Kenmore Refrigerator 363.9557724 (3639557724, 363 9557724) Parts
Genuine Ge part
By: Ge
Part Number: WR2X8663
The Ice Door Spring is an OEM part compatible with GE refrigerators. It is responsible for providing tension and support to the ice chute door, allowing it to open and close smoothly. When you activate the ice dispenser, the spring helps to release the door and allow the ice to pass through. After dispensing, the spring assists in closing the door to prevent cold air leakage and maintain the desired temperature inside the refrigerator.
You should replace the ice door spring if it loses tension or breaks, which can happen due to regular wear and tear, frequent use, or accidental damage. A faulty spring can lead to issues with the ice dispenser's operation and overall efficiency.
Symptoms of a bad ice door spring may include:
- Difficulty in opening or closing the ice chute door
- Ice dispensing issues, such as the door not opening when the dispenser is activated
- Cold air leakage from the ice chute area
- Ice buildup on the front of the icemaker
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Ice dispenser door not closing tightly; frost build up in ice chute; mold growing behind ice and water mechanism Terrance A. • Arleta , CA • March 21, 2017
The ice dispenser door was not closing tightly. As a result, there was frost build up in the ice chute, which also was allowing ambient air and temperature into the freezer compartment. Upon further inspection, there was black “schmutz” on the ice door, and the rubber ice funnel and deflector parts were deteriorating. Because the door was not closing tightly, I also assumed that the door-closing spring was week. The parts I ordered were: ice door assembly, ice funnel, ice deflector, spring and...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR2X7213
Do-It-Yourself Stories from Customers like You
The riser cam wore out and failed causing door misalignment Ed B. • San Bruno , CA • November 30, 2016
I emptied door shelves and used plastic sheet to close off refrigerator. The repair was done with refrigerator running. I removed door and changed riser cam and shim. Then replaced door. It took maybe 45 minutes from start to finish. If I did the job again it would be completed in 30 minutes or less. The videos are informative.
Thank You
Read more
More
Genuine Ge part
By: Ge
Part Number: WZ4X244D
Do-It-Yourself Stories from Customers like You
Broken drawers Sarah P. • Bronx , NY • January 10, 2016
I removed the drawers and old rails, and screwed in the new ones. It was very straightforward.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X10275
Do-It-Yourself Stories from Customers like You
Ice maker door broke Peter L. • Virginia Beach , VA • June 29, 2015
I tried to glue the broken piece back on but had no luck. You had a friendly web site, I found the correct replacement part quickly.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X3095
Color: Black.
Do-It-Yourself Stories from Customers like You
Ice dispenser door not closing tightly; frost build up in ice chute; mold growing behind ice and water mechanism Terrance A. • Arleta , CA • March 21, 2017
The ice dispenser door was not closing tightly. As a result, there was frost build up in the ice chute, which also was allowing ambient air and temperature into the freezer compartment. Upon further inspection, there was black “schmutz” on the ice door, and the rubber ice funnel and deflector parts were deteriorating. Because the door was not closing tightly, I also assumed that the door-closing spring was week. The parts I ordered were: ice door assembly, ice funnel, ice deflector, spring and...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR1X1714
Do-It-Yourself Stories from Customers like You
Fan motor locked up !!!!! Thomas F. • Canton , GA • March 11, 2020
Ok so my mom called GE and a service man came out. He said no good. The refrigerator was to old to be fixed. You will have to buy a new one .. ok so with that said he collected his $100 dollars service fee !!! I slid the refer out and started tinkering with it. I went on line and hit your web page saw schematic map and ordered fan motor because the one on refer wouldn’t turn !!!! You guys delivered it on a Sunday ( perfect) I put it in carefully and bam it worked. I was in shock that it was...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR13X745
Do-It-Yourself Stories from Customers like You
Door out of alignment Deidra C. • Clinton , CT • May 26, 2017
Purchased a bracket and cam. Did not need the cam but replaced the bracket doors were too tight so added a washer to each screw. Easy project.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR72X252
This left-hand drawer slide assembly mounts inside the refrigerator's fresh food section. It supports the shelf/cover and guides the drawer on its track, restoring smooth operation and proper alignment when the original rail is cracked or worn.
- Mounts on the left wall to support the shelf/cover and provide a smooth sliding track for the drawer
- Keeps the drawer aligned and level for easy in-and-out movement
- Replace when the existing rail is cracked, warped, or missing tabs
- Typical symptoms: drawer hard to open/close, pops off track, shelf tilts or sags, visible damage to the rail
What's included: One left-side slide assembly Install notes:
- Disconnect power and clear the compartment before starting
- Remove the affected drawer and its shelf/cover to access the slide
- Release locking tabs or remove mounting screws; transfer any reusable hardware to the new slide
- Test drawer travel before reloading
Do-It-Yourself Stories from Customers like You
My ice maker bin smelled like freezer burn and ice tasted like it too Nancy R. • New Paltz , NY • November 18, 2014
I bought whole new ice bin and it it's now the ice is great.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR72X210
This replacement part is a snack pan slide rail, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. This part is able to hold up other trays and racks in the refrigerator and freezer so that extra shelf space can be utilized. These slide rails can also hold up trays that can support heavy bottles and drinks. A new snack pan slide rail might be needed if the current ones have become stripped and are unable to latch onto the shelving to support it. It is common that these parts can become brittle over time as exposure to low temperature wears down the plastic. Be sure the shelving of the appliance is clear before attempting to replace the slide rail. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of appliances made by General Electric.
Do-It-Yourself Stories from Customers like You
Shelf in refrigerator needed to be replaced Daniel S. • Jacksonville , NC • September 29, 2018
Ordered parts from appliance parts pros and completed installation myself
Read more
More
Genuine Ge part
By: Ge
Part Number: WR13X21523
Do-It-Yourself Stories from Customers like You
Broken hinge to the refrigerator door. Evans R. • Oak Lawn , IL • February 14, 2021
Ordered thru appliancpartspros, replaced broken part to the door.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X4341
Do-It-Yourself Stories from Customers like You
First thing i saw was that the ice cubes were coming out with rust although we need iron i prefer a pill Mike E. • El Paso , TX • July 22, 2015
I took the ice bucket out and saw the Plate and the Auger were rusted out I thought about cleaning it but I figured that the rust prevent coating was probability all gone I've had this refrigerator since 98 , so I figured the best way was to buy the replacement parts . the price was pretty good so I went that route , the taking apart was very easy , its the putting back together that takes time , however I took a video of the bucket before I took it apart and the on-line video that...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR29X5153
Genuine Ge part
By: Ge
Part Number: WR72X253
Do-It-Yourself Stories from Customers like You
Slide assembly left and right both were broken. Robert L. • Daytona Beach , FL • November 12, 2017
Ordered the parts and in a couple of days they arrived. A simple Philips screw driver was all that was needed to complete the install. Very simple, not complicated. You don't need to order the slide bushings as the slide assy. has them installed from the factory.
Appliance Parts Pros is the best!!!
terry,florida
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X3909
Lower fresh food section.
Do-It-Yourself Stories from Customers like You
Plastic shield light was warped from heat of light bulbs and would no longer stay in place on rear wall of refrigerator Paul S. • Green Valley , AZ • February 28, 2015
I needed to find a parts supplier who could provide a replacement part at a reasonable price. I first tried the manufacturer, General Electric, but they only showed freezer replacement parts for the model of my side-by-side refrigerator. In looking over a list of parts available for this model there seemed to be a possible part that sounded like a match but there was no picture to confirm that this was the correct replacement part. When i clicked the Appliance Parts Pros web site They had a...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR2X7238
Do-It-Yourself Stories from Customers like You
Starting to hear strange noises from under and back of the refrigerator suspected it was probably the fan motor Billy S. • Granite City , IL • January 28, 2020
Did some research on Appliance Parts Pros site. Took a chance and ordered the parts I thought were needed. They came in three days. Suspicions confirmed. Relatively easy fix. All went well. Repair videos were especially helpful. Appreciate ease of repair and help from App Parts. Thanks
Read more
More
Genuine Ge part
By: Ge
Part Number: WR2X8933
Do-It-Yourself Stories from Customers like You
Clogged drain tube Keith P. • Ivoryton , CT • March 03, 2017
Swapped it out for new tube. Take 5 minutes and zero effort. The drain tube will clog with mold. You can clean it out but the tube will clog again despite's you best efforts as the tube wall provide a great habitat. Ordered new tubes to facilitate swap-outs. Old tubes can be cleaned but will recolonize quickly.
Read more
More