Kenmore Refrigerator 363.9517985 (3639517985, 363 9517985) Parts
Genuine Ge part
By: Ge
Part Number: WR62X26536
Ice dispenser stuck on crushed or not dispensing? This armature kit connects the solenoid to the chute door. Moderate DIY repair with video guide.
Do-It-Yourself Stories from Customers like You
Water was overflowing out of the ice maker during fill process and freezing into a block of ice! Steven B. • Arlington , TX • March 17, 2015
Replaced the water supply valve...boom!
Read more
More
$52.73
- Compare At:
-
$63.28
- You Save:
-
$10.55
Genuine Ge part
By: Ge
Part Number: WR23X10300
Supplies electrical power from wall outlet to refrigerator. Replace this cord if cut, frayed, overheated, or damaged to restore safe electrical connection.
Do-It-Yourself Stories from Customers like You
Power cord needed to be replaced Jorge V. • Tucson , AZ • November 14, 2015
Spliced new and old power cord near the connections in the fridge and connected them. Didn't mess with the factory harnesses or connections inside actual fridge.
Read more
More
$22.35
- Compare At:
-
$26.82
- You Save:
-
$4.47
Genuine Ge part
By: Ge
Part Number: WR01X10618
Mounting screw fastens panels, brackets, and trim in refrigerators, dishwashers, and ranges. Replace missing, stripped, or rusty screws to secure parts.
Do-It-Yourself Stories from Customers like You
Ice dispenser wouldn't dispense ice Chris K. • Felton , DE • April 29, 2025
The auger gearbox shaft had a spot that was stripped of threads which prevented the auger drive from spinning the ice down the chute. I replaced the auger motor/gearbox assembly, the auger drive as it had to be cut off the shaft, and the 3 mount bolts that hold it all in place. Whole job took 30 minutes from start to finish which included cutting off the drive bracket.
Read more
More
$7.37
- Compare At:
-
$8.36
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WR17X1483
Replacement 5/16-inch water tubing that connects the inlet valve to the icemaker. Replace when the original line becomes brittle, cracked, or kinked.
Do-It-Yourself Stories from Customers like You
Water dispenser line was crushed and leaking from the weight of the compressor/motor setting on top of it warranty repairman caused the problem when he replaced the compressor/motor assembly Joe L. • Cornelius , NC • January 19, 2019
Had to cut the old line at the water storage tank and attach the new one using the connector fitting from the kit. The new line was run on the outside of the refrigerator to reach the solenoid valve on the opposite side. The is no route within the refrig other than under the compressor/motor. Not the best situation but I secured the line with cable clamps.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR1X1367D
E-style retainer ring secures ice maker auger components. Replace when worn or damaged to restore ice dispensing. Confirm fit with your model number.
Do-It-Yourself Stories from Customers like You
A fin on the plastic auger broke off and needed to be replaced John M. • Massanutten , VA • August 08, 2015
I ordered a replacement auger from AppliancePartsPros.com. Upon receipt of the new auger, I watched the repair video and took the ice crusher apart. I found several other parts that needed to be replaced as well. Once All the parts were received, I again watched the video. The video was not specific enough to show how to reassemble the ice crusher blades and the two types of washers. I found another video on YouTube that walked me through specific details of assembly and everything went...
Read more
More
$12.95
- Compare At:
-
$15.41
- You Save:
-
$2.46
Genuine Ge part
By: Ge
Part Number: WR1X5278
Secures refrigerator wiring to prevent chafing and vibration noise. Replace when damaged or missing to keep harnesses organized. Confirm fit by model.
More
$7.37
- Compare At:
-
$8.36
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WR2X7309
Mounting bracket that secures the ice dispenser solenoid in place. Replace if cracked, broken, or missing to restore proper solenoid alignment and function.
Do-It-Yourself Stories from Customers like You
Ice dispenser crushing ice only no cubes Eric W. • Copper Canyon , TX • June 27, 2014
Easy fix once I found the problem. Broken solenoid sleeve. Part cost $2.58 + shipping. 10 minute repair.
Read more
More
$6.72
- Compare At:
-
$8.36
- You Save:
-
$1.64
Genuine Ge part
By: Ge
Part Number: WZ4X241D
Set of 12 size 8-18 mounting screws for dishwashers. Replaces lost, stripped, or missing screws for secure installation of handles and components.
Do-It-Yourself Stories from Customers like You
We didn't have a power cord for our dryer Heather B. • Dulce , NM • October 27, 2018
Ordered the cord through appliance parts pros, with additional screws and it works! Yay after waiting months and everywhere was out. Thank you.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR2X7905
Seals the ice bucket to prevent spills, frost buildup, and water pooling. Replace when ice shifts or water collects. Confirm fit with your model.
Do-It-Yourself Stories from Customers like You
The augor in the ice maker was rusty Angie K. • Greenwich , CT • November 15, 2015
Changed the part with SS part.
Read more
More
$10.07
- Compare At:
-
$11.84
- You Save:
-
$1.77
Genuine Ge part
By: Ge
Part Number: WR2X4138
Mounting spacer maintains proper clearance between refrigerator panels, doors, or components. Replace if cracked, broken, or missing to restore fit.
More
$14.95
- Compare At:
-
$17.94
- You Save:
-
$2.99
Genuine Ge part
By: Ge
Part Number: WR01X10623
Replacement 8-18 x 9/16 machine screw for securing panels, brackets, and internal components. Needed when fasteners are stripped, missing, or worn.
Do-It-Yourself Stories from Customers like You
Bottom kick plate was missing. Robert G. • Apopka , FL • February 28, 2021
REPLACED IT WITH A NEW ONE.
Read more
More
$7.95
- Compare At:
-
$9.54
- You Save:
-
$1.59
Genuine Ge part
By: Ge
Part Number: WR02X11295
Drives the auger to push ice from bin to chute. Replace if ice won't dispense or motor jams. Verify fit with your model number before ordering.
Do-It-Yourself Stories from Customers like You
No ice would come out dispenser Donovan L. • Atlanta , GA • July 04, 2015
The auger motor failed and wouldn't turn. I replaced the motor and it works without a problem. Make sure you dont throw away the motor boot or buy one if you don't have one. Otherwise, the temperature will freeze up the motor and lead to premature failure.
Read more
More
$22.72
- Compare At:
-
$27.04
- You Save:
-
$4.32
Genuine Ge part
By: Ge
Part Number: WR2X4143
Replacement pivot that supports and aligns refrigerator doors or drawers. Needed when original pivot is cracked, broken, or worn, causing misalignment.
Do-It-Yourself Stories from Customers like You
The ice maker did not crush ice Joy U. • Galveston , TX • October 02, 2016
When we inspected the first time we found that
Plactic had broken from the spiral part that for wards the ice. Also there were cracks in two places of other parts. There was a hole in the bottom of the bin. The new spiral was assembled and two new parts were replaced with help from the video and the diagram and the unit worked well. Two months later, ice maker would not forward any ice though the bin was full. We emptied the bin sand have ordered a new part or two in hopes that they will...
Read more
More
$7.37
- Compare At:
-
$8.36
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WR17X1361
Ice not dispensing or jamming? This ice dispenser auger blade moves ice from the bin to the chute. Installs in numbered sequence with spacers.
More
$10.95
- Compare At:
-
$13.03
- You Save:
-
$2.08
Genuine Ge part
By: Ge
Part Number: WR17X2061
Replaces the outer housing that supports your refrigerator's ice crusher and dispenser chute. Order a new housing if yours is cracked or broken.
Do-It-Yourself Stories from Customers like You
Ice storage bin had problem dispensing James W. • Haltom City , TX • November 28, 2016
Replaced auger, crusher housing and end nut
Read more
More
$37.95
- Compare At:
-
$44.78
- You Save:
-
$6.83
Genuine Ge part
By: Ge
Part Number: WR2X4140
Supports and centers the ice crusher blade assembly in your refrigerator. Replace if cracked, worn, or missing to prevent blade wobble and noise.
Do-It-Yourself Stories from Customers like You
Auger broken front bushing worn out on ice crusher Troy R. • Salem , OR • October 14, 2015
I welded the auger first but it didnt seem to last. i then took the whole thing apart and found more worn parts so i ordered all of the parts i needed and replaced them. it now works like new.
Read more
More
$10.34
- Compare At:
-
$11.70
- You Save:
-
$1.36