Kenmore Refrigerator 106.51599010 (10651599010, 106 51599010) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2260518W
Replacement cap that seals the water filter housing and attaches to filter cartridges. Needed when cap is cracked, broken, or missing notches prevent secure fit.
Do-It-Yourself Stories from Customers like You
Both lugs on refrigerator water filter cap broke apparently due to age induced brittleness would not pull water filter out of refrigerator William F. • Birmingham , AL • June 01, 2016
Replaced filter cap with new one. The minor challenge was to find a method of pulling the filter out of refrigerator (which is normally done by pulling on the filler cap. The filter was recessed to far into the refrigerator for me to be able attach the new cap. I had to find another tactic to remove the filter. The solution was to look at the replacement filter to notice where two slots were located at the end of the filter. I then used a paint can opener (found at most paint stores) to slip...
Read more
More
$34.75
- Compare At:
-
$41.70
- You Save:
-
$6.95
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2198633
Protective cover for the ice maker's infrared emitter sensor in the freezer compartment. Replace if cracked, broken, or missing to shield the sensor.
Do-It-Yourself Stories from Customers like You
Broken emitter cover from ice maker replacement Jeff K. • Derry , NH • February 03, 2015
Followed the video you provided.
Read more
More
$32.64
- Compare At:
-
$38.52
- You Save:
-
$5.88
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2195051
The Dispenser Arm Strain Relief is an OEM replacement part for Whirlpool side-by-side refrigerators. It connects the water and ice dispenser arm to the fridge cabinet, absorbing tension during use.
Causes of a bad strain relief involve wear and flexing fatigue of the plastic over extensive dispensing cycles. Exposure to moisture or liquid damage inside the fridge liner may prematurely degrade connecting parts as well.
Symptoms of a bad strain relief include:
- Cracks, splits, or tears in the relieving plastic material
- Dispenser arm separation from the cabinet opening
- Missing pieces that compromised structural integrity
- Difficulty accessing or using the refrigerator's water/ice functions
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore side-by-side refrigerator models.
Do-It-Yourself Stories from Customers like You
In door water dispensor Brian C. • Pve , CA • June 27, 2016
With the help of the fantastic videos provided on the web site for each replacement part, it was extremely easy to complete the repair
Read more
More
$9.56
- Compare At:
-
$10.52
- You Save:
-
$0.96
Genuine Whirlpool part
By: Whirlpool
Part Number: WP488729
This screw is used to secure the handle end cap to the center of the door. The screw size measures 8-18 x 1/2 inches.
Do-It-Yourself Stories from Customers like You
The lint catch was broken Misti P. • Spokane , WA • January 18, 2019
This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one.
Read more
More
$7.94
- Compare At:
-
$8.83
- You Save:
-
$0.89
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10190929
The Ice Mold is an OEM part for Whirlpool refrigerators. This component forms the ice cubes in the icemaker, shaping the water into cubes as it freezes. The ice mold is crucial for the efficient production of ice, ensuring that each cube is properly formed and easily released into the ice bucket.
You should replace the ice mold if it shows signs of wear or damage. Causes of a bad ice mold can include mineral buildup from hard water, physical damage to the mold surface, or malfunctioning heating elements that prevent ice from releasing properly.
Symptoms of a bad Ice Mold include:
- Ice cubes not forming correctly or being irregular in shape
- Ice cubes sticking to the mold and not dispensing
- The icemaker not producing ice at all
- Leaks around the icemaker area
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Ice forming in the ice cube bin Bill J. • Scottsdale , AZ • December 13, 2014
I have a Whirlpool Side-by-side Model ED22PWXBW01. A year ago, the ice cubes started freezing together in the rear of the ice bin for no apparent reason. Although the problem started off small, it gradually grew much worse, and finally I could see water dripping out of the ice mold and into the bin during the fill cycle. Re-levelling the refrig didn’t help, nor did adjusting the cube size / fill level.
With guidance from the video, I removed the icemaker from the wall of the freezer. The...
Read more
More
$162.27
- Compare At:
-
$193.10
- You Save:
-
$30.83
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2176759
Refrigerator warm but freezer cold? Noisy evaporator fan? This mounting grommet reduces vibration and noise. Takes about 1 hour to replace with video guide.
Do-It-Yourself Stories from Customers like You
Freezer cold but refrigerator warm. Michael D. • Windham , NH • May 04, 2018
I could not be happier with my Appliance Parts Pros experience. I googled my symptoms, and the 2nd result was a video from Appliance Parts Pros describing what the problem might be and exactly how to fix it. There was such a close match between my symptoms and the description that I ordered the parts --- with a 365 day return policy, my risk was limited.
Almost too good to be true, the parts arrived next business day! I took it slow (about an hour) to install the new evaporator fan motor,...
Read more
More
$7.34
- Compare At:
-
$8.07
- You Save:
-
$0.73
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10307490
Horizontal metal rod that secures glass shelf panels inside your refrigerator door. Replace if broken, bent, or missing to prevent shelf slippage.
Do-It-Yourself Stories from Customers like You
Broken part Elaine K. • Elgin , IL • August 12, 2019
Cut piece to fit
Read more
More
$19.31
- Compare At:
-
$22.98
- You Save:
-
$3.67
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2188919
Ice won't dispense or auger not turning? This drive shaft holder secures the ice maker shaft for proper rotation. Easy 10-minute DIY fix with video guide.
Do-It-Yourself Stories from Customers like You
Ice would not dispense Annie V. • Missouri City , TX • February 23, 2016
My refrigerator was not dispensing ice. I could hear the motor activating but noticed the ice auger was not turning. My old drive shaft was stripped on both ends. Video was very helpful and it was an easy fix for someone with little handyman experience.
Received my order much faster than expected! The parts arrived the next day and paid for the standard shipping charge. I live in Texas.
Read more
More
$7.34
- Compare At:
-
$8.07
- You Save:
-
$0.73
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10276792
The Water Reservoir Tubing is an OEM replacement part for Whirlpool refrigerators. It is a flexible plastic tubing that replaces the water reservoir and holds the water for the ice maker and dispenser.
Causes can include cracks from heat or cold exposure over time, punctures from sharp edges during installation, or deterioration of plastic tubing that impacts integrity.
Symptoms of bad water reservoir tubing include:
- Inaccurate or inconsistent ice production
- Leaks or water spills near the reservoir or ice maker
- Kinks or ruptures in the tubing that obstruct water flow
- Mineral buildup that clogs or restricts the line
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.
Note: As per manufacture this is no longer a tank. The tank style has been updated with coiled tubing.
Do-It-Yourself Stories from Customers like You
Water in refrigerator dispenser smelled like rotten eggs Dale L. • Phoenix , AZ • July 29, 2018
Replaced water reservoir that had become contaminated with ??? Also had to replace the water filter, because the water contaminated it also. Cost was about $150, for two filters and the reservoir. The first filter was replaced because I did not know the reservoir was contaminated, and no water was coming out of the dispenser. Since the water in the ice maker did not come through the reservoir, there was no smell or contamination there. The new filter enabled water to come through the dispenser,...
Read more
More
$78.40
- Compare At:
-
$93.30
- You Save:
-
$14.90
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10289690
Cracked or missing ice maker cover exposing internal components? This protective cover shields the ice maker assembly. Simple DIY install in minutes.
Do-It-Yourself Stories from Customers like You
Ice maker quit working Peter S. • Lawton , MI • October 29, 2015
Replaced icemaker and shutoff arm. Easy project.
Read more
More
$7.94
- Compare At:
-
$8.90
- You Save:
-
$0.96
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489497
Factory screw secures panels, brackets, and internal components in refrigerators and freezers. Replace missing, rusted, or stripped screws for secure fit.
Do-It-Yourself Stories from Customers like You
Missing hinges to hold the door up Sandra C. • Gardena , CA • June 05, 2016
Found the parts in the diagram of my fridge and simply installed it very easy
Read more
More
$11.78
- Compare At:
-
$14.02
- You Save:
-
$2.24
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2196003
Refrigerator not cooling consistently or compressor short cycling? This thermostat capillary tube shield protects temperature sensing. DIY repair.
Do-It-Yourself Stories from Customers like You
The unit was not keeping suitable temperature if you tapped the cold control(thermostat) it would come on for one complete cylce Thomas J. • Destin , FL • February 12, 2016
Replacing the cold control solved the problem. While i was at it i also replaced the defrost timer and installed a new ice door.
Read more
More
$7.34
- Compare At:
-
$8.07
- You Save:
-
$0.73
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2315559
This coupling sleeve connects and protects the drive shaft that powers your appliance's auger or rotating mechanism. It provides a flexible connection that absorbs vibration while transferring rotational power between shaft sections. Replace this coupling if you hear grinding noises, experience reduced performance, or if the auger stops turning completely.
Do-It-Yourself Stories from Customers like You
Ice maker auger drive shaft was slipping Timothy O. • Longwood , FL • January 11, 2016
Added a new shaft as the old shaft had worn down...........works perfect now. Thank you
Easy fix ....no more than 10 mins.
Read more
More
$47.41
- Compare At:
-
$56.42
- You Save:
-
$9.01
Genuine Whirlpool part
By: Whirlpool
Part Number: 4387478
Refrigerator light won't turn on? This light socket kit restores interior lighting when bulbs won't work. Simple DIY repair with video guide.
Do-It-Yourself Stories from Customers like You
The refrigerator light didn't work Maria V. • Sonoma , CA • November 21, 2014
I saw your video on you tube and it seems very easy to do it my self, so I ordered the parts and I did it my self. It was very easy. Thank you for sharing with us on how to did it. One more thing, the parts arrived on the time they said it would come.
Read more
More
$54.25
- Compare At:
-
$65.10
- You Save:
-
$10.85
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10318961
The Wire Shelf is an OEM part for Whirlpool refrigerators. This shelf provides additional storage space within the refrigerator, allowing for the organization and easy access of various food items.
Causes of a bad wire shelf can include frequent heavy loading, accidental impacts, or general wear and tear over time.
Symptoms of a bad wire shelf include:
- Bent or warped wires
- Coating peeling off the wires
- Difficulty fitting the shelf securely into place
- Reduced storage capacity due to instability
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Not enough freezer shelves Barbara P. • Ocala , FL • October 31, 2015
Very disappointed that WHIRLPOOL was too cheap to put enough shelving in the new refrigerator/freezer we just bought.
Thankfully, I found an additional wire rack here at Appliance Parts Pros and it fit perfectly ! No problem to install, all you do is fit it into the slots in the freezer wall.
Read more
More
$61.56
- Compare At:
-
$73.26
- You Save:
-
$11.70
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10170540
Shoulder bolt screw that secures refrigerator door handles. Replace if missing, stripped, or loose to restore proper handle attachment and alignment.
Do-It-Yourself Stories from Customers like You
Broken handle for freezer door George J. • Southfield , MI • August 24, 2025
Replaced broken handle
Read more
More
$11.78
- Compare At:
-
$14.02
- You Save:
-
$2.24