Kenmore Range 363.9584590 (3639584590, 363 9584590) Parts
Genuine Ge part
By: Ge
Part Number: PM10X310
Specially formulated cleaner for ceramic glass and smooth cooktops. Removes cooked-on food, grease, and spills without scratching. Verify fit by model.
Do-It-Yourself Stories from Customers like You
Cooktop on my kitchenaid slide in range shattered word to wise don't place your pot tops face don on the stove the top formed a vacuum with the top and as the top cooled the vacuum increased to th Marc L. • North Branford , CT • May 16, 2016
VERY simple fix- you do not even have to pull the range out.. I ordered a new cooktop from Appliance parts Pros. The customer sales rep Alphonso was great and walked me through the general process. I could find no explicit instructions for the repair but I muddled my way through. The fix is simple on Kitchenaid/Whirpool slide in ranges. 1. Open the oven door and remove the two phillips head screws directly below the control panel that hold the panel down.2. Lift the control panel upward and...
Read more
More
$14.78
- Compare At:
-
$17.44
- You Save:
-
$2.66
Genuine Ge part
By: Ge
Part Number: WB44K5012
Oven won't heat or bakes unevenly? A failed bake element is often the cause. Located at the bottom of the oven, this part is a straightforward DIY fix.
This part fixes the following symptoms
-
Little to no heat when baking
-
Oven not heating evenly
-
Oven is too hot
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Element burn into Richard D. • Summerville , GA • April 02, 2014
Took out old element,got part number and look for the cheapest price online, Appliance Parts Pro could not be beat... order part be number, easy to match, came in fast and put in element, only needed a 5/16 nutdriver to take it out and put it in,unpluged wires and bent just a little to keep one on left and one right from getting mixed up and pluged up new element and ran in the 2 screws,easy job, dont get no easier.. Thanks again Appliance Parts Pro
Read more
More
$47.41
- Compare At:
-
$62.33
- You Save:
-
$14.92
Genuine Ge part
By: Ge
Part Number: WB21X5301
Fix oven not reaching set temperature or F2/F3 error codes. This temperature sensor monitors internal heat for accurate cooking. Easy DIY repair.
This part fixes the following symptoms
-
Oven is too hot
-
Won't start
-
Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You
Wasn't commng up to temperture put it at 350 would only get up to 250 Michael U. • Dix Hills , NY • April 21, 2014
Spoke to a parts pro and told them of the problem. there were 2 possibilieies from the explanation of what the parts do. onw could have been the Range oven igniter. that wasn't it beaacause the over was lighting fine. by process of illimination it was the Oven Sensor Assembly.
Read more
More
$147.54
- Compare At:
-
$179.02
- You Save:
-
$31.48
Genuine Ge part
By: Ge
Part Number: WB2X9719
The Support Bracket is an OEM part for GE ovens, designed to provide stability and support for the broiling element. This bracket is essential for ensuring the broiling element is securely positioned at the top of the oven, allowing for even heat distribution and optimal cooking performance when broiling foods.
Causes of damage to the support bracket often involve high heat exposure, accidental impacts during cleaning or cooking, or general wear and tear over time.
Symptoms of a bad Support Bracket include:
- The broiling element hanging lower than usual or touching the oven cavity, which can affect cooking performance and potentially damage the oven's interior.
- Unstable or loose broiling element, leading to uneven cooking or broiling.
- Visible signs of wear, damage, or corrosion on the bracket itself, indicating it may no longer provide adequate support.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Lower oven bake heating element was broken in half Richard P. • Colleyville , TX • September 19, 2014
Watched the appliancepartspro video and changed it out. It took about 15 minutes. I'm sure I saved hundreds.
Read more
More
$8.69
- Compare At:
-
$10.43
- You Save:
-
$1.74
Genuine Ge part
By: Ge
Part Number: 40A15
The Light Bulb (40W) is an OEM component for GE refrigerators. As an essential task lamp, it illuminates the interior of the refrigerator and freezer compartments.
All light bulbs will eventually burn out with consistent use over many years. Vibration during compressor cycles can also potentially disrupt bulb filaments faster.
Symptoms of a burnt out refrigerator light bulb include:
- Dim or no light illuminating inside refrigerator shelves
- Shadows and dark spots making it difficult to find items
- Higher utility costs from leaving the door open to see inside
This bulb is also compatible with refrigerators from brands like Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Nothing worked except the light :) Przemyslaw B. • Wallington , NJ • September 20, 2014
I changed the motherboard - computer and also changed the motor in the freezer, because it was doing a howling sound every time it turned on. The repair technician asked for $500 for a repair and that is on top of the $230 I paid him two days before. I looked up the parts and decided to try myself and it paid off. Great instructional videos. Thanks
Read more
More
$20.38
- Compare At:
-
$24.46
- You Save:
-
$4.08
Genuine Ge part
By: Ge
Part Number: WB44X232
Broil element broken or not heating? This top heating element restores high-heat broiling in electric ovens. DIY-friendly repair, typically done in under 30 minutes.
This part fixes the following symptoms
-
Little to no heat when broiling
See more...
Do-It-Yourself Stories from Customers like You
Oven broil element was broken in half after self cleaning cycle Charles R. • Charlotte , NC • January 24, 2015
I needed to replace the oven broil element on my 15 year old GE range/oven unit. The broil element was broken in half during an oven self-cleaning cycle. Due to the age of the oven, I decided to replace both the broil and bake elements. I ordered the elements from Appliance Parts Pro. Their web site made it very easy to identify and locate the correct replacement parts. The parts arrived in 2 days. I watched the repair demo videos available for each element. Although the oven used in the demo...
Read more
More
$72.95
- Compare At:
-
$87.54
- You Save:
-
$14.59
Genuine Ge part
By: Ge
Part Number: WB1X1293
Secures the igniter to the burner assembly in gas ranges and ovens. Replace if stripped, missing, or damaged during igniter replacement or repair.
Do-It-Yourself Stories from Customers like You
Failure to hold temperature after preheating. Michael D. • Wilmington , DE • January 07, 2023
I was getting really frustrated with our oven. It would preheat to the correct temperature, then slowly lose heat until it was down to about 200 degrees. So it took about two hours to heat a pizza!
Finally decided to repair the oven myself, rather than pay $300.00 to have a repair person come out. Ordered the replacement igniter from AppliancePartsPros.com, and it arrived in two days.
I followed the instructional video on the AppliancePartsPros.com website, and it was going well until I...
Read more
More
$11.34
- Compare At:
-
$13.38
- You Save:
-
$2.04
Genuine Ge part
By: Ge
Part Number: WB14X104
Replaces a cracked, worn, or broken oven door hinge. Installs on the right side, allowing the door to open and close smoothly and securely.
Do-It-Yourself Stories from Customers like You
The left oven door hinge was siezing door would not open fully Tom J. • Powder Springs , GA • November 19, 2014
I ordered both hinges (if the nylon roller was bad on the left, it was probably going to go bad on the right side as well). The web site was easy to navigate, order process simple. Hinges arrived quickly. Slide the oven door up and off. unscrew the three screws for the hinge. You need to then pull up with some force (there is a big spring in there), and twist the hinge to get the last bit out. I used a hemostat to hold the spring and keep it from falling back into the hole. removed the...
Read more
More
$56.95
- Compare At:
-
$67.77
- You Save:
-
$10.82
Genuine Ge part
By: Ge
Part Number: WB48X10056
Broiler pan for ranges and ovens. Installs in main oven cavity to hold food under broiler element. Replace if cracked, warped, or heavily stained.
Do-It-Yourself Stories from Customers like You
None Ralph W. • Brentwoo , NY • July 13, 2014
Fast delivery, great service
Read more
More
$42.95
- Compare At:
-
$51.11
- You Save:
-
$8.16
Genuine Ge part
By: Ge
Part Number: WB14X103
Left side oven door hinge provides smooth opening and closing operation. Replace if cracked, seized, worn, or binding. Mounts to oven cavity interior.
Do-It-Yourself Stories from Customers like You
The left oven door hinge was siezing door would not open fully Tom J. • Powder Springs , GA • November 19, 2014
I ordered both hinges (if the nylon roller was bad on the left, it was probably going to go bad on the right side as well). The web site was easy to navigate, order process simple. Hinges arrived quickly. Slide the oven door up and off. unscrew the three screws for the hinge. You need to then pull up with some force (there is a big spring in there), and twist the hinge to get the last bit out. I used a hemostat to hold the spring and keep it from falling back into the hole. removed the...
Read more
More
$50.26
- Compare At:
-
$59.31
- You Save:
-
$9.05
Genuine Ge part
By: Ge
Part Number: WB23M24
6" element switch
Do-It-Yourself Stories from Customers like You
The burner would not stay at the temperature you wanted. It would go to high eventually. Ronald S. • Columbia , SC • February 05, 2022
Talked to a representative at your company they said it was probably the infinite switch.
I purchased all four switches, replaced all four burner switches. Very easy to do. In less than an hour to replace all four.
Read more
More
$106.95
- Compare At:
-
$128.34
- You Save:
-
$21.39
Genuine Ge part
By: Ge
Part Number: WB1M1
ST10-16 X 7/16"
Do-It-Yourself Stories from Customers like You
Bottom heating element not working on a ge electric range David K. • Portsmouth , RI • December 21, 2014
Move stove to unplug, remove rear center panel, indentify the two spade connectors that feed the heating element and remove (unplug) them. Remove two screws that hold the element to the inside rear wall of the stove and remove element. Install new element, plug in the previously removed spade connectors, re-install rear center panel, plug range (power) in, move stove back into place and enjoy.
Read more
More
$7.65
- Compare At:
-
$9.10
- You Save:
-
$1.45
Genuine Ge part
By: Ge
Part Number: WB1X1130
Replacement screw for securing panels, brackets, and internal components. Needed when original hardware is stripped, missing, or damaged during repairs.
Do-It-Yourself Stories from Customers like You
Broken door hinge on a ge wall mount double oven Cheryl A. • Mckinney , TX • June 18, 2018
We replaced the broken door hinge.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB25T10042
Indicator light lens covers and diffuses the panel light on your range or oven. Replace when cracked, discolored, or missing to restore visibility.
Do-It-Yourself Stories from Customers like You
Indicator light stopped working Elizabeth C. • Olympia , WA • January 28, 2026
Super easy with your parts and directions
Read more
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51
Genuine Ge part
By: Ge
Part Number: WB1X536
This is a replacement screw that can be used with many different types of household appliances. Screws fasten various pieces of machines together. They can also help to reduce the amount of vibration in the machine. If a screw is missing or damaged, it could cause a machine to stop working properly, or to vibrate more than it should.The screws are made from metal and will typically last for a long time. However, the threads and other parts of the screw can wear down with use. The screws could also become lost when making other repairs to the appliance. Replacement of the screws is generally easy, but it will depend on where it is placed.This item can replace certain screws found in various models of ranges, ovens, dryers, and microwaves from General Electric, Hotpoint, Whirlpool, and Kenmore. This is a genuine OEM replacement part sourced from the manufacturer. It is sold individually. Owners may want to have several replacements on hand in case they need them.
Do-It-Yourself Stories from Customers like You
Broken front glass door Roni T. • Sayreville , NJ • February 12, 2019
I was very pleased to get the glass on time and it was a perfect match. The only thing I had trouble was to get the screws required to fix. The screws were not available, so spend too much time trying find equivalent screws in homedepot.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB17X5095
The Terminal Block is an OEM part for GE electric ranges. It serves as a critical junction point where the range's wiring connects to the heating elements, ensuring proper electrical flow and operation of the oven and cooktop. This component is essential for the safe and efficient functioning of your appliance.
Causes of a bad terminal block can include overheating due to electrical surges, corrosion from prolonged exposure to heat and moisture, or physical damage from improper installation or handling.
Symptoms of a bad terminal block include:
- The oven or burners not heating properly
- Visible signs of burn marks or corrosion on the block
- Electrical arcing or sparking
- Intermittent or no power to the heating elements
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Bad wire on terminal block of electric range caused the stove to quit working 3days before thanksgiving Stephen Y. • San Antonio , TX • November 25, 2016
Replaced the power cord, bur terminal block fell apart. Ordered replacement part, and overnight shipping. Received the next day and completed repairs. Cheered up my wife, for sure.
Read more
More
$77.57
- Compare At:
-
$92.31
- You Save:
-
$14.74