Kenmore Washer 110.47561600 (11047561600, 110 47561600) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10143586
Fix F30 error codes and non-dispensing detergent drawers. This dispenser motor assembly controls detergent release timing. 30-minute DIY repair with video.
Do-It-Yourself Stories from Customers like You
F30 error code Lawrence L. • Fallbrook , CA • September 20, 2019
My appliance is a Kenmore, and even though the video mentioned lots of other brands, it showed the exact same problem I was having. My dispenser motor just spun and spun, never stopping at the various positions it was apparently supposed to. Then it would trip the F30 code. The part description again mentioned these other brands but did say in fine print it fits some Kenmore products. I could tell visually from the video the part was the same as on my washer so I felt confident the part...
Read more
More
$89.95
- Compare At:
-
$107.94
- You Save:
-
$17.99
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10114608
The Drain Hose is an OEM replacement part for Whirlpool washing machines. It connects the washer tub to the drain pipe, facilitating the drainage of water after a wash cycle is complete.
Causes of a bad drain hose can include regular wear and tear, blockages from debris or lint, cracks or splits due to aging, or damage from improper installation or handling. A compromised drain hose can lead to water leaks and drainage issues.
Symptoms of a bad drain hose include:
- Incomplete water drainage after cycles
- Puddles or leaks near the base of the washer
- A blocked or restricted flow through the hose
- Detached or disconnected hose ends
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The drain hose cracked and sprung a leak Linda W. • Mt. Ulla , NC • May 25, 2014
This hose did not just attach to the back of the washer--that would have been too easy. This hose went into the back of the washer, under the tub & attached to the pump at the front of the washer. Both the back & front of the washer had to be removed to access the hose. Luckily the crack was at an external spot where it was easily seen; unluckily my husband was out of town at the time & I had to take the washer apart & put it back together. Actually it was not that hard. Before I took the...
Read more
More
$51.46
- Compare At:
-
$61.75
- You Save:
-
$10.29
Genuine Whirlpool part
By: Whirlpool
Part Number: W10739670
The Shock Absorber Kit is an OEM part for Whirlpool washing machines. This kit includes 4 shock absorbers designed to reduce vibrations and absorb shocks during the washing and spinning cycles, providing stability and minimizing excessive movement of the washer drum.
Causes of a bad shock absorber can include wear and tear from regular use, exposure to heavy loads or unbalanced loads that put excessive strain on the absorbers, or damage due to impact or mishandling.
Symptoms of a bad shock absorber kit include:
- Excessive shaking or vibrating during the wash cycle
- Loud banging noises
- The washer moving or "walking" during operation
- Leaks due to increased stress on the tub and other components
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Washing machine was shaking vibrating Victoria P. • Henderson , NV • February 11, 2016
I tube what could be the cause. Took apart the washer and ordered the parts. Put parts in.
Read more
More
$184.37
- Compare At:
-
$219.40
- You Save:
-
$35.03
Genuine Whirlpool part
By: Whirlpool
Part Number: WP356138
The Spring Tension Hose Clamp is an OEM part for Whirlpool washing machines. It is designed to secure hoses in place, preventing leaks by maintaining consistent tension on the hose connections.
Over time, spring tension hose clamps can lose their effectiveness due to metal fatigue, corrosion, or damage from frequent tightening and loosening. This can lead to leaks and improper hose connections.
Symptoms of a bad spring tension hose clamp include:
- Water leaks around hose connections
- Loose or disconnected hoses
- Unusual noises or vibrations during operation
- Water pressure issues within the washing machine
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Water leak Steven K. • New City , NY • August 10, 2018
Took off cover, installed new parts.
Read more
More
$9.41
- Compare At:
-
$11.20
- You Save:
-
$1.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8540015
Rubber vent hose that connects the wash tub to the dispenser, allowing air circulation. Replace if cracked, leaking, or detached from the tub assembly.
Do-It-Yourself Stories from Customers like You
Washing machine leaking from water inlet and temperature sensor seal Richard H. • Park Ridge , NJ • March 21, 2015
Removed the leaking hoses and seal. Installed the new ones. They all fit perfectly. The disassembly/reassembly of the washer took the most time.
Read more
More
$33.27
- Compare At:
-
$39.59
- You Save:
-
$6.32
Genuine Whirlpool part
By: Whirlpool
Part Number: 280159
Suspension spring kit for washers. Supports tub weight and absorbs vibrations. Replace if springs are broken, stretched, worn, or missing. Includes 2 springs.
Do-It-Yourself Stories from Customers like You
The problem was that the counter wieght was broke springs replaced shock absrobor Peter M. • Houston , TX • May 08, 2016
First remove the back from the washing machine. Top of the machine came off simple. To replace springs, I took a crow bar but it on the right side underneath where one of the springs should be. Lift the tumbler up remove and replace the spring. Did the same thing to the other side. On the tumbling unit there are spaces for three shock absorbers. Mine only had one shock in the middle. I put two new springs, one in the front and one in the rear. Then I replaced the right side spring with two new...
Read more
More
$50.43
- Compare At:
-
$60.01
- You Save:
-
$9.58
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8540360
Replaces broken or cracked drum baffle in front-load washers. Lifts and tumbles clothes during wash cycle. Snaps into drum interior. Easy DIY install.
Do-It-Yourself Stories from Customers like You
Baffle broke of inside the drum of our duet washer Ivan P. • Upper Sandusky , OH • November 11, 2014
After doing quite a bit of research and asking appliancepartpros forum if I needed to add a screw when installing, and receiving the answer the next day that is was not necessary, I snapped the part in place and went on with life.
Read more
More
$64.22
- Compare At:
-
$75.78
- You Save:
-
$11.56
Genuine Whirlpool part
By: Whirlpool
Part Number: WP89503
Size: 5 foot long. Rubber fill hose used on most automatic washing machines. Two hoses used per machine.
Do-It-Yourself Stories from Customers like You
Low water flow and fabric softener would dispense immediately when cycle started Bob G. • Sylacauga , AL • January 19, 2019
Replaced flow meter and control valve
Read more
More
$18.59
- Compare At:
-
$22.12
- You Save:
-
$3.53
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3359452
This locking nut is used for many purposes on a range of machines including household appliances. This nut is often used for leg leveling for machines. It will help with vibrations from washers and dryers. If the nut is used for this purpose and goes missing or becomes damaged, it could cause the machine to vibrate more and seem louder.Nuts are made from metal and are built to last a long time. However, there can still be issues that arise. In some cases, the nuts might go missing if they become loose and the machine is moved. They could also corrode over time and need to be replaced. The replacement of the nut is typically a fast and simple repair.The nut is a genuine OEM replacement part sourced from the manufacturer. It can work with washers, dryers, and combo machines, and is compatible with models from Whirlpool, Kenmore, Maytag, and Roper. The part is sold individually. Owners may want to have several on hand.
Do-It-Yourself Stories from Customers like You
Whirlpool washer was shaking and moving in spin cycle Charles B. • Sioux Falls , SD • September 25, 2018
Replaced 2 springs and brackets. Also replace rear legs and front legs and re leveled. Works fine.
Read more
More
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8540402
Fix water leaking from your detergent drawer. This dispenser holds and releases detergent, softener, and bleach at the right time. Easy DIY repair.
Do-It-Yourself Stories from Customers like You
While moving my washer i broke the detergent drawer Mitchell A. • Greer , SC • March 14, 2017
I was moving my washer and dryer on to a platform when the washer slipped and the drawer came out and broke. I was going to surprise my wife with this new setup. She was out of town and was due back in 3 days. I didn't want her to see my mistake. I got on line and found AppliancePartsPros.com and I am glad I did. Their price was reasonable and fair. I order the parts I needed late on Wednesday and they were delivered early on Saturday. I watched their self help video on how to replace the parts...
Read more
More
$95.95
- Compare At:
-
$113.22
- You Save:
-
$17.27
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10405608
Fix F20 error codes and water level issues with this washer air chamber. Connects to the pressure switch hose to regulate water fill. Easy DIY repair.
Do-It-Yourself Stories from Customers like You
Washer f 20 error code Kerry E. • Union , KY • November 22, 2015
After having a technician come to look at my washer, diagnosing the problem, and then not having the part to fix it (which would've taken another week or so after the washer was down at this point for a week and a half) I decided I could fix it myself. The problem ended up being the styrofoam piece that was meant to protect the hose from rubbing on anything didn't do it's job. The result ended up causing a pin hole size puncture in the hose which was allowing air to escape. That hose, along...
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP696392
Secure dryer vent hose to exhaust outlet and wall connection. Replace worn clamps to prevent duct slippage and maintain proper airflow. Confirm fit.
More
$4.76
- Compare At:
-
$5.71
- You Save:
-
$0.95
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8540725
Factory mounting screw secures panels, brackets, hinges, and covers on your washer. Replace missing, stripped, or rusted screws to restore secure fit.
Do-It-Yourself Stories from Customers like You
Broken door latch. Pamela J. • Lawrenceville , GA • November 10, 2017
The replacement part and YouTube video allowed me to repair my washer in less than 10 minutes.
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP616099
This hose clamp secures a hose connection to prevent leaks and keep your appliance running smoothly. It provides a tight, reliable hold on the hose fitting so water or air stays contained during operation.
- Tightens around a hose and fitting to maintain a secure seal
- Helps stop drips, seepage, or loose connections
- Common fix when you see moisture around a hose joint
- Useful if a clamp is rusted, stretched, or no longer holding tension
What's included: One hose clamp. Install notes:
- Unplug power and shut off water (if applicable) before servicing
- Note clamp position/orientation before removal
- Use appropriate screwdriver or nut driver to tighten evenly
- Do not overtighten—ensure a snug, leak-free seal without damaging the hose
Do-It-Yourself Stories from Customers like You
Water leak Steven K. • New City , NY • August 10, 2018
Took off cover, installed new parts.
Read more
More
$9.95
- Compare At:
-
$11.59
- You Save:
-
$1.64
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8540393
The dispenser actuator cam links the actuator to the dispenser mechanism, converting movement into a precise release. Replacing a worn or broken cam restores smooth, reliable dispensing and helps prevent incomplete or erratic operation. What it does:
- Transfers actuator motion to engage or release the dispenser mechanism
- Maintains correct alignment and travel for consistent operation
- A worn or broken cam can cause the dispenser not to open/close, feel loose or sticky, or make unusual clicking noises
- Common corrective part when the actuator moves but the dispenser doesn't function properly
What's included:
Install notes:
- Disconnect power; turn off water supply if applicable before servicing
- Access the dispenser assembly per your model; note linkage/spring orientation (take photos) before removal
- Align the new cam carefully—do not force; verify smooth actuator travel by hand
- Reassemble and test operation before finalizing
Do-It-Yourself Stories from Customers like You
The dis switch was hanging up Joseph S. • Columbus , NC • March 24, 2015
I replaced the Switch.
Read more
More
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Genuine Whirlpool part
By: Whirlpool
Part Number: W11252474
Replacement water hose for washers. Restores leak-free water flow between internal components. Replace if leaking or causing error codes. Verify fit.
Do-It-Yourself Stories from Customers like You
Washer f 20 error code Kerry E. • Union , KY • November 22, 2015
After having a technician come to look at my washer, diagnosing the problem, and then not having the part to fix it (which would've taken another week or so after the washer was down at this point for a week and a half) I decided I could fix it myself. The problem ended up being the styrofoam piece that was meant to protect the hose from rubbing on anything didn't do it's job. The result ended up causing a pin hole size puncture in the hose which was allowing air to escape. That hose, along...
Read more
More
$20.61
- Compare At:
-
$24.53
- You Save:
-
$3.92