Samsung Dryer DV501AGW Parts
Genuine Samsung part
By: Samsung
Part Number: 6602-001655
Drives drum rotation for even drying. Replace if dryer won't spin, makes squealing sounds, or clothes stay wet. Confirm fit with your model number.
Do-It-Yourself Stories from Customers like You
The idler wheel bearings were shot and the dryer was making high pitch squeaks because of it Douglas S. • Kennesaw , GA • March 06, 2016
From watching the video I got the general idea, disassemble 50% of the dryer. Only had 2 differences in my dryer from the one used in the video, so the video was helpful. The one difference was the connections to the front side of the dryer were on the power distribution circuit board located on the left of the dryer under a sheet metal cover. These were harder to disconnect with my fat thumbs. The bigger issue was with removing the front control panel. In the video there doesn't appear to be...
Read more
More
$54.66
- Compare At:
-
$65.05
- You Save:
-
$10.39
Genuine Samsung part
By: Samsung
Part Number: DC32-00007A
Dryer not heating or drying inconsistently? A faulty thermistor causes temperature control issues. Direct repair—moderate difficulty, 30-45 minutes.
This part fixes the following symptoms
-
Takes too long to dry
-
Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You
Samsung dryer model# DV42H5200EW would not heat no error codes otherwise operating normally. James S. • Washington , DC • October 20, 2017
You can do this!
Although an Art Director by trade, I like working with my hands. I’m adept at working with tools and following instructions. In today’s disposable society, I prefer fixing things. That said, this has to be the easiest repair I’ve ever attempted with the largest cost-savings versus hiring a professional.
My brand new dryer had been in use fewer than six months (average 6 loads per week) when suddenly the dryer would not heat. The drum would spin, there were no error codes, and...
Read more
More
$30.54
- Compare At:
-
$36.34
- You Save:
-
$5.80
Genuine Samsung part
By: Samsung
Part Number: DC93-00634A
Maintains belt tension in your dryer drum system. Replace if the pulley wheel is worn, cracked, seized, or the tensioner arm is bent or broken.
Do-It-Yourself Stories from Customers like You
The idler wheel bearings were shot and the dryer was making high pitch squeaks because of it Douglas S. • Kennesaw , GA • March 06, 2016
From watching the video I got the general idea, disassemble 50% of the dryer. Only had 2 differences in my dryer from the one used in the video, so the video was helpful. The one difference was the connections to the front side of the dryer were on the power distribution circuit board located on the left of the dryer under a sheet metal cover. These were harder to disconnect with my fat thumbs. The bigger issue was with removing the front control panel. In the video there doesn't appear to be...
Read more
More
$60.95
- Compare At:
-
$71.92
- You Save:
-
$10.97
Genuine Samsung part
By: Samsung
Part Number: DC47-00016A
This thermal fuse is a safety device mounted on or near the blower housing inside the dryer. It is designed to blow and cut power to the dryer if the internal temperature exceeds a safe limit, preventing potential fire hazards. Replace this fuse if the dryer will not start or has no power at all - a blown thermal fuse is one of the most common reasons a dryer stops running completely.
Do-It-Yourself Stories from Customers like You
Samsung dryer model# DV42H5200EW would not heat no error codes otherwise operating normally. James S. • Washington , DC • October 20, 2017
You can do this!
Although an Art Director by trade, I like working with my hands. I’m adept at working with tools and following instructions. In today’s disposable society, I prefer fixing things. That said, this has to be the easiest repair I’ve ever attempted with the largest cost-savings versus hiring a professional.
My brand new dryer had been in use fewer than six months (average 6 loads per week) when suddenly the dryer would not heat. The drum would spin, there were no error codes, and...
Read more
More
$28.31
- Compare At:
-
$33.69
- You Save:
-
$5.38
Genuine Samsung part
By: Samsung
Part Number: DC97-16782A
Supports and allows the dryer drum to rotate smoothly. Replace when roller bearing seizes, develops flat spots, or shows wear causing noise or drag.
Do-It-Yourself Stories from Customers like You
My Samsung dryer was making a grinding noise when running. Willie K. • Albuquerque , NM • July 11, 2022
I first researched on AppliancePartsPros.com the availability of parts. It looked like all common parts were in stock ready to ship. I also found that APP had several helpful videos to show how to take apart the dryer and replace the parts. Other research indicated the most common problem is the drum rollers, but after seeing the videos I determined that not only the rollers but also the tensioner pulley could be bad and the belt too. So I bought all of these parts because I did not want to...
Read more
More
$58.95
- Compare At:
-
$70.15
- You Save:
-
$11.20
Genuine Samsung part
By: Samsung
Part Number: DC61-02627A
The Dryer Moisture Sensor is a reliable component designed to ensure your dryer operates efficiently. This genuine OEM part accurately detects moisture levels in your laundry, allowing the dryer to adjust drying times automatically. By maintaining optimal moisture sensing, it helps prevent over-drying and energy waste, ultimately saving you time and reducing utility costs. Compatible with a wide range of Samsung dryer models, the Dryer Moisture Sensor guarantees a perfect fit and seamless integration into your appliance. Installing this sensor can restore your dryer's performance, ensuring your clothes are perfectly dried every cycle. Trust in this genuine OEM part to enhance the functionality and longevity of your Samsung dryer, providing you with dependable and efficient drying results.
This part fixes the following symptoms
-
Takes too long to dry
-
Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You
Ran for 5 to 7 seconds and stopped. Paul K. • Dayton , TX • November 04, 2017
I researched the issue on You tube and found out it could be either the "belt broke switch" or the Moisture sensor. A friend who was an appliance mechanic advised "since you have to take it all apart anyways, its best to replace the belt, spring, and Idler wheel" I bought the 5 item for $52. I watched the video on the AppliancePartsPros for changing out the belt and I replace all items on the list. Took 1 1/2 hrs and was fixed on restart!! * Wear gloves, the sheet metal is very sharp edges!*
Read more
More
$13.95
- Compare At:
-
$16.74
- You Save:
-
$2.79
Genuine Samsung part
By: Samsung
Part Number: DC61-05489A
Holds the lint screen and channels exhaust air through the filter. Replace if cracked, broken, or no longer securely holding the screen. Verify fit by model.
Do-It-Yourself Stories from Customers like You
Cover filter was broken on end spring missing (wife missplaced it when found) David F. • Richland , WA • April 24, 2016
Found AppliancePros online and identified parts. Parts ordered, received in a few days and installed parts. Easypeasy....!
Thank You
Dave
Read more
More
$164.95
- Compare At:
-
$196.29
- You Save:
-
$31.34
Genuine Samsung part
By: Samsung
Part Number: DC61-01215B
Maintains tension on the idler pulley to keep the drum belt tight. Replace if the spring is stretched, broken, or missing to restore proper belt operation.
Do-It-Yourself Stories from Customers like You
The idler wheel bearings were shot and the dryer was making high pitch squeaks because of it Douglas S. • Kennesaw , GA • March 06, 2016
From watching the video I got the general idea, disassemble 50% of the dryer. Only had 2 differences in my dryer from the one used in the video, so the video was helpful. The one difference was the connections to the front side of the dryer were on the power distribution circuit board located on the left of the dryer under a sheet metal cover. These were harder to disconnect with my fat thumbs. The bigger issue was with removing the front control panel. In the video there doesn't appear to be...
Read more
More
$13.95
- Compare At:
-
$16.74
- You Save:
-
$2.79
Genuine Samsung part
By: Samsung
Part Number: DC31-00055G
Motor hums but won't start? Replace your dryer drive motor to fix startup failure. Moderate DIY repair with video guide. Restores drum rotation.
Do-It-Yourself Stories from Customers like You
Dryer motor Dave B. • Worton , MD • April 19, 2016
After watching the how to video twice I decided to embark on dismantling my dryer and attempting to replace my motor. After realizing that the main tool needed was a Phillips screwdriver I was sure I could handle this repair. One by one I took apart the dryer and spread out the parts throughout my mud room. 1.5 hrs later and I have a working dryer, and most of all a happy wife. Thanks for the speedy part delivery and the great how to video.
Read more
More
$296.95
- Compare At:
-
$350.40
- You Save:
-
$53.45
Genuine Samsung part
By: Samsung
Part Number: DC64-00828B
Dryer won't start or keeps running with door open? The door switch detects door position for safe operation. DIY-friendly repair with video guide.
Do-It-Yourself Stories from Customers like You
I accidentally stepped on the door of my Samsung dryer. The door is intact but brackets bent. Margaret C. • Tampa , FL • June 07, 2018
I am so blessed. I went online. Found the brackets. Watch the video for the brackets I chose. And lucky me. I did not have to pull the dishwasher out. The installer did not have it flush under the counter. So I was able to pull the dishwasher forward unhook the damage brackets and insert the new. Put the dishwasher back in. Two screws. Now the balanced and secure dishwasher washes better than ever and I did not have to pay an extraordinary fee for a repairman. I'm 68 and take care of a 72 year...
Read more
More
$50.76
- Compare At:
-
$60.40
- You Save:
-
$9.64
Genuine Samsung part
By: Samsung
Part Number: DC67-00180B
Fix loud grinding or squealing noises from a broken blower wheel. Restores proper airflow in your dryer. DIY-friendly repair, typically 30 minutes.
This part fixes the following symptoms
-
Too hot
-
Takes too long to dry
-
Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You
Dryer was making loud rubbing noise Jennifer D. • Milton , GA • August 15, 2016
Did google search and found youtube diagnostic and repair video. Blower wheel was warped and rubbing on the cover. We ordered a new blower wheel and followed youtube instructions to install new blower wheel.
Read more
More
$120.95
- Compare At:
-
$143.93
- You Save:
-
$22.98
Genuine Samsung part
By: Samsung
Part Number: DC97-16931B
The Dryer Knob Encoder Assembly is an essential component for Samsung dryers, ensuring precise control of your appliance's settings. This genuine OEM part guarantees a perfect fit and reliable performance, allowing you to easily adjust drying cycles and temperatures with confidence. Crafted for durability, the Dryer Knob Encoder Assembly enhances the functionality of your dryer by accurately translating knob movements into electronic signals, resulting in consistent and efficient drying results. Installation is straightforward, making it a convenient solution for restoring your dryer's performance without the need for professional assistance. Whether your original encoder is worn out, unresponsive, or damaged, this Dryer Knob Encoder Assembly provides a seamless replacement that maintains the quality and efficiency of your Samsung dryer. Improve your drying experience with this dependable part, designed to keep your appliance running smoothly and extend its lifespan.
Do-It-Yourself Stories from Customers like You
The washer set button knob broke. Philip R. • Shiloh , IL • July 31, 2022
Ordered a new knob and took out little bits of the old one. Took the new knob and pressed it over the stump and presto works like new.
Read more
More
$68.45
- Compare At:
-
$81.46
- You Save:
-
$13.01
Genuine Samsung part
By: Samsung
Part Number: DC63-01140A
Replaces broken or cracked lint filter cover on your dryer. Covers the filter opening when filter is removed to prevent clothes from entering the blower.
Do-It-Yourself Stories from Customers like You
Cover filter was broken on end spring missing (wife missplaced it when found) David F. • Richland , WA • April 24, 2016
Found AppliancePros online and identified parts. Parts ordered, received in a few days and installed parts. Easypeasy....!
Thank You
Dave
Read more
More
$31.35
- Compare At:
-
$37.31
- You Save:
-
$5.96
Genuine Samsung part
By: Samsung
Part Number: DC47-00017A
Dryer won't heat or stops heating mid-cycle? The high limit thermostat cuts power when temperatures spike. Easy 15-minute fix with video guide.
Do-It-Yourself Stories from Customers like You
My dryer would not heat up Chris R. • Glen Saint Mary , FL • January 07, 2015
When starting my dryer the motor would power up and rotoe the drum and blower. Afetr about 20-30 seconds the igniter would come on then the gas valve would open and I would get heat for about 6 or 7 seconds then it would shut off. I know the burner is suppoed to cycle on and off but once the burner shut off it would not come bqack on unless I shut the dryer off and then back on. I checked for continuity on the thermistor, the thermal fuse and the high temp sensor. All three of them appeared to...
Read more
More
$82.47
- Compare At:
-
$98.14
- You Save:
-
$15.67
Genuine Samsung part
By: Samsung
Part Number: DC47-00022A
Dryer not heating? The igniter lights the gas burner to generate heat. This fragile ceramic part can crack or break during installation. DIY repair.
Do-It-Yourself Stories from Customers like You
Samsung dryer model dv395gtpasu/a1 operation as normal but without heat Khanh T. • Fountain Valley , CA • May 09, 2016
Replaced the following parts but did not fix the problem:
-Thermister
-Thermal fuse
-Radiant sensor
-Ignitor
-Therm
The problem was the Centrifugal switch. Took the switch apart and use fine grid sand paper to clean the contacts. Put it back and working.
Read more
More
$172.95
- Compare At:
-
$207.54
- You Save:
-
$34.59
Genuine Samsung part
By: Samsung
Part Number: DC61-02740A
Secures the lint filter cover in your dryer. Replace if the spring is missing, broken, or damaged, causing the filter cover to not stay in place properly.
Do-It-Yourself Stories from Customers like You
Cover filter was broken on end spring missing (wife missplaced it when found) David F. • Richland , WA • April 24, 2016
Found AppliancePros online and identified parts. Parts ordered, received in a few days and installed parts. Easypeasy....!
Thank You
Dave
Read more
More
$6.41
- Compare At:
-
$7.69
- You Save:
-
$1.28