Kenmore Refrigerator 253.63764304 (25363764304, 253 63764304) Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 5308000010
The Evaporator Fan Blade is an OEM part for Frigidaire refrigerators, designed to circulate air over the refrigerator coils and through the food compartment. The fan blade works in conjunction with the evaporator fan motor, and together, they play a key role in the cooling process by distributing cool air evenly throughout the refrigerator and freezer.
Causes of a bad evaporator fan blade can include physical damage, such as cracks or bends in the blade itself, which can occur over time due to wear and tear or during cleaning and maintenance.
Symptoms of a bad Evaporator Fan Blade include:
- Unusual noises coming from the refrigerator, such as humming or buzzing
- The refrigerator or freezer compartment is not cooling adequately
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
1: loud noise on freezer side. 2: no water dispensing Matt M. • Pickett , WI • February 05, 2021
1. After hearing a loud noise on the freezer side of unit about halfway up, I started investigating what it could be? My conclusion was evaporator motor or evaporator fan blade. One of the signs of this issue was a distinct change in sound when I opened the freezer door. I ordered a new motor and blade, not knowing exactly what it was.
2. I couldn't get water to dispense, so I changed the filter and that wasn't the problem. I ordered a water valve and crossed my fingers. These parts arrived...
Read more
More
$47.95
- Compare At:
-
$57.06
- You Save:
-
$9.11
Genuine Frigidaire part
By: Frigidaire
Part Number: 240530811
The Meat Pan is an OEM part for Frigidaire refrigerators. This drawer is specifically designed to store meats and other perishables at an optimal temperature within your refrigerator. Its placement often allows for slightly different temperature conditions than the rest of the refrigerator, helping to keep meats fresher for longer. This bin measures approximately 18 inches long and 13 inches wide,
Symptoms of a failing meat pan include:
- Cracks or breaks in the pan that compromise its structural integrity
- Difficulty sliding the pan in and out due to damage or warping
- The pan not sealing properly, which can affect temperature regulation within the compartment
Causes of meat pan damage usually stem from overloading the drawer beyond its capacity, frequent and forceful use, or accidental damage from items being dropped on or in it.
This OEM part is compatible with Kenmore, Frigidaire, Crosley, Westinghouse, Electrolux, Kelvinator, and Gibson brands.
Do-It-Yourself Stories from Customers like You
Broken meat pan hangers and drawers Christine T. • West Chester , PA • September 19, 2017
I removed the meat drawer and shelving unit. I unscrewed the Philips head screws on either side of the shelf brackets. I cleaned the old surfaces and fitted the new plastic hangers in place. I screwed the new hangers in place with the screws I had from the old ones. It was very easy, except the holes in the plastic hanger are not quiet big enough for the screws. I had to push very hard with the screwdriver, and started to strip the head of the screw as well at the screwdriver itself. I did...
Read more
More
$93.95
- Compare At:
-
$141.91
- You Save:
-
$47.96
Genuine Frigidaire part
By: Frigidaire
Part Number: 241537103
The Cold Control is an OEM part for Frigidaire refrigerators. It regulates the temperature inside the fridge and freezer compartments by controlling the compressor, evaporator fan, and cooling vents. Proper cooling depends on the cold control operating reliably.
Symptoms of a bad cold control include:
- Fluctuating temperatures that don't stay consistent
- The refrigerator or freezer running excessively hot or cold
- The compressor not turning on at all
Causes of failure can be worn over many years of use or damage to electronic components. Without an accurately functioning control, cooling performance diminishes significantly.
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
This was for a friend of mine his refrigerator stopped cooling Gary G. • Ofallon , MO • July 12, 2015
This was a 2000 model so rather than just replace the defrost timer which was visibly burnt on the terminals, we just did everything. The cold control, defrost timer, thermostat, defrost heater and the compressor capacitor were all replaced. I had the same issue on my older unit and tore it apart replacing one item at a time over a three month period so on an older one i suggest do it all while it is apart.
Read more
More
$63.48
- Compare At:
-
$81.45
- You Save:
-
$17.97
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304515677
The Screw Kit is an OEM part for Frigidaire appliances. It contains various screws specifically designed to fit and secure different components of Frigidaire appliances, ensuring a tight and secure assembly. This kit is essential for both initial installations and for making repairs or replacements to existing appliances, providing the necessary hardware to maintain or restore the structural integrity of your appliance. These screws are #10-16 x .500 inches long and can be loosened or tightened using either a Phillips-head or square-head screwdriver.
Symptoms of needing a new Screw Kit include:
- Loose components or panels on your appliance due to missing or damaged screws.
- Inability to securely fasten parts during assembly or repairs, which can lead to operational issues or safety hazards.
- Screws stripping or corroding over time, which can compromise the stability and durability of the appliance.
Causes for replacing screws can include mechanical stress that causes screws to loosen or fall out, environmental factors like moisture leading to corrosion, or accidental damage during cleaning or maintenance.
This screw kit is designed to be universally compatible with various Frigidaire models, ensuring that you have the right screws for a range of repair needs.
Do-It-Yourself Stories from Customers like You
Broken handle on refrigerator door Margaret J. • North Olmsted , OH • January 29, 2016
I ordered a replacement handle and screws. The process was very easy with the help of one of your "pros" who found all the parts needed and took my order. I didn't realize I was getting both a refrigerator door handle and a freezer door handle in one set, but now we have the freezer handle if we need it. Removing the old handle and installing the replacement was very easy. It looks great, in fact the replacement is metal, whereas the original was plastic, so it looks better than it ever did!
Read more
More
$14.95
- Compare At:
-
$17.79
- You Save:
-
$2.84
Genuine Frigidaire part
By: Frigidaire
Part Number: 240521303
The Screw is an OEM part for Frigidaire appliances. This specific screw is designed for Frigidaire models, ensuring a secure fit and proper function in the appliance assembly. Screws like this one are critical for holding components together tightly, contributing to the overall stability and durability of the appliance. Whether used in refrigerators, ovens, washers, or dryers, this screw plays a pivotal role in assembly and maintenance tasks, ensuring parts remain securely fastened during operation.
Over time, screws can become loose, stripped, or lost during repairs or adjustments, potentially compromising the appliance's integrity and performance.
Symptoms of needing replacement screws include:
- Loose parts or panels on the appliance
- Difficulty in securing components during assembly or maintenance
- The need to replace lost or damaged screws during repair work
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken door handle and bar retainers Eric W. • Kansas City , MO • May 07, 2015
The bar retainers just snapped in and the door handle can be replaced with three screws. Took about 5 minutes total.
Read more
More
$20.45
- Compare At:
-
$24.13
- You Save:
-
$3.68
Genuine Frigidaire part
By: Frigidaire
Part Number: 240534801
The Freezer Door Shelf is an OEM part for Frigidaire side-by-side refrigerators. It provides adjustable storage within the freezer compartment for easy access to items. The shelf measures about 24 inches long and 5 inches wide.
Causes of a bad freezer door shelf can include wear over time from repeated loading/unloading that causes scratches or cracks in the lightweight plastic. Exposure to slushy spills may promote material breakdown if not cleaned promptly.
Symptoms of a bad freezer door shelf include:
- Sagging or inability to bear weight of frozen packages
- Breakage leaving smaller pieces that could fall
- Discoloration compromising appearance and sanitation
- Shelving that won't stay level or properly positioned
This genuine Frigidaire shelf is also compatible with Electrolux and Kenmore models.
Do-It-Yourself Stories from Customers like You
Missing parts for my fridge Joanne S. • Tullahoma , TN • February 05, 2022
I ordered three parts for my fridge. The entire process was so easy! I entered my model number and quickly found the parts I needed! Submitted the order and the parts arrived the Next Day! I was very happy!
Read more
More
$32.95
- Compare At:
-
$39.21
- You Save:
-
$6.26
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304507146
The Hinge Bearing is an OEM part for Frigidaire refrigerators. It plays a critical role in the smooth operation of the refrigerator door by providing a pivot point for the hinge. This small component helps to ensure that the door opens and closes smoothly and seals properly, which is essential for maintaining the refrigerator's internal temperature and energy efficiency.
Symptoms of a bad Hinge Bearing include:
- Difficulty in opening or closing the refrigerator door.
- Squeaking or grinding noises when the door moves.
- The door hanging unevenly or not sealing correctly, potentially leading to temperature fluctuations inside the fridge.
Causes of a bad hinge bearing can include wear and tear from the frequent use of the refrigerator door, accumulation of dirt or grime that impedes smooth movement, or degradation of the material over time due to environmental factors such as moisture.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Door hinge washer Sam M. • Boswell , OK • October 20, 2014
I put a piece of two-by-four, (2"x4") about 10-inches long on edge under the door to support the door. I removed the 3-bolts attaching the door hinge at the bottom corner. I then slid the washer onto the post and placed the bracket back in place with the 3-bolts.
That did the trick.
I used a 3/8-inch socket with extension and a ratchet.
Read more
More
$6.59
- Compare At:
-
$7.25
- You Save:
-
$0.66
Genuine Frigidaire part
By: Frigidaire
Part Number: 240311303
The Door Hinge Washer is an OEM part for Frigidaire refrigerators. The washer acts as a protective barrier that reduces friction and wear on the hinge and frame, facilitating a quieter operation and extending the lifespan of the door mechanism.
Over time, hinge washers can become worn or damaged due to the constant opening and closing of the refrigerator door.
Symptoms of a bad Door Hinge Washer include:
- The refrigerator door is difficult to open or close
- Squeaking or grinding noises when the door is moved
- Looseness or sagging of the door, indicating misalignment
- Excessive wear on the hinge or the area of the frame where the hinge is attached
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Frig door hinge worn letting door drag on bottom Jerry P. • Shawnee , KS • January 21, 2017
My 10 year old frig door was hanging down to the point it wasnt fully closing and sealing unless you picked up on it. I ordered a lower hinge bracket, upper and lower bearing, and spacer. My bracket was bent down a little due to my kids hanging on the door when looking at the bottom shelf and i discovered my bracket was held on by only two bolts when there was supposed to be three. I ordered a bolt too. I was able to remove the bottom hinge, remove door to replace upper and lower bearing and...
Read more
More
$14.33
- Compare At:
-
$17.05
- You Save:
-
$2.72
Genuine Frigidaire part
By: Frigidaire
Part Number: 218396700
The Handle Mounting Block is an OEM part for Frigidaire refrigerators. This component anchors the refrigerator door handle assembly while also reinforcing the door structure.
Causes of a bad mounting block can include cracks developing from repeated opening/closing stresses, broken fasteners loosening its installation, or residual damage during door replacement or repair attempts.
Symptoms of a bad handle mounting block include:
- Loose, sagging or misaligned door handles
- Doors difficult to open or not staying securely closed/latched
- Noisy rattling coming from the door handle area
- Cracks or breaks visible in the mounting plastic
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken handle Jack M. • Memphis , TN • November 04, 2018
No problem, 1 min to fix
Read more
More
$44.95
- Compare At:
-
$53.49
- You Save:
-
$8.54
Genuine Frigidaire part
By: Frigidaire
Part Number: 215503203
Specs: 10-16 X 0.500
Do-It-Yourself Stories from Customers like You
Broken handle Jack M. • Memphis , TN • November 04, 2018
No problem, 1 min to fix
Read more
More
$6.59
- Compare At:
-
$7.25
- You Save:
-
$0.66
Genuine Frigidaire part
By: Frigidaire
Part Number: 240314011
The Lower Hinge Bracket is an OEM part for Frigidaire refrigerators. This bracket supports the refrigerator door, allowing it to pivot smoothly while opening and closing. It ensures that the door remains aligned and operates correctly.
You should replace the lower hinge bracket if it becomes damaged or worn out. Common causes of a bad hinge bracket include wear and tear from frequent use, rust or corrosion, or damage from accidental impacts.
Symptoms of a bad lower hinge bracket include:
- Difficulty in opening or closing the refrigerator door
- The door not aligning properly with the refrigerator body
- Unusual noises when the door is in motion
- Visible damage or rust on the bracket
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Frig door hinge worn letting door drag on bottom Jerry P. • Shawnee , KS • January 21, 2017
My 10 year old frig door was hanging down to the point it wasnt fully closing and sealing unless you picked up on it. I ordered a lower hinge bracket, upper and lower bearing, and spacer. My bracket was bent down a little due to my kids hanging on the door when looking at the bottom shelf and i discovered my bracket was held on by only two bolts when there was supposed to be three. I ordered a bolt too. I was able to remove the bottom hinge, remove door to replace upper and lower bearing and...
Read more
More
$58.95
- Compare At:
-
$70.15
- You Save:
-
$11.20
Genuine Frigidaire part
By: Frigidaire
Part Number: 215005101
This replacement screw secures panels, brackets, and other components in your appliance. Replace missing or stripped hardware to restore a tight, rattle-free fit and keep assemblies aligned the way the manufacturer intended.
- Fastens the designated component to the appliance cabinet or assembly
- Helps reduce looseness, vibration, and rattling
- Replaces missing, corroded, or stripped screws
- Supports proper alignment of panels, trim, and brackets
What's included: One screw Install notes:
- Disconnect power and, if applicable, shut off gas/water before servicing
- Match the screw to the original location; retain any reusable clips or washers
- Start threads by hand to avoid cross-threading; use the correct driver
- Tighten snugly—do not overtighten into plastic or thin metal
Do-It-Yourself Stories from Customers like You
Deli/meat pan installment Kevin G. • Fort Lauderdale , FL • March 02, 2016
I had purchased a model refrigerator that did not come with the deli/meat pan, and I was told by the manufacturer's customer service department that my purchased model was not designed with the item.
I made comparisons with other models that had the deli/meat pan and found that the shelving alignments were the same so I decided to improvise and install the deli/meat pan.
The manufacturer's customer service department did assist me with obtaining the appropriate part numbers and I placed the...
Read more
More
$21.95
- Compare At:
-
$26.34
- You Save:
-
$4.39
Genuine Frigidaire part
By: Frigidaire
Part Number: 240313703
The Upper Hinge is an OEM part for Frigidaire refrigerators. It is responsible for securing the top of the refrigerator door to the cabinet, allowing the door to open and close smoothly and securely. This hinge ensures proper alignment and functionality of the refrigerator door.
Causes of a bad upper hinge can include wear and tear over time, damage from excessive force or impact, or corrosion due to moisture exposure. A faulty upper hinge can lead to issues with door alignment and sealing.
Symptoms of a bad upper hinge include:
- The refrigerator door not closing properly
- A sagging or misaligned door
- Unusual noises when opening or closing the door
- Gaps in the door seal leading to temperature inconsistencies
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The frif door hinge went missing when I was moving into house due the removing the frig and freezer doors to fit it through the new house door Ian H. • Phenix City , AL • February 03, 2019
I ordered online to AppliancePartPros.com for the fridge door hinge and after quick delivery I spent 15 minutes to securely fit the door back on the frig.
I'm sure to do business again for parts if needed.
Read more
More
$37.95
- Compare At:
-
$44.78
- You Save:
-
$6.83
Genuine Frigidaire part
By: Frigidaire
Part Number: 240516502
The Lower Hinge Pin is an OEM replacement part for Frigidaire refrigerators. It serves as a pivot point to properly hang the refrigerator doors in place. This hinge pin supports the stable mounting of doors while allowing for smooth opening and closing.
Causes of a bad lower hinge pin can include wear from extended use, damage due to excess weight loads, or corrosion interfering with motion.
Symptoms of a bad lower hinge pin include:
- Doors not sitting securely when closed or hanging loosely
- Difficulty smoothly opening or closing the refrigerator door
- Noises or squeaking emanating from door hinge areas
- Gaps appearing around door seals
This Frigidaire refrigerator part is compatible with models by Electrolux, Gibson, Kelvinator, and some Kenmore.
Do-It-Yourself Stories from Customers like You
Refrigerator door was sagging Joel W. • Greenville , SC • September 07, 2015
I ordered a refrigerator door hinge, hinge pin, and washer. The descriptions and pictures imply that these items are sold separately. However, the hinge I received was an assembly that included a pin and washer.
I replaced the original hinge assembly with the new assembly, but the door still sagged (not as badly as before). I added the washer I had ordered separately and the original washer (total of 3 washers). The refrigerator doors seems to be closing properly now. I still have an extra...
Read more
More
$55.66
- Compare At:
-
$65.68
- You Save:
-
$10.02
Genuine Frigidaire part
By: Frigidaire
Part Number: 218252201
The Screw is an OEM replacement part for Frigidaire refrigerators. This small but essential component is used to secure various parts of the appliance, such as panels, brackets, or internal fixtures, ensuring the refrigerator's structural integrity and proper operation.
Over time, screws may become loose, stripped, or corroded due to regular use, environmental factors, or maintenance work. A damaged or missing screw can lead to misaligned parts or reduced stability of the appliance.
Symptoms of a bad or missing screw include:
- Loose or wobbly components within the refrigerator
- Panels or fixtures coming apart or misaligned
- Difficulty securing parts during maintenance or repair
- Rattling or unusual noises during operation
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Door racks/door stop broken. Jennifer S. • Lincoln , NE • December 13, 2020
I wasn’t sure where I could get parts for the fridge, Google brought me here. Super easy to look up model #’s and locate parts by type/location with the appliance map. I needed to change the racks and the doorstop. The racks were super simple. I would have succeeded with the doorstop too, but the holes at the bottom are stripped and the doorstop wasn’t secured correctly in the first place. So that’s frustrating, but appliance parts pros were easy to use, parts came quickly and The video from...
Read more
More
$11.45
- Compare At:
-
$12.84
- You Save:
-
$1.39
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303305677
Includes service line.
Do-It-Yourself Stories from Customers like You
Freezer would not go below 32°f. James L. • Port Saint Lucie , FL • February 23, 2018
Had a friend who is an appliance repair tech. Replace the evaporator, the heater coil, and the filter/drier. Parts were soldered together and the compressor was put under vacuum. Then, charged with 5 oz. of refrigerant. The freezer works great now!
Read more
More
$22.95
- Compare At:
-
$27.31
- You Save:
-
$4.36