Kenmore Dishwasher 665.13255K110 (66513255K110, 665 13255K110) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP717273
The Rubber Washer is an OEM part for Whirlpool dishwashers. This washer plays a role in ensuring a leak-proof seal at various connection points within the dishwasher, such as at the water inlet valve or hose connections. Its primary function is to prevent water from leaking out of the dishwasher during operation, thereby ensuring efficient and safe use of the appliance.
Over time, rubber washers can deteriorate due to the constant exposure to water and chemicals found in dishwasher detergents.
Symptoms of a bad Rubber Washer in a dishwasher include:
- Visible signs of wear or damage to the washer, such as cracks, brittleness, or deformation.
- Water leaking from the dishwasher, particularly around areas where hoses and valves connect.
- A decrease in dishwasher performance due to water not being contained properly during cycles.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
This part fixes the following symptoms
-
Not drying dishes properly
See more...
Do-It-Yourself Stories from Customers like You
Dishwasher not heating. Ben M. • Sacramento , CA • February 18, 2020
Replaced heater element: Once I had the dishwasher out of the cabinet with supply hose, drain hose and electric disconnected, removing the heater element was fast and easy. However, it was confusing that the new heater element had rubber washers on it already, something not mentioned in the product listing, although kinda visible in the photo. I ordered the separate rubber washer parts recommended by Appliance Parts Pros together with the heater element. The separate rubber washers were the...
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: W10619006
The Door Latch Assembly is an OEM part for Whirlpool dishwashers. It ensures a secure latch and seal for the dishwasher door during operation.
Causes of a bad dishwasher door latch assembly can include worn-out or broken latch components, damaged or malfunctioning door switches, or misalignment of the latch mechanism.
Symptoms of a bad Dishwasher Door Latch Assembly include:
- Difficulty in closing or latching the dishwasher door
- The dishwasher not starting or running when the door is closed
- Leaks or water spills around the door area
- Inconsistent or intermittent operation of the dishwasher
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Dishwasher would not run William H. • Morehead City , NC • February 14, 2015
I found the door switch was not making contact when the door closed. I adjusted it, but then it would not open so the dishwasher would run when the door wasn't closed.
The contacts were too long in the switch so they would bend and stay together when the door opened. The original switch was very poorly made for a very expensive Maytag dishwasher.
The new switch you supplied was much better quality and easily replaced the one that was installed at the factory.
I was a little baffled at the...
Read more
More
$33.95
- Compare At:
-
$40.06
- You Save:
-
$6.11
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8269145
The Undercounter Bracket is an OEM replacement part for Whirlpool dishwashers. It is a sturdy mounting component that secures the dishwasher in place under the kitchen counter, ensuring a stable and secure installation.
Symptoms of a damaged or missing undercounter bracket include:
- The dishwasher shifting or moving during operation
- Difficulty in opening or closing the dishwasher door
- Potential for leaks or water damage due to an unstable installation
Causes of a faulty undercounter bracket can include improper installation, physical damage from impact or mishandling, or wear and tear over time.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Undercounter brackets broke Annette H. • Avenal , CA • March 23, 2014
Ordered new brackets from parts pro.com
Got in 3 days
And installed , dishwasher doesn't fall out of counter anymore when you pull out the shelves.
Read more
More
$14.62
- Compare At:
-
$17.54
- You Save:
-
$2.92
Genuine Whirlpool part
By: Whirlpool
Part Number: 8269144A
The Drain Hose is an OEM part for Whirlpool dishwashers. This flexible hose is designed to carry waste water from the dishwasher to the kitchen drain system or garbage disposal, ensuring that the dishwasher drains properly after each wash cycle.
Causes of damage to the Drain Hose often involve regular wear and tear, bending or kinking of the hose during installation or maintenance activities, or deterioration over time due to exposure to hot water and detergents.
Symptoms of a bad Drain Hose include:
- Water remaining in the bottom of the dishwasher after a cycle
- Leaks found under or behind the dishwasher, which could be due to holes, cracks, or loose connections in the drain hose.
- Unpleasant odors emanating from the dishwasher, potentially caused by food particles or debris caught in a hose that is not draining correctly.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Dishwasher stopped draining water the pump was running (i could hear the noise) but water would not go away Evgueni P. • San Mateo , CA • February 08, 2015
I've opened sump housing to check for clogging but it was clean. When I removed check valve to inspect it I've found out that the round part of the valve was missing so I figured it might've blocked the water exit at drain hose or something like that. So I pulled the dishwasher out to get a full access to drain hose connector and the pump. Upon disconnecting the drain and checking its connector I indeed found the round piece totally blocking the hose and acting as a seal. I removed the piece...
Read more
More
$23.95
- Compare At:
-
$28.26
- You Save:
-
$4.31
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10705575
The Turbidity Sensor is an OEM part for Whirlpool dishwashers. It detects the level of particles in the water during the wash cycle, allowing the dishwasher to adjust the cycle duration and water usage for optimal cleaning performance. This sensor ensures that dishes are thoroughly cleaned by monitoring water clarity.
You should replace the turbidity sensor if it becomes faulty or damaged. Causes of a bad turbidity sensor can include regular wear and tear, exposure to hard water minerals, or electrical malfunctions. A malfunctioning sensor can lead to inefficient cleaning cycles and poor wash results.
Symptoms of a bad turbidity sensor include:
- Dishes not being cleaned properly
- Dishwasher running longer than usual or shorter cycles
- Error codes related to the sensor
- Inconsistent wash performance
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
F7 e1 error code water not getting hot. David F. • Austin , TX • September 14, 2021
My wife said we have a problem with our dishwasher (Whirlpool WDT920SADE2). The dishes were not getting clean, and the soap dispenser opened, but soap was still dribbled down the inside of the door and on the silverware caddy.
I'm not the handiest guy; it took me several days to go through the trouble-shooting process, watching multiple videos and trying different things. My initial guess was that the soap dispenser was opening too late. (This turned out to be wrong.)
I started off by...
Read more
More
$31.37
- Compare At:
-
$37.33
- You Save:
-
$5.96
Genuine Whirlpool part
By: Whirlpool
Part Number: W10872845
The pump filter is an OEM part for Whirlpool dishwashers. It is responsible for trapping large particles, preventing them from entering the pump and potentially causing blockages or malfunctions.
A bad filter can occur due to regular use, accumulation of debris, or wear and tear over time.
Symptoms of a bad pump filter include:
- Dirty or cloudy dishes after a cycle.
- Noisy operation, such as grinding or rattling sounds.
- Water pooling at the bottom of the dishwasher.
- Foul odors in the dishwasher.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
I washed a candle in my dishwasher ?? Mary H. • Lee's Summit , MO • March 11, 2017
Ordered a new screen and filter. While waiting for arrival, removed wax covered dishes. Carefully removed wax filled filter and screen cover. Stuffed paper towels in hole to absorb water and prevent wax from entering pump. Prayed ????wax had not entered pump. With plastic knife removed visible wax. Wiped out with paper towels. Used entire roll. Used hair dryer to melt remaining wax and wiped every inch of racks, wheels, glides, silverware holder, seal, floor and so forth. Oh yes I did. At 1:30...
Read more
More
$45.95
- Compare At:
-
$54.68
- You Save:
-
$8.73
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10350401
The Upper Rack Roller Wheel Assembly is an OEM part for Whirlpool dishwashers. This assembly includes a single roller wheel and the mounting hardware, which are crucial for the smooth gliding of the dishwasher's upper rack.
Symptoms of a failing Upper Rack Roller Wheel Assembly include:
- The upper rack sticking or struggling to slide in and out
- A grinding or squeaking noise when the rack is moved
- The rack sagging or tilting, indicating that a wheel may be broken or missing
- Difficulty in securing the rack in its proper position
Causes of a bad roller wheel assembly often involve regular wear and tear, accumulation of debris in the rollers, or damage from overloading the rack. These factors can lead to the wheels cracking or the bearings within the rollers seizing up.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Top rack tracks and stoppers were broken Martina B. • Helotes , TX • December 19, 2015
I searched the model on Appliancepartspros.com and ordered the items needed with overnight shipping. My order came the next day :) All parts were in stock and came clearly labeled and orderly packaged. Within 10 minutes my dishwasher was back in business and I was one happy camper.
I would order from here again anytime and attempt to fixt the issue myself. Much cheaper that having somebody come out, only to tell you that they have to order the parts and come back at a later time to fix the...
Read more
More
$41.35
- Compare At:
-
$49.62
- You Save:
-
$8.27
Genuine Whirlpool part
By: Whirlpool
Part Number: W11032770
The Pump and Motor Assembly is an OEM part for Whirlpool dishwashers. This assembly is crucial for circulating water throughout the dishwasher during the wash and rinse cycles. It ensures that water is distributed effectively to clean dishes and then drained out of the appliance after the cycle is completed.
Causes of a bad pump and motor assembly can include wear and tear from regular use, blockages from food particles or debris, electrical issues, or damage to the motor or impeller. Such issues can severely affect the performance of the dishwasher.
Symptoms of a bad pump and motor assembly include:
- The dishwasher not draining properly or leaving water at the bottom
- Unusual noises during operation, such as grinding or humming
- Inadequate cleaning results due to poor water circulation
- The dishwasher not starting or stopping mid-cycle
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Leak from under KitchenAid dishwasher misdiagnosed by technician David B. • Freeport , NY • August 21, 2020
My dishwasher was leaking and I called to have a certified technician come to diagnose the problem. I removed the kick panel from the bottom of the machine. He turned it on and we saw that water was leaking from the bottom. He said I needed a Sump kit but it wasn't in stock. The cost was $170 plus tax and labor cost was another $140. So I talked it over with dad and ordered the Sump kit, the hose clamp and a new diverter motor as mine was yellowed with age. The cost of all these parts and...
Read more
More
$154.95
- Compare At:
-
$212.62
- You Save:
-
$57.67
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10195039
The Water Level Switch is an OEM part for Whirlpool dishwashers. It monitors and regulates the water level inside the dishwasher during wash cycles, ensuring the correct amount of water is used for optimal cleaning performance.
The water level switch can fail due to several reasons, such as electrical issues, mechanical wear over time, or damage from water exposure. Blockages or debris can also interfere with its proper functioning.
Symptoms of a bad water level switch include:
- The dishwasher not filling with water
- Overfilling or flooding inside the dishwasher
- The dishwasher stopping mid-cycle or not progressing through cycles
- Error codes related to water levels
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The dishwasher was leaking from the water level float David C. • Whippany , NJ • January 20, 2019
Ordered 6 parts from you thanks to your fantastic web schematic parts diagram received parts very fast changed parts easily and that leak stopped. Your company is a 5* operation hands down.
Read more
More
$42.95
- Compare At:
-
$51.11
- You Save:
-
$8.16
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10195536
The Inlet Assembly is an OEM part for Whirlpool dishwashers. It is responsible for controlling the flow of water into the dishwasher during the wash cycle. This assembly ensures that the correct amount of water enters the dishwasher to clean dishes effectively.
You should replace the inlet assembly if it becomes faulty. Causes of a bad inlet assembly can include wear and tear from regular use, blockages from debris or mineral buildup, or electrical issues. A malfunctioning inlet assembly can lead to inadequate water flow, which affects the dishwasher’s cleaning performance.
Symptoms of a bad inlet assembly include:
- The dishwasher not filling with water or filling slowly
- Water leaks around the inlet area
- Error codes related to water intake issues
- The dishwasher stopping mid-cycle or not starting
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Jenn airJDB8000AWS3 dishwasher would not drain Lynden B. • Benicia , CA • December 17, 2019
Dishwasher washer would not drain after hearing glass-like particles during the drain cycle despite trying to clean the cylinder filter. Originally suspected the drain motor was damaged. After watching a video on how to replace the drain pump, I carefully energized the dishwasher (from water and electricity) then removed the dishwasher to take a look. After removal of drain hose from the pump, discovered that drain hose was connected to water inlet assembly which also needed removal to...
Read more
More
$61.95
- Compare At:
-
$73.72
- You Save:
-
$11.77
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8531743
The Float Switch Base Gasket is an OEM part for Whirlpool dishwashers. This gasket is specifically designed to seal the area around the float switch base, preventing water leaks that can occur during the dishwasher's operation.
Causes of damage to the Float Switch Base Gasket often involve normal wear and tear, as the rubber or plastic material can degrade over time due to exposure to detergents, hot water, and the mechanical action of the float switch.
Symptoms of a bad Float Switch Base Gasket include:
- Water leaking from the bottom of the dishwasher
- Signs of water damage or corrosion around the float switch area
- The dishwasher may malfunction or display error codes related to water filling issues if water leaks interfere with the float switch operation.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The dishwasher was leaking from the water level float David C. • Whippany , NJ • January 20, 2019
Ordered 6 parts from you thanks to your fantastic web schematic parts diagram received parts very fast changed parts easily and that leak stopped. Your company is a 5* operation hands down.
Read more
More
$38.70
- Compare At:
-
$46.44
- You Save:
-
$7.74
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10605057
The Pump and Motor Assembly is an OEM part for Whirlpool dishwashers. It is crucial for circulating water throughout the dishwasher during the wash and rinse cycles, ensuring efficient cleaning of the dishes.
You should replace this pump and motor assembly if it becomes defective or worn out. Causes of a bad pump and motor assembly can include regular wear and tear, blockages from food particles or debris, and damage from hard water deposits. A malfunctioning assembly can lead to poor water circulation, affecting the dishwasher's cleaning performance.
Symptoms of a bad pump and motor assembly include:
- Inadequate cleaning of dishes
- Unusual noises during the wash cycle
- Water not draining properly from the dishwasher
- Error codes related to water circulation or drainage issues
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Stopped washing dishes would finish cycle with mucky water in the sump Michel S. • Costa Mesa , CA • September 16, 2016
I think I could have just replaced the pump, but I chose to replace the whole assembly. The part is more expensive, but all the gaskets, etc, that come with it are new and that made sense to change all at once.
I was able to change this in about 30 minutes, without removing the washer from the under-counter space. I did remove the front door panel, but in retrospect that was unnecessary and probably cost me more time than it saved.
Empty the washer of parts, remove the front access panel....
Read more
More
$192.75
- Compare At:
-
$229.37
- You Save:
-
$36.62
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8270020
The Door Balance Spring is an OEM part for Whirlpool dishwashers. This part provides tension and balance to the dishwasher door, ensuring it opens and closes smoothly and stays in the desired position when loading or unloading dishes.
Causes of damage to the door balance spring can include normal wear and tear from frequent use, corrosion due to moisture and detergent exposure, or mechanical failure from excessive force being applied to the door.
Symptoms of a bad Door Balance Spring include:
- The dishwasher door falling open too quickly or with too much force
- Difficulty in keeping the door open or having it snap shut unexpectedly
- A noticeable difference in the effort required to open or close the dishwasher door
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Door handle on 2002 model maytag dishwasher broken Thomas H. • Fort Worth , TX • October 17, 2014
I called a local repair center who estimated $300+ to fix this. I bought a door handle and door latch for $~100 and fixed my dishwasher in about 10 mins. I ordered the parts on Sunday, they arrived on Tuesday. Very happy with appliance parts pros and would recommend them.
Read more
More
$26.95
- Compare At:
-
$32.07
- You Save:
-
$5.12
Genuine Whirlpool part
By: Whirlpool
Part Number: W10831329
The Toe Panel Insulation is an OEM part for Whirlpool dishwashers. This part was designed to enhance the appliance's performance by reducing noise and preventing heat escape from the bottom of the dishwasher. This insulation panel fits snugly behind the dishwasher's toe panel, which is located at the lower front part of the unit.
Causes of a bad Toe Panel Insulation might include wear and tear over time, damage during appliance installation or removal, or deterioration due to moisture exposure.
Symptoms of inadequate or damaged Toe Panel Insulation include:
- Noticeable increase in noise level from the dishwasher, making it more disruptive during its operation.
- Excess heat felt near the base of the dishwasher, indicating heat loss.
- Potential for condensation or slight temperature changes in the kitchen due to the heat emitted from the dishwasher.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Sound insulation behind dishwasher toe kick panel became soiled from spill. Dwayne W. • Shermans Dale , PA • November 30, 2017
Ordered new insulation from AppliancePartsPros. It was delivered quickly and easy to install.
Read more
More
$32.42
- Compare At:
-
$38.90
- You Save:
-
$6.48
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10327455
The Upper Spray Arm is an OEM part for Whirlpool dishwashers. It is responsible for distributing water throughout the upper part of the dishwasher during the wash cycle, ensuring dishes are cleaned effectively.
Causes of a bad upper spray arm can include clogging from food particles, mineral deposits from hard water, or physical damage to the spray arm. These issues can impede the spray arm's ability to rotate and distribute water properly.
Symptoms of a bad upper spray arm include:
- Poor cleaning performance on the top rack
- Spray arm not spinning
- Visible damage or clogging of the spray arm holes
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Note: For the spray arm retainer, use part number WP3400918.
Do-It-Yourself Stories from Customers like You
Arm spray on dishwasher Beth N. • Brookings , OR • July 09, 2017
Funny, my husband did it. We have a service contract but you know how long that still takes. So he found the part at the bottom of the dishwasher and it had a number on it. He went to your site and and found the part. Yes it was a little cheaper else where like everything else but what the other sites didn't have he said was the video on how to do it. He explained he felt that takes money to produce so the few dollars more were worth it to him and he can be cheap. We had it in two days like you...
Read more
More
$51.27
- Compare At:
-
$60.50
- You Save:
-
$9.23
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10195091
The High Limit Thermostat is an OEM part for Whirlpool dishwashers. It is a safety device that monitors the temperature inside the dishwasher and cuts off power to the heating element if the water temperature exceeds safe levels, preventing overheating and potential damage.
Causes of a bad high limit thermostat can include normal wear and tear, exposure to high temperatures, or electrical faults. A faulty thermostat can prevent the dishwasher from heating water correctly, affecting the cleaning performance.
Symptoms of a bad high limit thermostat include:
- Dishwasher not drying dishes properly
- Dishwasher not completing cycles
- Water not heating up during cycles
- Error codes related to temperature issues
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Groaning sounds. Leaking under dishwasher. Failing to clean dishes and melting dishes. Dan G. • Wheaton , IL • July 20, 2018
Replaced sump, wash pump, drain pump, diverter motor, and thermostat.
Read more
More
$40.95
- Compare At:
-
$49.14
- You Save:
-
$8.19