoms can include unusually long or short cycles, poor cleaning, repeated draining/refilling, or cycles that won't advance
What's included: 1 turbidity sensor assembly Install notes:
- Disconnect power and turn off the water supply before servicing
- Pull the dishwasher out as needed; access the sensor from the base area
- Place a towel to catch residual water; release the locking tab or twist-lock, unplug the connector, and install the new sensor fully seated and locked
- Restore power/water and run a test cycle; check for leaks
Do-It-Yourself Stories from Customers like You
Washing cycle was getting longer and longer Donald W. • Avon , IN • August 21, 2020
Replaced the turbidity sensor. I watched the video on how to replace the sensor. It took me a little longer than what service rep. said. But I finely finished the repair and now my wife has been using the dishwasher for the past week. I kept checking for leaks but so far so good. Thank you Appliance Parts Pros for your help. I installed the sensor on 08/18/2020. Don
Read more
More
$50.95
- Compare At:
-
$60.63
- You Save:
-
$9.68
Genuine Bosch part
By: Bosch
Part Number: 00350321
Replacement water feed tube that delivers water to the upper spray arm in your dishwasher. Replace if cracked, split at seams, or leaking due to wear.
Do-It-Yourself Stories from Customers like You
Dishes were not getting clean Dorman P. • Ponte Vedra Beach , FL • October 18, 2014
After we saw that progressively our dishes were not getting clean we investigated the condition of the spray arms and this upper feed tube assembly. We found a huge crack on the side of this piece and new not enough water was getting to the arms. We also noticed a build up of soap and lime. So we ran a cycle of vinegar and sprayed the filters and arms with lime-off-sprayed them out with a air hose "completely". Many of the small pieces of lime will clog the holes in the spray arms. Attached the...
Read more
More
$81.39
- Compare At:
-
$96.04
- You Save:
-
$14.65
Genuine Bosch part
By: Bosch
Part Number: 00165331
O-ring seal prevents leaks between dishwasher components. Replace when you notice water drips or moisture buildup. Confirm fit with your model number.
Do-It-Yourself Stories from Customers like You
We had water that wouldn't completely drain from the dishwaser Melanie D. • Syracuse , UT • June 05, 2015
WE replaced the drain pump and it still wouldn't drain sometimes. Finally we realized that the drain hose wasn't the correct bosch hose and the rubber was starting to bend and kink where it went through the hole to under the sink.So we bought the drain hose and replaced.
Read more
More
$13.95
- Compare At:
-
$16.46
- You Save:
-
$2.51
Genuine Bosch part
By: Bosch
Part Number: 00165301
The Float is an OEM part for Bosch dishwashers. This float senses water levels inside the dishwasher, signaling the inlet valve to refill when needed.
Causes of a float malfunctioning can be mineral deposits accumulating and weighing it down over time, or cracks in the plastic housing allowing water in.
Symptoms of a bad float include:
- The dishwasher not filling or filling slowly
- Error codes related to fill issues
- Improper water levels impacting wash results
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
Do-It-Yourself Stories from Customers like You
Flood switch was stuck in on position drain pump would not turn off. Rick V. • Burlington , IA • April 05, 2017
Replaced the defective float switch.
Read more
More
$10.42
- Compare At:
-
$11.46
- You Save:
-
$1.04
Genuine Bosch part
By: Bosch
Part Number: 00167241
Secures the dishwasher sump or sump cover to the tub for a tight, leak-resistant seal. Replace if missing, stripped, or damaged to restore stability.
More
$5.52
- Compare At:
-
$6.07
- You Save:
-
$0.55
Genuine Bosch part
By: Bosch
Part Number: 00166635
Wax motor for detergent/rinse-aid dispenser.
Do-It-Yourself Stories from Customers like You
Soap dispenser door wouldn't open David H. • San Francisco , CA • May 15, 2015
Took door off, saw that dispenser linkage was ok, I could open and close by hand, so figured the wax motor or the wiring to it were most likely the problem. I took off the wax motor ( actuator) and ran 120 volts to it via jumper wires, and it did not move at all, so figured good chance that was the problem. Found part # on your site, received new one quickly from you, put it in and works great. Thanks.
Read more
More
$29.68
- Compare At:
-
$35.32
- You Save:
-
$5.64